---
product_id: 432714103
title: "Groz35122 5'' Uni-Grip Drill Press Vise Clamp"
price: "€ 274.67"
currency: EUR
in_stock: true
url: https://www.desertcart.com.cy/products/432714103-groz35122-5-uni-grip-drill-press-vise-clamp
store_origin: CY
region: Cyprus
---

# Groz35122 5'' Uni-Grip Drill Press Vise Clamp

**Price:** € 274.67
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Groz35122 5'' Uni-Grip Drill Press Vise Clamp
- **How much does it cost?** € 274.67 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.com.cy](https://www.desertcart.com.cy/products/432714103-groz35122-5-uni-grip-drill-press-vise-clamp)

## Best For

- Customers looking for quality international products

## Why This Product

- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Groz35122 5'' Uni-Grip Drill Press Vise Clamp

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0785GGZ46 |
| Batteries Required? | No |
| Best Sellers Rank | #725,845 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #515 in Bench Vises |
| Brand | Groz |
| Color | Black |
| Customer Reviews | 4.6 4.6 out of 5 stars (100) |
| Date First Available | February 13, 2018 |
| Global Trade Identification Number | 08901486351223 |
| Included Components | Uni-Grip Drill Press Vise |
| Item Package Quantity | 1 |
| Item Weight | 9.9 ounces |
| Item dimensions L x W x H | 15.35 x 8.74 x 3.5 inches |
| Item model number | DPV/UG/125 |
| Manufacturer | Groz |
| Material | Cast Iron |
| Measurement System | US |
| Part Number | 35122 |
| Product Dimensions | 15.35 x 8.74 x 3.5 inches |
| Size | 5" Jaw Width |
| Style | Drill Press Vices - Unigrip |

## Product Details

- **Brand:** Groz
- **Color:** Black
- **Global Trade Identification Number:** 08901486351223
- **Item Weight:** 0.28 Kilograms
- **Item dimensions L x W x H:** 15.35 x 8.74 x 3.5 inches
- **Manufacturer:** Groz
- **Material:** Cast Iron
- **Style:** Drill Press Vices - Unigrip

## Images

![Groz35122 5'' Uni-Grip Drill Press Vise Clamp - Image 1](https://m.media-amazon.com/images/I/81LwA0LFxnL.jpg)

## Questions & Answers

**Q: would someone please change the picture to the right vice? I am not going to buy until you care enough to correct your mistake.**
A: My vice matches this picture....

**Q: What country is this made in?**
A: Groz product is made in India.

**Q: Can someone tell me the height from the drill press table to the rail where the workpiece would set at bottom of jaws?**
A: JAW LINERS
Wooden liners expand your vise’s holding
capacity and prevent your work from being
marred by the cast iron jaws. Any
hardwood will work as a liner material. The
front jaw liner should be at least 1 5/8”
thick to prevent deflection and so you can
drill holes in the top of the liner for bench
dogs if you like. The rear jaw only needs to
be 3/4 – 1” thick because it will be
supported by the edge of the bench. For
small vises (7” wide), make the liner length
12 – 14”. Medium sized vises (9” wide) can handle liners 14-16” in length. You can go up to 18”
long for large vises (10” wide). Anything longer will cause excessive racking and shorten the life
of your vice. In the end, the jaw liners need to be at least 1/8” above the vise’s guide posts to
allow for seasonal movement and flush with the top of the bench. However you choose to
attach your jaw liners to your vise, make they can be easily removed if they become damaged
or warped. At this point, close the vise and make sure the liners mate up acceptably and shim if
necessary. Remember, the jaws of these vises toe in where they meet at the top and should do
so after the liners are installed.
MOUNTING THE VISE
Depending on your bench’s top thickness, you have two mounting options. If your top is at
least 2” thick, lag screws work fine. With washers attached, run the lags up from underneath
the vise’s carriage, through the spacer block and into the underside of the bench top. If your
top is less than 2” thick, install carriage bolts right through the bench top and secure them with
nuts and washers under the vise’s carriage. Be sure to countersink the heads of the bolts below
the surface of the top to prevent tool or work damage. Plug or fill the holes by any method that
pleases you. With either mounting technique, you’ll want to occasionally check the hardware to
be sure it isn’t working loose. As for maintenance, lubricate the threads of the main screw with
light oil and wax the guide rods occasionally.

**Q: What is the center to center distance between the hold down slots in the mounting base?**
A: The center to center (front to back of vise) is 3.75" +/-.  Nicely made tool, with a high rabbet on the jaws for holding thin material.

## Frequently Bought Together

- Groz 35122 5" Uni-Grip Drill Press Vise, Powder Coated
- SPEED TIGER Micrograin Carbide Square End Mill - 4 Flute - ISE7/64 4T (5 Pieces, 7/64") - for Milling Alloy Steels, Hardened Steel, Metal & More – Mill Bits Sets for DIYers & Professionals
- Mobil 100772 Vactra Oil No.2 Way Oil, 1 gal

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.com.cy/products/432714103-groz35122-5-uni-grip-drill-press-vise-clamp](https://www.desertcart.com.cy/products/432714103-groz35122-5-uni-grip-drill-press-vise-clamp)

---

*Product available on Desertcart Cyprus*
*Store origin: CY*
*Last updated: 2026-02-20*