Oversteel - Azurite Gaming PC Case Compatible with ATX, Micro ATX and ITX Boards, 4 120mm A-RGB Fans Included, Mesh Front, Vertical Installation, Tempered Side Glass, USB 3.0, White

This case is really nice and well made.It has fantastic airflow and my CPU, which is a Ryzen 5 5600, is currently running at 35c with the stealth wraith stock cooler.The case is spacious and has a good cable management for a tidy build.Space for 3 SSD or 2 SSD and 1 HDD.I have an Asus rtx 4070 dual oc card and this fits in with an abundance of room. Therefore a standard 4070 with three fans would easily be accomodated.The case comes with all screws needed for mounting the motherboard (ATX, micro ATX), storage drives, power supplies etc and even has approx 6 black cable ties for your cable management if you wish to tidy up around the back.The fans are all RGB and are connected using one of the sata power cables from the PSU. The fans are all connected via a pre installed controller and are all preconnected to this also. I have plugged the header on to the system fan on myotherboard but I don't believe they're pwm fans so in the bios you don't get speed measurements etc. They're basically on full speed as soon as the pc is switched on, which is perfectly fine and is really the safest way to gain persistent, high cold airflow. There is a 4 pin connector for connecting to Asus/MSI motherboard where you can potentially control the RGB colours but I have a gigabyte board and that doesn't appear to work even though I had the same argb type 4 pin header on the board...Nevertheless the RGB element can be controlled via two ways. An included remote with a multitude of settings, 3 levels of brightness, multiple effect modes, flashing, breathing, solid etc... it has a lovely array of colours that all are synchronized. Also, there is a manual button on the top of the case where you can cycle through all the colours and effects but this can take a while as there are so many. The remote comes with a battery, watch type, but I had to replace that as it was doa and then it works absolutely fine.I'm really pleased with the appearance. Looks fantastic, high end and is very practical. I had no problems building my pc and I'm super impressed with the airflow capability as everything, including my GPU run so cool now, and of course this shall extend the lifespan of the components exponentially.For this point alone it is worth getting.It is also very solid and the fans are very quiet, even under heavy gaming load. The metal is sturdy, the feet are good and the clear side panel is solid tempered glass.It also has magnetic dust covers etc.10/10. Realy pleased with this purchase, would recommend and would buy again. I have had Corsair etc before and this is as good in my opinion and a great price.Edit: the 4 pin argb does work absolutely fine for Gigabyte boards. It was my error. On the led remote supplied with the case is a button, top right, that looks like a graphics equaliser. This switches the RGB fan controls to your pc and then with the gigabyte RGB fusion software I can change colours, effevts, brightness and create favourites. By pressing this button again on the remote you then use the remote to control the RGB fan LEDs again. Of course the case manual button works regardless. Great case, it does everything very,very well.

I purchased this case as part of the Prime day deals, I paid £29.99 for it. Personally I don't think you will find another case for that kind of money as good as this one.I have built many PC's is many different types of case, from budget cases ranging from under £20 to high end cases costing over £200.Pro's - it has good airflow with the mesh front and top, it comes with 2 ARGB fans as standard, although don't expect them to be the best for air flow.Cable management is better than a few of the reviews I have read about this case would leave you to believe (on par, or slightly better than most sub £50 cases, I didn't even need to use any self adhesive cable tie holders, which I use in most budget builds and even in a lot more expensive cases)Not only does it have a glass side panel (most budget cases come with perspex that is easy to scratch), but it is a hinged glass side panel, not one thats held in with thumb screws, the magnets that hold it in are nice and powerful too.Perfect size for an MATX motherboard, has routing holes for the cables in good placesUnlike one of the reviews I read mentioned, I had absolutely no issues getting the backplate from an entry level motherboard to pop in (it's a skill that I have mastered with hundreds of builds under my belt)If your motherboard has a 3 pin ARGB plug on it, you can control the LED's by the motherboards softwareCons- you will probably want to invest in extra fans as the included ones don't move a lot of airI absolutely love this case and would gladly use it for any budget build if I can get it for under £30, especially since my current favourite budget case (the CIT Sauron) has recently gone up in price with my trade supplier and also the importer.Personally I think you could easily get a 240 AIO cooler in this case and I would bet a 360 would also fit (as long as you don't have a massive graphics card), infact if Oversteel is reading this review and you want to send me another one, I will happily do a build to show off how to fit a 240mm / 360mm AIO in the case.System specs of the budget esports gaming PC that is housed in the pictures with this reviewRyzen 3 3200G (running on the Vega 8 intergrated graphics)Gigabyte A520M DS3H motherboardAdata 240GB SSDToshiba 1TB 7200RPM HDD16GB Adata XPG Hunter DDR4-3200 CL16 RAM (2 x 8GB)TP Link 300 Mbps Wireless cardA Budget 500W 80+ Bronze rated PSU (used over 100 of these that come with a 2 year warranty and never had one fail yet)PlaysCS-GO 1080p medium @ 80 - 100 FPSFortnite 1080p performance mode with epic view distance at a locked 60 FPSValorant 1080p medium settings at 100 - 120 FPSRocket League performance mode 60 FPSShadow of the tomb raider 1080p - don't bother, it's unplayable - but it for esports titles it does the job well for under £300

I wouldn't recommend this for a first build as it's not a regular lay out, but for value you can't beat it.

Having some issues with the front fans: the middle fan is out of sync RGB-wise with the others, making it appear somewhat odd.I didn't consult the user manual, so it's highly likely I made an error during installation.The case exudes high quality. I'd recommend pairing it with a 240mm CPU cooler, as it establishes a balanced intake-outtake airflow with 3 front fans and 1 back. Adding the CPU cooler offers 2 top fans, achieving a 3 in, 3 out configuration.I opted for the Oversteel CPU cooler due to its reasonable price. Installation proved challenging, as I haven't assembled a PC in over a decade.In conclusion, despite a few hiccups, I'm genuinely pleased with my setup. And speaking of the Oversteel cooler, at its price, it felt more like an "OVER STEAL"! Talk about a bargain, right?

I thought this case would be perfect for my build because of all the reviws and people that buy it. It has nice RGB and enough room for bigger graphics cards, and everything worked out but there's a few things.First of all, there is no cutout for a CPU cable, so if your power supply has short cables you might need to get extensionsSecondly, It's very hard to mount a hard drive, so if you plan to build in this case use only a SSDThirdly, It was pretty hard to build in, even for me with experience, ive built pcs in the past.Im happy things worked out tho, the rgb looks great and has multiple colors that you can switch with a button on top of the case, thats probaby the only thing i loved about it

This case is amazing.- beautiful case- front panel has 2x2.0 usb (uses one connector) and 1x3.1 usb- has plenty of space for components and cable management in the back.- good airflow and dust filters.- perfect cutout for power supply, 2.5 ssd, motherboard. I didn't buy a cpu cooler right away, the cutout gives me option to change the cooler without taking it off- sliding side glass

Das Gehäuse ist top und bietet ein sehr guten Luftstrom. Man muss noch zusätzlich Lüfter einbauen. Kein Lüfterhub im Lieferumfang enthalten. Ansonsten ein Top preis leistungs verhältnis. Wer beim Gehäuse nicht auf eine Marke wert legt, den kann ich das nur empfehlen.

Buenas calidad, no te arrepentirás además tiene por si en un futuro quieres poner el cristal con bisagras

Super nice to look at with controlled RGB. It would be nice to have on or two more fans even if it had a higher price tag. Hard with cable management but for the price it is what it is. ( Groot not included loll)