Teexpert Epoxy Resin Crystal Clear: 64oz Kit Fast Curing Heat Resistant for Casting Coating Art DIY Craft Jewelry Wood Table Top Flower Preservation - 2 Part (32oz Resin and 32oz Hardener)

Love it, so easy to work with, minimum bubbles, a long time to work with and clear color.

Mixes easily with pigments and comes out of the mould easily. Only cured overnightso doesn't take long to have a finished product

I needed to build a larger chemical proof bench top recently and needed to cover with epoxy resin. I have used epoxy resin before with good results. This product was easy to mix and apply and the bench top turned out really nice. Good price and good coverage. Will use again if I need another chemical resistant bench top.

I like this resin, easy to use, no odor and no issues with bubbles.

This resin was available on delivery for that same day on both occasions making it my go to when ordering out of all other options. It came double packed with a tight seal under each bottles caps keeping it all intact in case of delivery accidents. Price was lower than most for the amount or volume, & quality was top notch giving it 5/5 ⭐️! Working time , mixability and cure time were all above average in my experiences working with epoxy resin. Low odor, little if any bubbles I recall not having to use very much heat to get rid of bubbles. Perfect coverage and thickness with easy to read instructions for mixing making this is my most favorite resin when it comes to making geodes or my canvas arts or anything to do with epoxy resin by far

This is the first time I've used this brand of Epoxy. We use these for custom coasters that we 3D print bases for, pour acrylic paint in, and then pour epoxy over the top to protect the paint. We've done hundreds of these so far. This is a fairly thin epoxy when pouring, which is great if you need it to spread and fill in small gaps. It was noticeably thinner than the previous 2 part epoxy we were using and the set up was affected by this difference. This epoxy took longer, about 12 hours more than the thicker epoxy to set up until it was hard enough to resist a finger nail. Total cure time was about 36 hours compared to 24 hours on the previous brand. I don't think this is a big deal, but something to consider for your application. Our pours were also very thin, about 2-3 mm in depth so curing would take longer for a deeper pour. The thinner nature also means bubbles more easily came to the surface to be popped with a heat gun. The previous thicker epoxy didn't have any problems but again our pours are very thin and if you are not using a vacuum chamber to pull out the bubbles prior to pouring a thinner epoxy like this might really help avoid bubbles in your pour. Overall I think this is nice epoxy and a decent price. $32 for a half gallon is reasonable, and quite a bit cheaper than the smaller sizes on a per oz basis. Obviously if you need a lot going for a gallon or a bucket is going to be more cost effective. But for smaller crafters a half gallon will last a long time.