eXtremeRate Replacement D-pad R1 L1 R2 L2 Triggers Share Options Face Buttons, Black Full Set Buttons Compatible with ps5 Controller BDM-010 & BDM-020

I went with the full wood detail on my controller, all eXtremeRate gear so you'll see this review on the other parts too. Not a terribly difficult project but it is very time consuming. Be sure to watch every video you can on how to take it apart properly. The main shell pieces are the easiest to deal with. Pop out the piece connected to the sticks first, then split the front and back plates, then you're in. The top two clips on the side near the L1/R1 are the hardest to pop out, but the rest after that is all screws. All the back shell pieces feel real smooth, as well as the buttons. BE WARNED: if you're replacing the touchpad it requires some type of heat gun to melt the glue to peel of the PCB board. I didn't know this going in and had to improvise with a blow dryer and a razor blade to get under it. The touchpad version of the replacement touchpad has two screws, but the newest model of PS5 official controller only has 1 and a notched slot. This is to make sure that the pad, the PCB, and the plastic piece connected have a TIGHT connection. With the two screws you have to make sure they're all the way tight. I don't think I did this correctly and now my pad sits slightly higher than the original and feels very slightly wobbly. I think something similar happened with the Options and Share buttons as they are slightly more recessed than the original. Overall, they all work as they originally did, just the feel is SLIGHTLY off. You'll need some tweezers and a light grip as well for removing the ribbon cables in the internals. There's no instructions in the box, but there's plenty of YouTube vids out there to get you where you need to go. Fun project for the evening, but took me about 3 hours to finish and test afterwards. May go back in later to fix the pad and other buttons, but overall happy with how it came out.

After seeing someone post custom controller kit results on Reddit, I decided I had to freshen up my Day 1 DualSense controllers.I wanted a fresh look, which the eXtremeRate wood trim gives, but also to differentiate the controllers so they no longer looked identical.I got these with my PS5 on release day, so they've been put through some wear and tear, they show as the BDM-010 model according to eXtremeRate's guide.For the button kits, I chose to go matte instead of chrome. My obsession with tea meant that the Matcha Green color was an instant sell, and it looks great paired with either the Coral or the New Hope Gray (which is what I went with).Even with the included tools, I did find getting the controller trim and the casing to separate a bit of a chore. As a result, there's some slight damage to one of the controller's left hand-hold.Once the controllers were open things went smoothly, for the most part. It's worth noting though that you want to pay attention to the silicone backstops for the controller's top buttons. The darker spot should be facing you when you place it back in. The first time I did this, I had it facing the wrong way behind the power button and there was too much pressure, resulting in the controller not powering on. I took it apart again and just flipped the silicone, everything worked perfectly after that.The eXtremeRate kits look great, they give a nice unique touch, and for the price, I have no complaints at all. I would definitely buy these again if I was looking for more.

I bought four sets of buttons. Two black, one purple, and one champagne gold. They are of high quality, fit great, and look fantastic. The only problem I had was with one black set. After replacing the buttons, the L2 and R2 buttons fired continuously. After removing and replacing several times with no improvement, I put the original L2 and R2 buttons back on. The controllers went back to working correctly. Yes, I verified that the ones I ordered and the controller type matched. This wasn't a problem for me because the R2 and L2 buttons are already black. The other sets worked perfectly.

DOES NOT FIT A BDM-020.The alignment prongs on the bumpers are too wide for a BDM-020 PS5 controller. Do NOT order from this company if your goal is to repair a BDM-020.

not a perfect fit so the L1 & R1 bumpers don’t feel as smooth but they’re wonderful if you don’t want to buy the pearl ps5 controller.

I really like these buttons. I love the color and goes so well with my white PS5 remote. My main reason for changing the buttons was due to the fact that my up arrow button was no longer working. My toddler threw it a few times and must've loosened it up. I had a feeling it could be fixed. Sure enough when I switched out the buttons the remote works good as new! changing the buttons is a little time consuming, especially for someone who's never done it before. I wouldn't had been able to replace the buttons without the video on youtube but I don't usually customize my remotes either. So if I can do it, anyone can! I love the look of the remote so much that my next purchase is going to be the matching piece where the black piece is.

I loved the color and these were super easy to replace after watching a video. The only thing that makes me give this a 3 is because in two different packages of these buttons both the R2 buttons were made like the L2 buttons, so it doesn’t fit my controller. Definitely watch out for this as I almost had the buttons rod lodged and took an hour to finally get it out. This part really bummed me outI also noticed the R1 and L1 buttons aren’t made for the newer models of dualsense. The clips are much smaller so these pink ones don’t fit, which isn’t much of a problem as I have both models.

It easy to switch the buttons

I misread the description and thought these were for ps4 controllers however that was my own fault .. I was still able to modify the d-pad so I could use it but unfortunately I cannot use the other buttons. They are great quality and a really pretty color so I highly recommend!

Installation was fairly easy.

Me gustó el tacto aunque es un poco diferente a los originales, los botones son de muy buena calidad

There's not even much to say about this, it doesn't add more functionality to your controller, doesn't make you play any better, this is purely cosmetic. These bundles adding so much more flair to the controller makes it so worth it to me.Most of the buttons in the bundle are fairly easy to install, thanks to the fact that the controller itself is already pretty easy to disassemble. L2 and R2 were easily the hardest part of the installation, maybe some would argue they're not worth replacing. I have an 010 controller, so I had no issues installing the triggers. However, it does require you to disassemble the entire trigger mechanism just to replace the button. I was really nervous doing it, but they actually offer multiple video guides that show you how to replace everything.I would recommend this to anyone looking to make their controller feel more "theirs". This is easily the most special controller I own.