1157 LED Reverse Light Bulbs, Super Bright 6500K White 300% Brightness 2600Lm, OUSHI BAY15D P21/5W 2357 7528 LED Bulb with Projector Replacement for Backup Tail Brake Turn Signal Lights, Pack of 2

I have to confess to be a drooling fan of LED bulbs in general and in particular vehicle LED's. I just adore the way they turn off and on, there is no delay, no dimming whilst its changing modes - its either on or its off, nothing in between and so much more noticeable for it enhancing the extra brightness.I haven't seen, and I can't find this OUSHI BAY brand anywhere except on Amazon, so they may well be an Amazon exclusive, if so - well done Amazon for getting such well-made and performing lights at what seems to be a very good price.These two packs of bulbs are perfect, after all who wants one? and they seem to last for a very long time.Some of these bulbs are not compatible with every vehicle, the turn signal especially may well give the rapid flashing error, and cause your vehicle to report a bulb out. This is not necessarily the bulb, the bulbs in general require less power than a standard unit and the system thinks it’s not using enough power to produce light and reports it as an error. In most cases this can be overcome by adding resistance or changing the flasher unit for an LED compatible one. I think it’s worth the effort to gain so much brighter and life from the bulbs. Care needs to be taken in the choice of replacement. All the information is included on the web page to make sure your choice is the right one. But rest assured, changing to LED even if extra work is involved is the right thing to do. I firmly believe better lights equal better safety and I would urge everyone to change to these much more modern alternatives to the standard lights fitted to vehicles...These OUSHI BAY LED replacement packs have to have five stars for build quality, price and fitting choices.JCIf you found this review helpful, please consider clicking the box below.

Very fast deliveryGood stuff for the moneyBad point is no difference between normal light and brake stageOnly to use on car with separate brake light and night stage circuit

These 1157 light bulbs from OUSHI comes in 2 pack and has an amber yellow light. It was designed with high power 36 pieces 4014 and 3 pieces 3030 chipsets.The ultra-bright light from these LED bulbs is also an energy-saving solution. Since this is an LED, it only runs at 12 to 24v DC and 11W (5.5W per bulb). It also has 2600LM (1300LM per bulb) and is 300 per cent brighter than halogen bulbs. They have a lifespan of 50,000 hours and have a solid heat-dissipating aluminium body. Other than this, the signal lights have a secured constant current IC driver that can withstand repeated motion vibrations.Also included with this signal light bulbs are a powerful 360-degree high luminous irradiation. It delivers a mega bright glare, with a minimal blind spot. This provides maximum visibility during the night and fewer glares at drivers.With its compact design, the bulb is easy to install, just simply plug and play. It's nearly 98 per cent CanBus error-free too, although some of the new models might need to install a load resistor to prevent hyper flash. It also features an IP65 waterproof sealing which makes it dust and cold proof.This is an excellent replacement signal light for cars. It has an impressive amount of light despite using less current than halogen bulbs. It's more efficient to use and worth the value. I can also fit these lights on to my bike and it works well while I bike at night.Overall, I like these signal lights, they are a good replacement bulb, cost-efficient, and very energy friendly.

These fittings have two contact fittings, our turning signals only use one these are more like a stop and tail lamp they should show the bottom fittings when advertising. Diapointed.

Stuck this in my friend's car and it worked like a charm! Dismantling the boot compartment is pretty simple and you can simply follow a YouTube tutorial.Take the old bulb out, stick the new one in, then turn your ignition on and see if the bulbs work. If they don't work, you'll need to flip them round and put them in the other way because the polarity was wrong. I personally found that neither way worked, so I had to actually lift up 2 of the terminals on the bulbs and move them to the other side, worked like a treat after that!The bulbs are SUPER bright and really let's anyone behind you know that you're reversing.Overall, I can't complain at all and think these are very reasonably priced for what they are. Would recommend!

I have decided to try these LED brake lights after having to replace 3 brake lights in 2 years. The old ones were incandescent bulbs and didn't last long at all.These LED lights, fitted in the same way as the old incandescent bulbs, are about as tall as the old ones but slightly thinner and overall easy to replace.The output light also looks slightly brighter but this is not the reason why I decided to get LED lights but because these are supposed to last longer so I won't have to replace them anytime soon.There is no flickering and the light looks good, happy with them.

These led brake light bulbs is easy to install, nice quality, does the job.

These LED bulbs work beautifully. They are definitely brighter than the original turn signal bulbs I had before on my car, and I am very pleased with the quality. They are well-made, super sturdy, no noise noticed or interference with the car radio, uniform glow, and they are still holding up well after a month now! Recommended.