Wireless Bluetooth Home Audio Amplifier - 100W 5.1 Channel Home Theater Receiver, Surround Sound w/ HI Def In and Out, RCA In, Subwoofer Out, LED Control Center, 12V Adapter - PFA560BT

Been using to drive vintage lips h forte loudspeakers with built in passive subs. This unit can’t drive these speakers very loud but it’s good enough for living room. Had trouble getting pared with Samsung smart tv at first and iPhone but once originally paired can connect without issue. Good for the small investment. Remote lacks quality. Buttons depress not well but not a deal breaker.

Pyle PFA540BT.5 Technical Evaluation I couldn't find much technical information about this unit online so decided to order one and discover for myself what it actually does. After playing with it for a couple of hours, here is what I learned. 1. It advertises itself as a stereo (not surround) processor. Like most devices that can handle HDMI input, the PFA540BT uses Extended Display Identification Data (EDID) to tell other devices about its capabilities. True 5.1 audio receivers provide a list of 5.1 formats that they can process. This unit does not. The practical consequence is that your streaming device will politely find ways to send stereo content rather than surround-sound content. It's also a big clue that it can't process audio encoded in any of the common 5.1 formats. 2. It can send audio to six channels The PFA540BT provides connections for five speakers (FL, FR, FC, SL, SR) plus an RCA connection for a subwoofer. I was able to get intelligible audio out of all six channels. In that sense, it's a 5.1 surround-sound amplifier. At first glance, this seems inconsistent with finding #1 above. That's where it gets interesting. Read on. 3. It has a "surround" toggle Some reviewers on Amazon noted that the earlier model had a "surround" button that appeared to work backwards from what they expected, but that it had been "fixed" for this upgraded model. After some experimentation, I think I understand what they meant. To make sense of what this button does, it's important to remember that this amplifier can't process surround sound input. It works with only two input channels: front left (FL) and front right (FR). When the button is in the "off" position, it acts just like an ordinary stereo receiver. It plays the FL input through the FL output and the FR input through the FR output. It also merges both stereo input channels into one mono channel and plays it through the subwoofer output. That's it. The other three output channels (FC, SL, SR) remain silent. FL -> FL FR -> FR FL + FR -> SW When the surround button is in the "on" position, the receiver does exactly what it does with the button in the "off" position, but then it also uses the remaining three channels. My unit introduced a significant amount of noise to the surround channels (SL, SR) so I couldn't be completely sure, but here's what I think I heard. The surround channels duplicated the front channels. The center channel (FC) duplicated the subwoofer channel (SW). In table form: FL -> FL FR -> FR FL + FR -> SW FL -> SL FR -> SR FL + FR -> FC 4. It truly can't process Dolby (AC3), DTS, or plain AAC surround sound Just for fun, I used an EDID generator to disguise the PFA540BT.5 as a true surround-sound receiver. Then I force-fed it 5.1 surround-sound content in three of the most common formats. It produced nothing but noise. Call that truth in advertising. THE BOTTOM LINE I tried to imagine a use case where the PFA540BT.5 would be an ideal choice. It's small and runs on twelve volts, which happens to match common automotive electrical systems. It's also cheap. As other reviewers have noted, it's too quiet to be useful in a moving vehicle but it could play a role in a mobile theater system -- if you're OK with five channel stereo rather than true surround sound. On the other hand, you could produce the same result but with more power by splitting your stereo source between two stereo amps, one of which might be built into your vehicle. I suppose that means I don't understand why anyone would want to buy this thing.

Update#2: Amp is still working well, but the same cannot be said about the remote for it, or at least the remote functions. Pyle has been good and trying to send new remotes, but non of them are able to control the unit. This is an issue since the unit is mounted on the ceiling and the only way to get to it is on a ladder. I now have 4 remotes that do nothing. I tried to explain to Pyle that I believe the issue is something other than the remote, and they just said that they would close my ticket. Unfortunately, there is no way to control the unit now without getting on a ladder to adjust things, which isn't feasible. Amp looks to be well built. I will be installing it in a training classroom with a five speaker set up to replace an outdated amp and speakers that are currently there. After reading reviews, this product looks to fit my needs, plus the price was great. Hoping that it will work well. Will update after installed. Update: Amp paired with 5 Acoustic Audio R191 in ceiling speakers and sounds great. Sound quality is much improved over the failed system that was previously installed many years ago. One improvement that could be made is the blue led display. The amp is mounted on the ceiling and it is very difficult to read from a distance.

It did not connect my passive speakers the way I believed it would.

Great little amplifier that was easy to set up....Bluetooth has been easy to connect. Added a subwoofer and used dedicated Sub Out. 4 stars due to remote being a little sensitive. You have to have direct aim at the unit for remote to work.

DID A 5.1 SYSTEM IN MY LARGE BATHROOM WITH 5 CEILING SPEAKERS. 10 INCH SUB UNDER MY 2 PERSON JACCUZZI BATH TUB. 100 WATT AMP FOR SUB. SOUNDS FANTASTIC.

Small compact unit with exactly what I needed to replace my broken old 5 channel surround sound amplifier. I don’t have a huge need for surround sound, but I use this for my tv in the family room. Works great. Has a separate subwoofer RCA outlet.

My plan was to install in my Motorhome. 1st, it states that it is 12 volt. It is not. Both the unit and adapter says that it is 16 volt. 2nd. The radio antenna input is for a PAL (Europe) TV antenna. 3rd, There is no on / off switch. If you install inline an on / off switch you lose all your preset for the FM radio. 4th, depressing the "Stand By" switch only mutes the main speakers not the subwoofer output. (Active Subwoofer required). 5th Customer Service is lacking. Here is my response to their "How was your customer Service experience. - I provided you with a video of the issue. That putting the unit in Standby does not cutoff the audio supplied to the sub woofer. Meaning other than turning the subwoofer to "0" volume. Placing the unit in "Standby" does not place the unit in a Standby mode, only silences the five main speaker speakers. Since what ever the function selected was doing, in standby mode it continues to do that function only silences the main speakers and continues to consume the same amount of power. Standby is only a lease featured of Mute. I asked if this is the way that it is the way it is supposed to work. Is this the way it should work? There is no On an Off switch. Additionally I asked what the AMP draw was when the unit was on and what the AMP draw should be in standby. You would think that putting the unit in Standby, that the unit would require less AMPS. Here is the answer received to the above request for the information. Hello XXXXX, I apologize for the late response It is 10 amps Best regards, Txxxxxx Oxxxxx Technical Advisor

Jag är ingen audionörd men den gör jobbet. Jag har 5 högtalare och en subwoofer i källaren och jag har nu äntligen ljud. Högtalarna har suttit på plats i över 1.5 år och bara väntat på att få spela musik. Lätt att installera och få allt att fungera. Hade en gammal förstärkare som inte hade bt mottagare.

Too be honest, I wasn't expecting much from this but how wrong I was, it sounds great, packs a punch. For watching tv ,tv picture is great and smooth, no interference, it isn't Dolby surround but sounds good enough . For music, its got a punch. I'm using a galaxy tab a8 with Spotify and poweramp global equaliser ( which is a must ) It has clear top ends, no distortion, a hefty bass (with sub ), mids a crisp but not in your face. It's simple to use. I like the fact that you can alter the volumes for front, back, sub and center separately, I've got 4 mordant short 30w speakers, a powered sub, and 2 Philips tv speakers that I wired together to make a center speaker, I got it to replace a marantz av receiver which has died and I can't afford to replace, so I thought I'd take a chance on this, it's obviously not as good the marantz but for the price, I can not complain, the one thing it beats the marantz in hands down is, it works ! There's only one thing I don't like and thats, not all the controls are on the main unit , some are only on the remote, which is ok unless the remote breaks or you accidentally throw it in the bin (which has happened ) this isn't just Pyle, its like that with most things now. Overall, I'm Very happy with my purchase. If anything changes, I will update the review 👍👍🏻👍🏼👍🏽👍🏾👍🏿😁

Bueno, ha llegado y hasta dentro de un tiempo no lo pondré en marcha ya que se trata de un regalo para navidades. Todo indica que funcionara bien ya que se ajusta totalmente a la descripcion. Muy satisfecho.

Compacte toestel met veel mogelijkheden voor en schappelijke prijs.

seems to be very good value and worked well except wasn't compatible with my satellite receivers HDMI. Worked with other HDMI inputs. Service from the company was excellent.