🔧 Power Up Your Ride with Ease!
The Tetra-Teknica MotoBasics Series RHS-01 is a 12V ring terminal harness designed for convenience and versatility. Featuring a 2-pin quick disconnect plug, 2 feet of 16 gauge copper wire, and a 10A fuse, this harness is perfect for connecting to maintenance battery chargers and compatible with heated suits for motorcycles and snowmobiles. Its weatherproof dust cover ensures durability in various conditions.
R**P
Works perfectly with my chargers.
Very high quality connectors.
C**E
Good quality for outdoor use.
Using for trickle charging motorcycle batteries with standard connection without removing batts one opening up compartment. Heavy gauge wiring stands up to road grit. Recommended!
A**D
Added convenience
The media could not be loaded. I purchased this to complete a simpler on-shore charging system for my boat, the kit will work for any situation where you need to periodically charge or maintain 12volt batteries.This were needed to simplify charging my boat on shore. I was tired of crawling under the dash to attach alligator clips in order to charge the batteries. These ring terminals were perfect. They fit just right onto the battery posts, and the SAE connectors make it easy to connect either my solar panel or a land powered charger.The charging solution I am using this with includes two different charging sources, a Suaoki 60Watt solar and a Noco Genius G3500 Smart Charger. Both are great and provide a similar amount of power to the batteries. The solar charger does not work so well at night though, and the wall charger does not work when out camping on the boat.Suaoki 60Watt Solarhttp://amzn.to/2w1ylpKNoco Genius G3500http://amzn.to/2gan697Using the Suaoki solar charger requires the using of a solar charge controller for safety. The Suaoki can be directly connected to the battery, but then the voltage must be monitored as it can overcharge your batteries and lead to premature failure or worse. I am using the Instapark PWM charge controller for this task and it is a perfect match to the system.http://amzn.to/2xg7pAWThe NOCO Genius uses properietary connectors and while it comes with a few different options, none of them made it compatible with my requirements. I ordered the NOCO to SAE adapter and now it connects to a standard SAE plug and works well, interchangably with the Solar charger.http://amzn.to/2wrOxl0In order to add flexibility in placing the solar panel or connecting the NOCO charger, I added an SAE extension. Essentially this is a 12V extension cord. Any SAE to SAE cable will work provided it has sufficient gauge(AWG). For a 15ft length this should be at least 12AWG with 10AWG or even 8AWG being better. For a 5ft length 16AWG or 14AWG will be acceptable, of course 12,10 or 8 still better. Anything smaller less than those maxiums will degrade the charging capacity as it will cause an significant voltage drop. Here are a couple alternatives that look good.Kuncan 12ft SAE to SAEhttp://amzn.to/2iuIzduTetra-Teknica MotoBasic 10AWG 3 Feet, 2 per Packhttp://amzn.to/2g7VT6SI used two ring terminal to SAE adapters, one for each battery, as the aligator clamps were problematic and not particularly reliable. The aligator clamps meant that I had to climb into the compartment where the batteries are stored in the boat and almost always insured a good bump on the head. Sometimes I would come back the next morning to find one had fallen off. Using ring terminals insures a secure connection to the battery and allows me to quickly connect/disconnect without bumping my head. I used the Tetra-Teknica MotoBasics 16 gauge 2 feet 10A fused 2 pack for my solution.http://amzn.to/2w89HlTIn order to charge the two batteries in parallel, I needed to add an SAE Y adapter. The OptiMate Y-splitter worked nicely. I disconnect it when not charging as I do not want power accidentally pulled accross this connection if the boat is using a single battery. I am looking for a solution, a diode that will allow me to keep this connected permanently without that risk.http://amzn.to/2w1wjG0The system is working well and keeping my batteries topped off between outings without a problem.
S**E
Heavy duty and good quality, but not very flexible
I used these to wire a connection to an older Jeep's battery, so I could easily hook a trickle charger up to it as needed. I picked this one because it has an inline fuse, has a good length to it and comes in a 2 pack. I am very happy with the quality and it has worked well for my application. The only thing I don't like is it's very stiff compared to similar ones I got from Shumaker and Battery Tender.Pros:- Quality- Length- Inline fuse- 2 PackCons:- Stiff
R**M
Nice Quality and Included a Fuse
Good price and very nice quality. The wire appears to be actual copper , not copper coated aluminum. Thanks Amazon!
W**O
Quick and easy to install.
Easy to hook up stereo and power up.
H**Y
Perfect for my motorcycles
I bought these to add onto my motorcycles for easy charging and battery maintenance. They work perfectly.
H**E
Just what I was looking for.
We needed an extension to connect our sprayer to our zero turn. This cable was just what we needed. Great price and good quality.
M**S
Good Quality
After reading some of the reviews of this item I was leary about purchasing it, but for the cost I figured I'd give it a go. The wires are very flexible, I didn't find them brittle as described by others. I connected one set to my battery, routed it to come up at the seat and tank for my heated vest. Works great.
M**N
Motorcycle battery maintenance made easier
Good price and nice product.
S**.
Good price
Works good
B**E
Easy to use.
Easy to use.
M**3
Good quality!
Bang for your Buck! This can't be beat! Not cheap junk!
Trustpilot
1 week ago
1 week ago