Deliver to Cyprus
IFor best experience Get the App
🏍️ Grip It and Rip It: Elevate Your Ride!
The INNOGLOW Motorcycle Hand Grips are engineered for performance and safety, featuring a durable aluminum and rubber construction that is waterproof and rust-proof. Designed for easy installation and enhanced grip, these grips are perfect for Harley Davidson enthusiasts looking to upgrade their ride.
Manufacturer | INNOGLOW® |
Brand | INNOGLOW |
Item Weight | 14.4 ounces |
Package Dimensions | 8.19 x 3.7 x 2.13 inches |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | INN-87507958 |
M**O
comfy
easy to install, grips are very comfortable
R**.
Excellent budget-friendly grips
Easy to install, looks great, rubber inserts are a little softer than some other brands.Inside bore of the rubber inserts is just a hair on the large side, will definitely NEED grip glue for installation, as I can pull the grip off the bars with minimal effort.Overall, excellent grips on a budget!
D**I
Does NOT fit.
It fits fine over the 1 inch handlebar however the turn signal clutch housing will not bolt down over the end of the grip. The outside diameter is too large for factory turn signal bracket. I have a 2007 Dyna Wide Glide. Factory bars. It advertised it would fit. It did not. I tried grinding it down to reduce the overall outside diameter until it looked so ridiculous I gave up and threw it in the trash. Waste of time, waste of money . Did I mention a big waste of time? I have it one star only because it looked cool on my bike for like 10 seconds.
E**R
Surprisingly comfortable, fit wasn't excellent out of the box...
I bought these because I needed something cheap, and better than my old grips that had chrome peeling off them, very irritating when riding. I figured these would be made to a price, and I'm sure they are, but I didn't expect them to be as nice as they actually are. They look nice, and the rubber grips on them are surprisingly soft and comfortable. They were pretty easy to install. The left grip slid right into place without any glue or anything, and is sticky enough to stay put. A bit of grip glue (or hairspray if you're cheap and resourceful) would likely make it slide on even easier then stick it in place even better. I haven't found the need thus far though. The throttle side was a little more tricky. The throttle tube is integrated into the grip, so you'll need to disengage the cables from your old tube, then install the new tube/grip and attach the cables. The problem is the end of the grip that fits inside the throttle/switch housing and attaches to the cables is a bit larger than my old grips and the stock throttle tube. Only slightly, but enough to drag and prevent the throttle from returning to idle on it's own. I had to sand/file away some material to get a good clean fit without any friction. I also needed to enlarge the holes for the brass ferrules on the ends of the cables. Once everything was fitted nicely, they work great! As long as they don't deteriorate too quickly, I'd recommend them for the price. I half expect the rubber to break down quicker than some other grips, I mean, they had to cut corners somewhere to get the price this low right? lol Time will tell!
S**W
Satisfied
Received my product on time and exactly what I ordered.
R**R
Look great, But construction is lacking
The item looks great, However on the 1st ride the outer portion Separated from the inner sleeve while riding. Left me unable to accelerate while going down the highway. Found that not enough adhesive is used between the inner sleeve and the outer housing.
B**H
Wow! Just Wow!
Put these on my 2001 883 Sportster Custom and wow, what a difference they made in my ride. For this price, these are great grips. Amazing actually. They are well made, the rubber gel padding is not just glued on, but appear to be a solid piece under the metal cutout. Only one small issue I had was specific to my Sporty, is that the cable throttle control area of the grips are larger than my stock grips, and it is a tight fit under the cover. The cable throttle control area is so tight inside the throttle control cover that I have to manually push the throttle forward now (it won't return on it's own, and no it's not the cable adjustment, it's the size of the grip cable throttle control). This may not be an issue on other bikes, and honestly it sorta works as a constant cruise control (lol). Worth every penny. Ridiculously affordable. Only had them for a week, so can't say how well they will stand up to the test of time. BUT definitely recommend.
C**K
Los Recomiendo
Los recomiendo
G**E
the rubber rolls inside when installing on handle bar
POOR QUALITY, I do not recommend it to any one unless you want to waist your money!! they went straight to the trash!
J**F
Bon !!
Beau look instalation facile est parfaite
D**T
Avec quel modèle de moto trop peu de renseignements
Jsi acheté ce modèle mais il n'était pas compatible avec mon modèle de moto même si j'ai demander à la compagnie si c'était compatible
C**N
Looking good
I am not a big fan of these because I find them too big in my hands and don’t feel that I have has good of control of my bike,but they look good,going to order something a little smaller
M**R
Make sure the throttle side releases properly.
Love the feel. The throttle side was a little tighter and the left side we had to put tape on to get it to fit better. Other than that we love them.
Trustpilot
1 week ago
1 month ago