Sanliang Torque Screwdriver Wrench Driver Bits Set 10-70 Inch Pounds lbs for Maintenance,Tools, Bike Repairing and Mounting. (10-70 in-lbs)

Works great

I've used torque tools before, and just needed a cheap screwdriver for some PC work. Overall I'd recommend it for someone who just needs a general torque and repeatable results, but not for fine tuned work or meeting important specs. CONS: - It's nowhere near accurate. Versus an expensive torque screwdriver, it's clear that the numbers on this are only a suggestion. Close enough for work around the house or on a car, but not if you want to pass inspection on breaker lug tension in a panel. - Setting it, while mechanically isn't complicated, the adjustment numbers in the bottom are useless, and don't reflect anything. This could give an uneducated user a false sense of what value they're setting to. - The bits are junk. Chrome plated, cheap made, and obviously uneven. I'm sure they'll work for small jobs, but anything that needs a tight fit or higher torque is gonna see these breaking for sure. PROS: - Very cheap. It's a torque screwdriver, and it's $30 as of this time. Even a garbage Craftsman is going to run $80 for the same tool, with the same mechanism, and only very slightly better quality. - Repeatable. Like I said, I got this for PC work. I need to make sure every fan screw is at a specific torque, every motherboard standoff is the same, and most importantly, that my CPU cooler is exactly the same on all 4 corners. This does that perfectly. Again, it's not to an exact spec of like 33.7 in/lbs, but I can be sure that every screw is exactly like it's mates. - The Case. The fact this thing is so cheap and actually comes with a case is great. 12 bit slots means I'll be able to grab some better bits and store them with it so I know I'll always have what I need.

This torque wrench has held up well to reasonably hard use, and gives repeatable precise torque. It has an excellent range of torque settings, and comes neatly cased with a set of hex socket bits. It is also compatible with the hex socket bits from all my other wrench sets, which I found to be very useful. The magnetic retention for the socket bits is strong, and transfers magnetism to the bits, which is useful for holding / aligning screws against the bits for precise installation. To set the torque, you just pull the end cap and turn it. There are regular detents to enable intermediate settings in single inch-pound increments. Initially, I was skeptical on how much leverage the fat, “flashlight” handle / grip would provide compared to a T-bar. However, in use I have found the fat handle to be very comfortable and effective, and giving excellent control. The low cost of this tool is remarkable for the quality and performance it delivers.

Haven’t used it much.

Works great for my needs. I would purchase again.

Works ok. The description and pictures (and thus the summary) get the units wrong several times. Inches and pounds are multiplied to give torque, not divided, which would be inches/pounds (inches per pound). The correct term is “inch pounds” (pound inches is also different [long story], it must be inch pounds). The description also says “one inch increments” which is wrong. It should be “one inch pound increments”. Whoever wrote this did not know how torque works and that reduces impression of competence and quality.

The quality is what you can expect for a budget tool. There were no missing parts. Everything came neatly packaged. The bit selection is limited as far as what comes with the tool, but obviously you can get comprehensive packs separately. The carrying case is nice and keeps your most commonly used ones readily available if you wanna swap them out and load it with what you really need on a regular basis, as far as storage is concerned, the case is slightly oversized, but it’s worth it for it. It’s overall convenience. I would buy it again for sure.

First up are the CON's...take the bad news first because that just makes the good news sound gooder. 1. this is not a precision instrument. 2. the torque settings are merely "recommendations". 3. i don't know how long this thing will last. now with those out of the way, here are the PRO's... 1. the price. i cannot afford $300 to $1200 for a precision torque screwdriver, heck i can't even afford a Wheeler torque driver, but i needed a torque driver and SanLiang had this on sale with a coupon so i jumped on it. 2. while the settings are off for the low, 2>14 in.lbs and the high 40>70 in.lbs, it really does shine in the 15 to 35 in.lbs which is in the ballpark of needs for my uses. 3. the product and packaging is really well done. it has become the center-piece for my travel workset and so far it has done paid for itself and then some. would i recommend this item? depends. if you need it for a quick, fast, in a hurry fix for something like say a bicycle or an heirloom Singer sewing machine, then yes, it will fit the need and then some. if you're wanting precision values for F1 racing or aviation mechanics...dude are you serious??? i own a torque driver specifically designed for aircraft structural repair and gets re-calibrated after every 6 months of use. cost was $2599.99. that thing sits in my safe. but here is some FYI. alot of people don't know how a torque driver works. they think that it's through mere friction and the red line is the set line. they're partially right and as my instructors would always say; "being partially right just means you're mostly wrong." a torque driver uses a calibrated compression spring and most torque driver have a "BASE SET SETTING", the lowest setting. this one comes with a base set setting of 2, so if i rotate the adjustment knob to 1, i'm not at 1 in.lbs., i'm at 13 in.lbs. so if i set the red line to the 10 on the scale and have a 0 in the small adjustment window, i've got an in.lbs value of 22. which is not 10 but the tip top of the white gauge hits 20. so you have to know how to read the setting indicator properly and know your tools individually.

Works as advertised and seems to be a great value.

Very happy with this purchase. The torque is easy to set and works very smoothly. Great value for the price

Unique item,very accurate

Pretty happy with this, it does the job at good price, so I am glad I got it to torque my rifle scope rings.

Easy to use and adjust.