ErGear Single Monitor Mount for 13 to 40 inches Ultrawide Screens, Holds 26.5lbs, Gas Springs Single Monitor Arm, Single Monitor Stand with Swivel, Tilt, Rotation for Home and Office, VESA 75/100mm

So I purchased two of these after I purchased the first one and received it I mainly ordered a second.OK let’s get a few things out-of-the-way. There are a ton of monitor arms out there. What sets this one apart first off it actually works great. A lot of cheaper arms will not hold the weight they advertise. I love the fact that this has a built-in USB 3.0 connection. This is extremely handy for hooking up an external hard drive, or hooking up a dongle for a mouse or keyboard, or for just hooking up a flash drive, or even charging a phone. It is very well hidden underneath the side of the stand and once it is bolted and installed, N is extremely secure. Next to the bill quality of the arm is great. It has a nice set screws that allow you to set the tension of the swivels and to set the tension of the tilt and rotate function. The gas arm is adjustable for different weights of monitors, which I will speak about below. The cable routing mechanism is wonderful and definitely makes the install looks super clean. The attachment points are very secure and actually have adjustments so this could be used on a thin table as well as a very thick countertop style table. I’m using it on a almost 2 inch thick butcher block countertop, and I moved it down to the second mounting location and works absolutely great and fits wonderfully. It has nice feet on the bottom so that it doesn’t try to slide around and if you desire you can permanently install it by drilling a hole and using the supplied hardware to build it to your table.Now to the meat and potatoes of this on my two separate arms, I am running a 32 inch TV and a 32 inch gaming monitor. On the first arm is a Samsung 32 inch television it’s not super heavy, but was able to adjust the arm to work perfectly for that weight. On the second arm I am running a LG 32 inch gaming monitor Which is relatively heavy. It holds this weight no problem and is super secure. This monitor was quite expensive and I definitely wanted a good arm to keep it secure and I couldn’t be happier.The mount works extremely well especially on the gaming monitor. I am using an adapter on my 32 inch TV to bring it down to the standard 100 X 100 mount. It does push it out from the wall a little bit but not much and is perfectly acceptable, and works wonderfully.

Bought this for my drawing tablet (Huion Kamvas Pro 22) which weighs around 4.5kg/10lbs. Needed something to allow me to put it over my keyboard while drawing, and sturdy enough to hold the weight of the tablet and not shake while resting my hand on it.PROS:- Good range of motion, tilt works great though it can be a little bit of a pain to keep it straight and not rotated ever so slightly when I'm switching its position all the time.- Was prepared to use the included grommet installation, but it seems the C-clamp is sturdy enough for where I put it. Can handle the weight of my arm on the screen with no issues. It does shake ever so slightly but it's negligible.- Cable management is a big plus. I ended up using the USB port at the base as an extension for the cable that runs out of the tablet so it could reach my laptop.- Back plate fits the tablet with no issues, for other people considering this arm for their Huion devices.- Assembly was fine with just one person. The instructions said to leave installing the monitor for last, but I did it from the start and I think it turned out being more manageable that way. If you also choose to do it this way, make sure you get the tension sorted out before you attach it to the desk.CONS:- For some reason or another, absolutely no instructions were included in my package. I managed to find the manual posted online so I was able to assemble it with no issues, but it would have been nice to not have to dig around for them.- No issues with the product itself, everything seems to be in order. Will update this review in a few months to see how it holds up over time.Edit (September 29 2022): After a few months of regular use, everything continues to work perfectly fine. My review remains unchanged.The only additional thing I would have to say is: If you plan on swiveling this thing around very often as I do, be very careful that the cables attached at the base of the screen aren't under high tension. Give them enough slack that they won't pinch at the ends; I had to replace one of my cables because of this error. Seems obvious in hindsight, but I figured I should mention this anyway since it might not be something you would be thinking about when you set it up.

This monitor arm mount is a great purchase for the price! I bought this to hold my 38" ultrawide monitor, which weighs about 18lbs. The mount was super easy to install without too many screws and bolts to place (unlike some of the previous mounts I have owned). The mount has options for a C-clamp mount, as well as bolted mount, with height adjustments for the C -clamp which was great. It handles the monitor great, and the arm moves and functions perfectly with this large of a screen on it. It also has a USB wire which you can place inside of the mount base, which acts like a USB extender to avoid having to place any external USB plug ins into the back of the monitor or fumble with your computer to plug it in. Definitely would recommend this mount!

The price was right and it was an easy install. Overall it was very sturdy and easy to adjust. It has a more professional look which brings your desk a nice aesthetic level.Overall I’ve had no problems with this desk mount and I’ve used it on multiple monitors. Just be aware, the lighter the monitor the harder it is to keep it to stay at its adjustments but as long as you use the provided tool, it’ll be all good.

Bought this mount to use with a LG 38" ultrawide (model 38WR85QC) and it's perfect. Installation was super easy, and I ran into absolutely no issues. Everything fit together exactly as expected. Even the tension on the gas spring was perfect right out of the box for this monitor, the only adjustment I needed to make was to tighten up the vertical tilt. I was almost going to pull the trigger on a more expensive mount but thankfully there was no need.