PrimoChill PrimoFlex LRT Custom Watercooling Flexible Tubing -1/2in.ID x 3/4in.OD, 10 feet Bundled with System Prep and Coolant, Made with Premium Materials, Proudly Made in The USA - Elegant White

Unless you have some 60+ watt blacklight bulbs in your case, this tubing will "glow" dimly and unevenly. No amount of UV LED strips will provide satisfactory results.It's also expectedly difficult to bend - especially short segments - and anything smaller than 8 inches in length will have a flat spot at the bend and depending on the degree could put enough pressure at the fittings to come loose.Soaking lengths of tubing in hot water or using a heat gun does not work to set bends. This tubing likes its default shape of droopiness and will not change itself to suit you no matter what you try.

Quality on flex

Much love for the quality of product and packaging, and for including system prep. Be careful though, I am a big guy with lots of hand strength (insert inappropriate jokes here please) and it was almost impossible for me to tighten my compression fittings down with how thick the walls are. Another reviewer stated a similar experience. Overall great value for length provided, would be nice to see this @ a $29.99 price point. I will add photos later today!

Very nice extra thick tubing. Handles bends quite well too. No kinks. Included inhibitor and pre-cleaner was an added bonus. Box is sturdy for storing extra tubing too.

Best on the market

About the only dislike is that it is a bit stiff. But that's ok, I get that it's a big thick tube; if I want more flexible I would go thinner to start. Their non-LRT tube is a bit more flexible but clouded more quickly so I use this stuff. I only use water with an anti corrosive, and use LED lights to give it an almost 'liquid crystal' look. I end up swapping it out about every 1.5 years. The rig is benched so hard tubing isn't the best choice, and frankly looks aren't the most important thing. In 6 years with Primochill tubes, no leaks (XSPC compression fittings).

The only thing I don't like about clear hoses is they show off residue but I replace these things once a year.When I first built my loop I had used Tygon tubing but I caught word of Primochill and tried these a year ago. After the 1 year replacement, the previous Primochill hoses still felt new. They flex well as long as you give yourself enough slack to avoid kinks.If you do have a very large case, and I mean the size of a Corsair Obsidian 900d or Cosmos II, and you're cooling more than just your CPU, then you're going to need more than 10'. It's probably for the best to measure out how much you need before buying a pack.

Overall the product is good quality, but there is a significant issue with the writing or labeling that comes on it. I'm too lazy to attach photos, but the pipe has seemingly random red dots almost etched into the outside of the tubing every 6-12inches. This can be one or two dots up to 10 or so spanning 6 inches at the maximum length. If you have a display, they are very noticeable. I would have returned this product but I cut the tubing before examining the whole length for defects such as these. I tried to get the marks out but they are physically etched into the plastic, no cleanser is going to remove them.The product itself is good quality, flexible but rigid enough to not kink. It fitted my Bitspower compression fittings appropriately and no issue with leaks thus far. Just wish the tubing had come without any marks on it, made it very difficult to cut pieces that were not tainted especially with a window on my PC.

Tuyaux de très bonne qualité et facile à installé.