Feiteplus 7/8" Motorcycle Universal RCS19 CNC Hydraulic Brake Clutch Master Cylinder Reservoir Lever Upper Pump Cable Adjustable Handbrake

Product came packed very well in foam and the box was sturdy and wonderfully packaged. Minor assembly was required and adjustment of the reservoirs can be tricky if you have a windscreen like me. As for the actual master cylinders themselves, they're definitely clones of Brembo 19 RCS brakes and the only thing they lack is the adjustment for the stroke. So you're stuck at the18mm stroke. Other than that, they've performed phenomenally! My front brakes are as good as they've ever been and the only complaints I have about the clutch are due to the fact that my bike wasn't designed for an oversized clutch master cylinder. Very easy to bleed and very easy to install

These are around 10x cheaper than the real thing. For the most part, aside from some missing Brembo branding, they are indistinguishable from the original Italian manufactured units. I needed a quick replacement for my failing clutch cylinder and was happy to take the risk on this cheap upgrade. For what it's worth, they do feel better than my dying master cylinder. But some small things are noticeably cheap, such as the adjustment knobs not having the proper click adjustment, so there is some concern with these coming out of adjustment over time. If that happens I will update this review. Also the fluid reservoirs are not a direct copy of the Brembos, but in my opinion they actually look better. Furthermore, I foolishly did not realize that these do not have any mirror mounts like my previous master cylinders did, though Brembo does make an adapter for these. Will these spontaneously fail as I'm doing 80mph on the freeway? Only time will tell

dangerous design to trust. the hoses to the reservoirs are retained by absolutely nothing and could be pulled out very easily

I used these to push dual 6 piston brakes. I was absolutely blown away after always running the standard chinese $20 master cylinder. insanely easy to bleed, lots of adjustment, pushes a super heavy duty 60lb clutch and stop perfectly so far @120. Obviously if you have a 10-30k bike probably just stick with oem or factory direct Cons: no instructions Almost lost the brackets definetly not Cnc idk if the bore is actually 19mm

Nice looking levers and appear well made for the most part but there are some goofy issues. One hole on one of the fluid reservoir mounts was missing threads. The same hole on the identical mount for the other side was threaded. The brake light micro switches were not working. I took one apart and found that one of the leads wasn't soldered on, not broken, but never soldered to begin with! Also, there is no way to mount the reservoirs symmetrically on the bars because they are not mirrored and have a limited range of rotation on the mounts. I've yet to take them for a test ride and am really hoping that no other major issues pop up!

wow impressed exceeded expectations, and literally RCS19 clone. 10/10!!!!

I received these today and will be updating when I'm done with the build, but I bought these to liven up an older bike that I'm rebuilding. I'm not terribly impressed so far, at least when it comes to the fit and finish. They're obviously cast and were very lightly cleaned up before surface finishing. Mine had the smell of brake fluid about them so either mine were a return that had been on someone's bike or they were at least pressure tested from the manufacturer. I'm mostly curious as to the quality of these at this point so I'll be keeping them until I eventually switch over to a set of Adelin Px-1's. Most brake masters that I've seen are cast and then machined so I'll see how they feel. I might also take apart one of them to see how smooth the cylinder bore is and check tolerances in there. Overall the exterior quality is very mid. I'm not revolted or terrified but I'm not feeling them long term right now.

Fantastic progressive control and power.

Haven't connected my front brake as of yet but for my clutch it is a total game changer. If you were on the edge of getting this due to price done be it's 100% worth your money.

Using as a hand brake, lots of braking power in these. The quality isn't terrible. Yea there is some play in the lever but a simple washer solves that. If you can't figure that out then don't work on bikes. I would definitely buy again.

do they work? definetly. Are they well assembled? hell no. it's not the first time I order brembo 19rcs replicas and they are by far the worst examples. there's so much play in the levers due to bad tolerances it makes no sense. your levers should not wobble up and down like crazy, they should not have play where there's a spring that should keep pressure on too. stroke adjustment is there but just loose in the hole and no way to adjust it yourself, so you're going to have a variable stroke while riding because it can turn by itself. Buy adelin replicas instead of these, they are way superior.

I got this hooked up to my bike as a handbrake setup. Got it bled. And on the first ride it basically fell apart on its own. The rivet that holds the lever to the braking part completely left the chat along with the adjuster screw. I cant say i was expecting perfection with these, just a cheap handbrake lever and it couldnt even do that. Its now too late to return and im stuck with a semi fancy looking broken lever. Would not buy again

Love the looks and style of these, very straight forward on how to install