DEWALT DWA4242 Diamond Flush Cut Oscillating Blade

For me, this just became the hands down, perfect blade for cutting through cementitious plaster walls. I have a 1939 built house that I am rewiring, and finally got sick of using a sawzall to open up the walls to run wire. A sawzall ended up doing more damage as I cut through one side of each lath, and then started cutting on the opposite side of each lath, and the vibrations ended up ripping out more plaster than I intended. I burned up 3 bimetal blades on my Multi-tool, and didn't even get one opening cut, before deciding to give this Diamond blade a try. For $10 it was worth a try. I have a really high cement and fine aggregate makeup to my plaster walls with no wire reinforcing, and this blade is perfect for my application. Clean, easy cuts through the plaster, then I have to switch out to the wood blades to get through the lath, but it became an infinitely easier job with better results. I cut (6) 12"x12" openings initially (so 24 lf of cement plaster) and I cannot tell any sign of wear. That alone is worth the $10 per blade.

I recently installed 900sq. ft. Of Nucore performance lvp flooring. I used this oscillating tool blade to make cutouts around door jambs and cabinets. This thing held up incredibly. Diamond grit has barely worn at all, and I’ve made at least 100 ft of cuts. Downsides: plunge cuts were hard to make without the blade chattering a bunch, chrome finish peeled on the part but that doesn’t really affect its performance.

For my specific purpose (grinding concrete), this blade is one of the best low-cost, high-convenience discoveries of my business. The blade is long enough to reach into/under door jambs (even with door hung). Being diamond instead of carbide, it cuts concrete well and for a good while and is aggressive but doesn't gouge the concrete. I have 3 cordless oscillating tools (Milwaukee's blade change process is insanely frustrating-- stay away from that one! DeWalt is a 3-second dream to change blades so I have two of those and love them). Anyway, this blade is where it's at for cleaning up concrete corners and reaching under things (drywall, door jambs, drains, etc.). This blade worked so sell that I was able to effectively buzz across a door threshold and along a short section of wall as if it were a fine cup wheel. The longer-than-normal length of the blade (compared with HD consumer grade) probably helped with its longer throw during oscillations.

This works with Ridgid tools and works really well. However, it does not last if you have lots of grout to remove and will heat up quickly causing it to chip or break. So be sure to order extra. Mine handled about 12 inches of a 1/16th wide grout line. Mine also broke at the head but can still function (see photo). It does work between 1/16th inch gaps and will also cut tile at a slow pace. Obviously you need to use caution when using anything that has a blade moving at high speeds, but be careful especially in tight corners and tiles being close together. This should be the tool that handles the work in the open while a manual hand grout removal tool should be for corners and corner joints.

👍🏻

Says works on Rockwell but hah to modify a bit

I bought this bit to clean thin set out of tile joints and what ever else I need it for. Strong, durable and low dust. Can’t beat the price 👍👍

With a diamond coating, this should easily score a ceramic tile, which can then be snapped along the score. But it doesn't. By the time I was on my third tile, the coating was completely gone from the edge, half-gone from one side, and two-thirds gone on the other side. I had to finish the job using a ten-year-old, well-used blade from a store brand. This blade might be fine for grout removal, but a diamond coating is overkill for that application, which can be done with less expensive options without the diamond coating. If you need to cut something hard enough to actually require a diamond coating, THIS WILL NOT WORK.

Works great, cheaper than the local big box stores

Muy buena calidad

Great blade. Used it for cleaning grout and glue from tiles for re-use

Good tool.

The blade worked very well when recutting a granite top. No visible wear from the cuts made, and the quality of the cut was quite good. Not very aggressive when cutting. Considerably less expensive than other blades, was exactly what I needed. Just a note that it will not work with new Fein or Bosch starlock oscillating tools.