Zero Tolerance 0350ST Pocket Knife; 3.25” S30V Stainless Steel Blade, Partial Serration, Tungsten DLC Coating, Textured G-10 Handle, Black, Quad-Mount Pocketlip, SpeedSafe Open, Liner Lock; 6.2 OZ,Black/Black

This knife represents an outstanding value for the features provided. Speedsafe opening, S30v blade material, serrated and Tungsten DLC coating, and lifetime warranty all for $140 - wow! Extremely sharp out of the box.PROS:- S30v steel used for the blade is widely regarded as the best in the business- Speedsafe can be activated via thumb stud on blade or a protrusion milled into the back of the blade that sticks out from the back of the handle when closed. This allows the blade to be opened one-handed with either the user's thumb or index finger- Nice tight belt clip. I wear my pocketknives on the inside of my front pocket. Other knives I've tried tend to fall into my pocket due to the clip being too loose. Haven't had that problem with this knife at all.- Size is perfect for me. Large enough for a positive grip, but small enough to not feel bulky in my pocket. Blade length large enough to be useful without exceeding maximum length laws in most jurisdictions.CONS:- Knife was pretty tight when I got it. While this gives an overall impression of quality, in practice I had a hard time fully extending the blade using the thumb stud at first. You may want to apply some lube or just continually deploy it for awhile until it begins to loosen up a bit. The locking mechanism in the handle was similarly stiff, making the act of closing the blade a precarious endeavor the first few times I did it.All in all, this is my favorite knife (previously owned a couple Benchmades and a Kershaw). It exudes very high quality and is a tremendous value for the money. I expect it will last right around forever. I would highly recommend this knife to anyone.

As of right now (and since I bought it) this is my absolute favorite edc knife. Put it through some pretty good wear and tear in the woods and in the city so it's seen both sides. I've had my fair share of CRKTs, Browning, Kershaw, and even benchmades but this tops them all in my book. Not saying the other companies don't make amazing knives, I've just never found a model that has a G10 handle to prevent slippage (PNW weather), S30V blade (toughest knife blade steel within a reasonable price range), thumb and finger release with lightning fast springs, serrations, and comes in black all within a fraction of the competition's cost or a custom shop blade. This is a meaty blade, definitely built for potential survival situations so keep that in mind if you have smaller hands. With more material comes a higher weight too, so all things to keep in mind. I'm 5'10"-5'11" with average medium sized hands and it's not big for me by any means so hopefully that puts it into perspective. Anyways, this thing is incredible. Can't recommend it enough.

I love this knife. The knife is big but not big. I have carried gentleman knives previously, and have a Kershaw Clash and a Ka-Bar Warthog. While reading a review about the Clash, the gentleman mentioned the ZT 0350ST, and I researched the ZT 0350ST and I ordered it for myself. This has been my EDC since it arrived.I am a heavy stocky guy and I do not feel the weight of the knife. My occupation requires suit and tie the majority of the time, but whatever the attire this is the knife that accompanies me. I keep my ZT 0900 with me as well-just in case I have to use the knife at work and my colleagues are around-the 0350ST may freak some out due to its size.I have ordered the 0350 (plain edge) and also the 0350BW. I prefer the serrated edge as I like to be prepared for whatever comes up, and the other two knives are back ups. I have removed the clips as this is not a needed feature for me.This knife, or line of knives, is my preference and I love the warranty and free sharpening service provided by KAI. I highly recommend this knife.

You can't go wrong with Zero Tolerance knives. They are made in the USA and the quality is outstanding. I also own some very good knives from Kershaw that are made in China, But the ZT knives are my favorites. I like seeing that "made in the USA" on the blade.The ZT0350ST G10 has a great flipper action and an above average strong liner lock. The G10 scale handle gives a good grip. The black DLC coating on the blade also looks good. The blade is super sharp right out of the box,This is the kind of knife that will last for years doing indoor or outdoor work. A great EDC or tool box knife.The pocket clip is much to tight. I would remove the clip before adjusting it to put less pressure on the tiny screws. You could also use a good knife sheath if you want to carry it on your belt. .

This is a super high quality knife, way better than I expected it to be. I was afraid it would be on the small side, but it's the perfect size for EDC. The G10 is grippy, but not too agressive. Normally I'm not too fond of assisted opening knives, but the speedsafe system on this one actually works pretty well and isn't over torqued like a lot of other knives. The blade shape is really cool, and the flipper is a must on any knife I buy. The main thing I noticed is that when you hold it, it feels REALLY sturdy. This thing is built like a tank.

I've had pocket knives since I was a little kid, I always carry one on me, Always. I have swiss army knives, SOG (P.o.S. knives in my opinion, I'll never own another), Spyderco (good steel and design, gota love the super leaf), and many many many others. This knife right here is my Every Day Cary from the moment I picked it up I have been impressed with its design. Black, Diamond like Carbon coating on the blade, Textured G-10 on the Handle, solid frame, good ergonomics, assisted opener is solid and still crisp after opening it multiple times a day for years, awesome weight and length, a Perfect tool with the razor sharp s30v steel combo blade. I love this thing, I make and design my own knives and this is the one that I cary with me every day clipped to my belt. You will not be disappointed with it.

allergeilstes Messer bisher! jetzt schon mein 2. da ich das erste verloren hatte und ich es einfach ohne nicht aushieltbin Handwerker und damit kann ich mein Brot schmieren und auch Kabel durchschneiden..nur lernen wie man es wieder scharf bekommt, muss ich noch

Habe das ZT-0350ST für einen Freund bestellt. Natürlich habe ich es mir vorher angesehen und ausprobiert.Die G10-Griffschalen sind sehr griffig aber nicht sehr aggressiv gekörnt. Sehr angenehm in der Handhabung, aber nicht so rau, dass es einem die Hosentaschen aufwetzt. Bis auf das große "ZT-Logo" ist der mitgelieferte Clip sehr schön und funktioniert auch einwandfrei. Man kann diesen in allen vier Positionen anbringen. Also links, rechts, tip-up und tip-down. Die Klinge kam sehr schön zentriert ohne jegliches Klingenspiel. Als Klingenstahdl kommt S30V zum Einsatz, welcher sich durch hohe Korrosionsbeständigkeit und Schnitthaltigkeit auszeichnet. Etwas schwer zu schärfen, aber eigentlich ein sehr guter "Premium-Stahl". Da das ZT0350 mit einer "Recurve" in der Klinge daherkommt, sicher nichts für Anfänger unter den Messerschärfern.Bei der Öffnung der Klinge kommt eine Federunterstützung zum Einsatz - also "assited opening". Das ist Geschmackssache und in manchen Ländern auch rechtlich relevant. Diese Feder kann beim ZT0350 allerdings sehr leicht ausgebaut werden, wenn man lieber einen manuellen Flipper hat. Dies ist vor allem Möglich, weil die Klinge im geschlossenen Zustand von einem "Detent ball" unter Spannung gehalten wird. Das ist nicht selbstverständlich, da bei vielen assited opening Flippern die Grundspannung der Klinge durch die Feder bestimmt wird.Einziges Manko ist das wohl recht hohe Gewicht von ~160 gramm. Für ein Messer, das man täglich eingesteckt halt etwas schwer und auch sehr Hosentaschenfüllend. Dafür bekommt man einen "Taschenpanzer" mit minimalsten Toleranzen in bekannt hoher ZT-Qualität. Mit einem Kauf macht man hier bestimmt nicht viel falsch.

Hey :) Heftiges Geiles Messer👍Alles Original 👍 hatte auch erst meine Zweifel bei dem Preis.......😂😂😂Klinge zu 98% Mittig, aber is noch Ok👍Lock steht TOP 😀Ne bin wirklich Begeistert 😀👍Ich hab Handschuh Größe 9,5 und das is Perfekt,viel Größer darf die Hand nicht werden😀Und die Zähne an der Klinge sind sehr gut gemacht das sie eigentlich garnicht Stören,man kann damit sogar super Schnitzen👍