ClosetMaidPull Out Cabinet Organizer 2, Heavy Duty, Slide Out Pantry Shelves Drawers for Kitchen, Bathroom, White, 11-Inch Two Tier

My pantry is narrow with a door on it.. I couldn't find my products in the back. These slide out baskets solved problem. I love the ease of use. Great for getting organized. I highly recommend this product.

The draw was easy to install under my kitchen sink. I have installed other similar drawers and quickly tried to placed the drawer in the railings. I was not successful so I read the directions and found that a rod attached from left to right on the bottom of the drawer had to ALSO be placed in the railings. After doing this the drawer worked great!!

Makes it so much easier to organize my under sink items without having to crawl under to find stuff! Great quality product and looks even better!

This is a well-made product, and the painted coating was properly done. It comes in eight pieces (the wire baskets the two roller frames, and the exterior support brackets). Fortunately, it also came with the appropriate wood screws for mounting the bottom roller frame and the exterior frames as well as machine screws to mount the top roller frame to the exterior frames. The instructions were a bit weird to read, as instructions go, but once I got past the first picture frame I figured out the operating mechanism.In your cabinet make sure you measure the dimensions fully, and don't just go by the footprint of the product. The footprint is about 9.5 inches but the exterior frames protrude out, so if you have any supply or drain pipes under say your kitchen or bath vanity sink you'll want to ensure full clearance all the way up and all the way back.Also note that you need a lot of manual dexterity to assemble this into place. You'll have to physically mount the exterior frame and bottom roller frame to the cabinet. This is no easy task if you have a tight space or if you have physical dexterity issues. I'm very mechanically inclined and it took me 3x longer to install than anticipated because of the tight space I had to work with. When they suggest you give 1.75" from the cabinet edge to the front of the frame, make absolutely certain you do so. A quarter inch off will potentially impede your ability from fully closing your cabinet door as the basket protrudes out a bit past the foot print.I suggest mounting the front of the drawers first. You'll have four screws to install--one on each end through the exterior frame and then the innner-most holes which secures the exterior frame and roller frame together. Once the front is secured, then proceed to mount the back set. I suggest starting from the front and then the back to fully ensure your 1.75" spacing remains accurate. Again, a quarter inch off and you'll be hosed.Now that you've assembled the eight bottom wood screws to the cabinet, then proceed with mounting the top roller frame to the top part of the exterior frames with the machine screws. Again, a lot of dexterity will be needed. Pop one screw to each of the four top corner assembles. This will ensure everything successfully lines up (similar to replacing a wheel on a tire you changed). Apply your phillips screwdriver to the top of the screw with one hand and hold the nut on the bottom part of the screw with your other hand, then twist the screw one. Don't even try to twist the nut on as there's not enough clearance, even with the smallest of fingers.Once all machine screws and corresponding nuts are assemble to about 90% maximum tightness, go back and tighten each one by hand until secured--but not overtightened.The basket assemble can be tricky. You'll see that while the front and rear of the baskets may appear similar, they are not. The rear of the basket has two bars on the bottom running perpendicular to the basket. This is the rear part of the basket assembly. Both of those bars have to go into the roller frame slots. You'll have to raise the top of the basket about 25-35 degrees to fit the bars through. SPECIAL NOTE: There's this tiny piece of plastic on the outermost perpendicular bar. For some reason the plastic piece moved on one of my baskets, and thus it impeded the ability to slide this into the roller frame slot. It was easy to move back into position and the basket slide in lickity split thereafter.Overall, I like this product. I've spent hours and hours searching for shelf pull-outs. I liked the steel gray color as it makes it look less cheap and goes with the brushed nickel decor of the bathroom fixtures. It's pretty sturdy, considering it cost less than $30, and well worth the money--as long as you have the mechanical dexterity to assemble this.For the sake of other people, it would've been nice if they had suggested to pilot drill the screw holes and what size drill bit to use, but that would've complicated the instructions and require yet another tool on the needed tools install list. You should always try to pilot drill into wood, sheet rock, plastic, or metal, first, for significantly more easier installations.

Holds many canned goods without binding the basket.Just purchased two more.😄

It was very easy to put into my cabinets and affordable I also bought some for my neace

Sliding shelves are easy to install and work well.

I could say this is a great organizer. Very sturdy as well. Makes my life easy by pulling out my rice container. No more lifting, no more scratching my cabinet . Just slide and scoop rice and push it back in. I love it.

Es un poco caro, pero sin duda es una excelente compra si se busca optimizar espacios y hacer mas funcional el proceso de cocina. Es muy resistente, los rieles corren bastante bien y es muy fácil de instalar.

Perfecta, muy practica, útil, bonita y se ve todo organizado

Got two of these quite a while ago and put them in recently. I noticed that I didn't have a review (but had taken photos) so here it is. 😃When I got them I noticed that the basket was fairly loose (side to side) in the track and thought this might be an issue. However, this was an easy fix (see first two photos) by loosening the screw in the corner of the rail and then pushing/bending the bent part where the screw goes through to exactly 90°. Then replace the screw. Do this for all four corners. To bend it I just pushed it down on a piece of carpet, but careful use of a hammer should be ok (use something to protect the finish like a small block of wood). Once done it has very little side to side movement. Don't go past 90° or you might have trouble putting in the basket.They come with four self-tapping screws and overall feel quite sturdy. The rail has room for eight screws so I felt better putting two extras in the back (two in front & four in back), just in case we happen to put something heavy in the front of the basket and pull the basket all the way out. Tip: Remember to drill a small hole first so the screw doesn't split the wood.I was able to fit two baskets in one shelf (open, my doors are 22+1\4" apart), I slightly towed the back of the two rails out from each other in the back of the cupboard so it would keep the baskets together if they were pulled out at the same time. This also helped to not rub the inside of the doors too much.My first two were around $20 each, but even though they have gone up $7 I just ordered four more as they are built well and still the best price.Recommended, my wife loves them!

Perfect fit to mu cupboard

got a good pricevery strong, very good, very satisfy