SurebonderH-810R Full Size 10" Acrylic Tough Hot Glue Stick - 8 Pack, Multicolor

Great holding power, takes a few moments to set up, but the hold lasts.

Pdr repairs.

Very good purchase

10000% SATISFACTION!!!!!!!! The ONLY glue stick I will use and I use it for EVERY project from miniatures to furniture repair, I hav used it on metal, wood, plastic, rubber, jewelry, glass, indoors/outdoors, shoe repairs, clothing, everything!!! If u use it to decorate or repair clothing or fabrics you cannot however put them through the dryer. As it is intended to melt under heat, it won't hold up; but it does not turn into a sticky mess. I hav accidentally thrown shirts in dryer that were embellished and all that happened was the embellishments fell off and glue remained on garment or came off in one solid piece. (And I glue EVERYTHING! My kids say "I" am Doc Mcstuffins! Lol) I have used this glue many times to make purses out of an old skirt that was too cute to part with bc of size and a belt by glueing bottom of the skirt shut al usu g belt as strap instead of through belt loops (and I REEEEAAALLLLY overload my purse every day, it weighs a ton!!!!!) and I hav never had ANY failure!!!

I am very happy with the purchase of the Surebonder H-810R glue sticks, I bought 5 packs!I have used them before in the shorter 4" format and they were great for my work in electronics.So far I've glued wires and used it to seal up buttons and enclosures for waterproofing. The glue bonds extremely well to all of the plastics I've tried.I have even used it as standoffs for PCBs and to cover exposed pins.While they do take a little longer to cool solid vs. the standard ones but that’s a small price to pay for a much better glue.I also like that they are truly clear and not yellow tinted like some of the other glue sticks I've used.The 10" length is great for the  Surebonder PRO8000A Glue Gun, 180-watt  i bought.Using the 4" pieces to put it mildly, was a massive pain!For the price of the packs, i would recommend picking a bunch up. They should last forever and running out is a massive pain.

So far, this is the best hot glue stick I've tried. I have an Aleene's glue glue that's bronze and comes in a white box with 3 interchangeable tips. The glue gun isn't the cheapest but it's one of the more expensive ones from Michael's craft store. I guess it's an "average" gun. These glue sticks are thicker than usual and have to be really be fed into the gun but it fits. It s quite snug so every so often, I have to push the glue stick through. I use this mqinly on fabrics. On the high setting, the bond is pretty strong but I let it sit for about 12 hours before I even attempt to pull anything apart. If I really force it, the materials will pull apart. For metal on fabric, this NEVER works. For plastic or metal on plastic, this works well. I just purchased a Surebonder glue gun not too long ago and I'm excited to see how the glue works with that.

Overall, this is a great glue stick. I used it to bond metal to plastic and it seems to hold well.These are 10 inch sticks -- they may seem really long but as I explain below -- the material is very flexible, you can easily cut these sticks with regular scissors.I only used regular hot-temp glue sticks before, so below I will outline some surprising findings about acrylic sticks:* The glue will remain very flexible even when set - this is in sharp contrast to regular glue sticks that harden as they set so think of the acrylic glue stick as if it will become something like rubber - this may or may not be what you want* The glue stick requires *really high* temperatures - I used Surebonder Pro2-60 -- it is a high temp 60W gun and I would say it is barely enough

Did some cabinetry repair for top support for countertop and bead on 1/2 mdf board to maple face and back face (only received staples) was very strong in 40 sec. Also tried on a rigid plastic to mdf and plastic to plastic: both so strong that impossible to pull apart. Seems far superior formulation than the standard Gorilla Glue stick packs sold here (which I also purchased for more general use). Says is sandable..will try soon to make some stairwell skirt from mdf pieces joined before nailing up. Will update.

Very good adhesion.

I have used these sticks on a few projects now and have had no issues with this product at all. I love the long sticks because it means less time waiting for the glue to melt when putting in new sticks. In fact I have found I get easily frustrated with the short sticks now after using these longer ones. Over all a good product.

They are a bit too soft and flexible for feeding through the glue gun properly

Haven't used it too much yet, but happy so far with its application on vinyl (needed a glue that would stay flexible).

When you need a premium hot glue adhesive, this one works very well.