LK 3 Pack for Google Pixel 7 Screen Protector, 2 Pack Camera Lens Protector, Tempered Glass Fit Lens Cutouts Ports, one second Fingerprint Unlock, 0 Bubble, with Easy Installation Tool

I've purchased these a few times now both for my old phone and more recently, for my dad's phone. Installation is fast and simple and when done right, it's almost impossible to mess it up since they even provide a guide. I've done bubble/lint free applications each time with no issues. The protector adhears perfectly, is clear and protects really well even after months of use. It doesn't affect thumbprint access but if you're having trouble, I suggest increasing textile sensitivity on your phone settings and it should fix the issue. Overall, I have zero complaints and will continue to recommend this brand both for the price point and quality of the product!

I bought this when I got my new S21, and initially was somewhat unhappy- like others have mentioned the quality looks good, and its easy to install, there's no bubbles and I even tried to wash and reapply it once. The finger print reader does lose some sensitivity, but I found an easy fix for this- when the reader wont register, I noted that moistening the finger (in any way eg water drop, hand sanitizer or even licking) and then pressing down on the FP reader usually fixes the issue most of the times. My problem was that, at the top right corner the screen protector lifts off slightly leaving a small 4mmX4mm air bubble that does not spread- only happens on the top right corner on my phone- I cycled through 2 protectors and complained to the company with photos and they sent a free replacement- I put a new one on (my 3rd) and again the same problem. I then accepted that this was either a manufacturing issue with this screen protector, or an uneven area on my phone, and left it on, with plans to try another brand later- until today that is. Today I dropped my phone while holding under my chin- a 5- 5.5 ft drop onto a hard wooden floor. It was a hard knock and my phone had this screen protector and was also in the S view flip coever made by Samsung. I noted fine cracks- I initially thought it was my phone screen, but on closer exam, there was small glass pieces coming off of the screen protector- the screen protector had taken the brunt of the impact- see photo. This screen protector saved my phone screen today. I have now applied my last one on and am ordering a new set. Not sure why phone manufacturers cant put a better quality glass on a $900-1000 device that is thin smooth and slippery and prone to being dropped, but thats a different story

Super easy install that came out perfect. Fit is great and everything seemed to be excellent. However, the fingerprint reader does not work reliably. I re-registered my prints and turned up the sensitivity, and it works maybe 1 in 4 times. If you don't use the fingerprint to unlock, then it is perfect, but I use the sensor, so I returned. UPDATE: Accidently ordered these again, and the new set work almost perfect! I don't know if they changed something, but fingerprint sensor works probably 90% of the time. Still have some issues if my hands are really dry or really wet, but I would say it is reads first or second time almost every time. I know that sounds not so great, but it is actually pretty reliable. Also, i cracked the heck out of it with a bad drop, and the actual screen underneath was undamaged. Highly recommend for a glass screen protector that still allows use of the fingerprint scanner!

So a huge lk screen protector person here. I've had the film ones in the past for my s10 and they worked well with the curved screen. I like that they are self healing and for me lasted 6-8 months before I replaced to keep the phone looking good. I'm fairly rough on phones. Anyway I purchased both a set of film and glass protectors now with the s21. I have 4 phone in my family so figured I would see what works better with the new design and finger print scanner. First was the film. Easy install soft feel on fingers. Case friendly. Then the glass. Super easy install. Super smooth surface. Both have the glass camera lense cover. Work well. Finger print recognition works well with both film and glass. Now I installed the protectors before setting anything up. I know some say they have issue with it working. Normally my fingers don't work but I thought I would test on the new phone with these and they work just fine. Overall my preference at this time is the glass. Just a better feel. Also case friendly.

If you follow all the instructions this screen protector should work great for you. I've done a few of these before so it was easy to install. The finger print reader didn't work great right away but started to read better after a few days. The touch screen works fine a majority of the time. I had a few issues but if you turn on the sensitive touch in you settings any issues you might be having should go away. Also rescan in your fingerprint on occassion if you're having issues and keep your screen clean will reduce issues as well. This does show more smudges than without the protector so I have to clean my screen a little more often. I have had no issues with air bubbles or it peeling up on the edges like I've had with other brands.

I had 1 screen protector that was defective in the package, it had no clear strip on it so it was stuck in the over wrap. Also with the other one installed that was good, the finger print sensor barely works. I have the settings set correctly but it takes 3-4 tries before it works. Price is good but you get what you pay for. 2-5-21 UPDATE I raised up to 3 stars as after contacting the company they replaced the damaged product. It does go on easy and looks good BUT I'm only giving it 3 stars as the finger print scanner does not work well with this. If you don't care about this it's a 5 star product for the price. I value the finger print scanner the most.

Great product so easy to install, Great value also

I like that these screen protectors come with a frame to align it on your phone and the screen protector itself fits nicely. However, I've now been through two of them in the span of a month because they bubble up really bad to the point of being annoying. I've never had screen protectors do this on their own before. The first one I put on started bubbling in the upper right hand corner after about a few days of use. So I replaced it, thinking maybe I installed it incorrectly or I got a dud. The second one went on nicely with no bubbles and seemed promising. It has now been two weeks and it just started bubbling out of the blue in the middle of the left side of the screen protector last night. I tried squeezing it out and it doesn't actually go away. Woke up this morning and it's only gotten worse. It's at this point that I'm calling these screen protectors junk, at least, the adhesive. Other than that, I haven't noticed a lot of issues with touch sensitivity decreasing or issues with scratching. But then again, these screen protectors haven't been able to stay on long enough to really experience situations where a good scratch might happen. All in all, look for different screen protectors.

Das Panzerglas ist super leicht, ohne Luftblasen anzubringen. Die Fingerabdrücke musste ich neu einspeichern, aber funktionieren jetzt ohne Probleme. Bei der Bedienung des Touchscreens kann ich auch keine Probleme feststellen. Was ich gewöhnungsbedürftig finde ist die dicke im Vergleich zur vorinstallierten Folie von Samsung. Außerdem habe ich das Gefühl, dass die Farben etwas verändert sind, aber ich denke auch daran werde ich mich gewöhnen. Der erste Eindruck ist sehr gut. Zur Haltbarkeit kann ich zu diesem Zeitpunkt allerdings noch nichts sagen.

Ho deciso di prendere questo proteggi schermo in sostituzione di quello Spigen, che ha resistito e protetto il cellulare ma era scheggiato. Sono rimasto davvero sorpreso da questo vetrino, che si è dimostrato luminoso e tutto sommato semplice da posizionare. Il riconoscimento dell' impronta mi sembra addirittura migliorato, rispetto al precedente. La cornice per aiutare il posizionamento aiuta ma occorre un aggiustamento manuale.

Je laisse rarement des avis. Mais là, javais envie de rassurer les futurs acheteurs. J'ai acheté cette protection car c'est du verre trempé. L'idéal pour protéger mon écran, les films ne protègeant que contre les rayures. Il est hyper facile à installer mais VRAIMENT! 0 bulle, rien. Bon, je l'ai mis un peu de travers mais c'est un détail. J'ai une coque qui revient sur l'écran de mon S21 (une Spigen ultra hybride achetée aussi sur Amazon). La protection a pu être installée sans problème car elle est un peu plus petite que l'écran. Donc c'est impeccable. Elle est hyper agréable au niveau sensation. J'ai vraiment l'impression de toucher l'écran du téléphone. Elle ne graisse pas. Et enfin, et pas des moindres au sujet des empreintes. ... tous ceux qui disent que les empreintes ne sont pas reconnues, vous n'avez pas respecté les recommandations du fabricant ! Reprenez vos empreintes dans le téléphone après la pose du film. Une fois que c'est fait, c'est impeccable. Alors oui, c'est un peu moins sensible. Mais franchement, couplez cela avec la reconnaissance faciale et vous n'aurez aucun problème. Honnêtement c'est le meilleur verre trempé que j'ai installé depuis looonnngtemps! Merci au fabriquant! Si vous avez apprécié ce commentaire laissez un like. 😉

Finger print scanner can't detect fingerprint even after increasing sensitivity

Me parece un producto de buena calidad y muy facil y cómodo de instalar. Habia puesto una mala calificación por problemas con el lector d huellas. Pero no era problema del protector. He arreglado el problema que tenia y el protector funciona a la perfección