Plugable USB 2.0 OTG Micro-B to 100Mbps Fast Ethernet Adapter Compatible with Windows Tablets, Raspberry Pi Zero, and Some Android Devices (ASIX AX88772A chipset).

質問欄でXperiaZ4でも使えるとの回答があったので購入しました。 が、最初は使えず、、泣 いろいろやって今は使えています。 ちなみに、語学学習用のタブレットでは（中華タブレットくらいのスペック） 差し込むだけで簡単に使えました。 以下、XperiaZ4での接続方法を記載します（私の場合はこれで使えています） ポイントは2点。 1 モバイル回線の切断（auで購入） 設定→データ使用→モバイルデータ通信をOFF 念のためネットにアクセスして「オフライン」になっているか確認 2 設定→Xperiaの接続設定→USB接続設定→USB機器を検出→検出中 念のため再び[USB機器を検出]をタップ→下段に「USBを検出しました」と表示がでる これで、ネットに接続できると思います。 ただ、、、 電池の消耗が信じられないくらい早いです(涙) 追記 タブレットが故障してauで無償交換してもらって以降、 接続が出来なくなりました 語学ラーニング用のタブレットは今まで通り接続出来るので こちらの商品の不具合ではないと思います Android version7.0になったのが原因かもしれません （それまでは5.0で使えていました） ほぼ毎日使っていたのでかなりショックです(泣)

I purchased this adapter to add connectivity to my piZeroW running piCorePlayer (based on piCore - based on tinyCoreLinux) as I had coverage issues with WiFi. The ASIX drivers were already loaded. By simply adding the net-usb-(kernel)-pcpCore.tcz from the PiCorePlayer library through the pcP GUI and rebooting, the adapter was recognized and activated, and assigned an IP Address by DHCP. So from a tech / usability standpoint, easy and efficient solution, simple to install. From a cost prospective, the adapter is more expensive than the board itself ... If I had anticipated wifi issues I would have used a pi3B+ or any other model with onboard LAN ETH . There are cheaper alternatives using GPIO but for my usage GPIO is already used by two stacked hats so usb adapter was my only solution.

Buena calidad

Cet adaptateur marche parfaitement avec ma tablette Samsung Galaxy Tab S2 mais pas avec mon téléphone Galaxy S5. C'est facile de le mettre en route (Autre connexions, Ethernet) et nul besoin de télécharger de pilote. Ca a l'air de consommer pas mal de batterie (on ne peut pas charger en même temps) et n'est pas reconnu par toutes les applications. Netflix ne le reconnaît pas et demande une connexion wifi, par exemple. Je l'utilise surtout quand j'ai de gros transferts à faire (vidéos, photos...). On peut s'en servir sans branchement sur le secteur, contrairement à l'adaptateur Samsung, qui lui, charge en même temps mais qui ne marche pas du tout sans branchement secteur.

I bought it to use with Android tablet (also works with number of phones). Pros: 1. Works as advertised. It does get little warm in use but I was informed by manufacturer that is normal for this kind of device. (heat dissipation). 2. Light indicators on device help in knowing whether connected to internet or not. 3. Excellent customer service. They promptly reply to concerns. Cons: None. Been using for over six months and faced no issues till date. Uses of this adapter: 1. Work well with window tablets (not used with RT but full windows version). 2. Work with Android devices provided - (a) The device has OTG port (ie usb host facility) and (b) The manufacturer has installed the ethernet drivers. If the device only has OTG port but no ethernet drivers then it will not connect. (A) Tablets that support ethernet connection: 1. Asus Zenpad S 8 inch tablet. 2. Lenovo A10 (latest 10 inch tablet). 3. Samsung Tab 4 (8 inch version, 10 inch version and 12 inch version but 7inch version does not support it). 4. Samsung Tab 8.4 5. Samsung Tab A series. 6. Samsung Tab S series. 7. Nexus 7 inch 1st generation on Android 4.4 8. Nexus 9 inch tablet (B) Phones that support this adapter: 1. Motorola G 1st generation, 2nd generation and 3rd generation. 2. Motorola X 1st generation, 2nd generation and 3rd generation. 3. Motorola E 2nd generation (but not the first generation). 4. Samsung Galaxy Nexus 5. Nexus 5 (Nexus 4 does not support ethernet connection) 6. Nexus 6. 7. Nexus 5X and 6P. 8. Asus Padfone X 9. Asus Padfone X mini (only the phone , the tablet portion does not as the micro usb socket is not OTG). 10 Asus Padfone 4.3 11. Sony Z3 , Z5. 12. Asus Zenfone Go. Other Devices - 1. Google TV Box 2. Nvidia Android tablet generation 1 and 2. Example of devices which have OTG port but do not support ethernet as there are no ethernet drives include - Samsung Galaxy S4, S5, S6 (infact most Samsung phones), Xiaomi Redmi 1S, Redmi 2, Chromecast. Following brand phones are not supported - 1. LG phones 2. Samsung Phones 3. Xiaomi phones 4. ZTE phones 5. HTC phones 6. Acer phones 7. Huawei phones 8. Windows 8.1 phones and following Windows 10 phone - Lumia 550. 9. Blackberry all models 10 Unnecto phones Following brands support this device with built in ethernet drivers - 1. Motorola 2. Sony 3. Asus 4. Nexus Devices Update Marshmallow has introduced usb ethernet under the developer settings. However still Samsung, LG and HTC phones running Android 6.0 do not support this adapter. Hope the review is helpful for someone planning to buy this adapter for an android device. Update: Samsung S8 / S8 Plus phones have ethernet settings in the settings menu and it works with type C to ethernet adapter. Update (25 Aug 2017): Works with Lenovo Phab 2 Works with Moto G 5th Gen