🔌 Power Up Your Projects with Confidence!
The Cllena DC/DC Voltage Converter Regulator efficiently steps down DC 24V to a stable 12V output, providing a powerful 40A current and 480W of output power. Its waterproof design ensures durability in various environments, making it an essential component for automotive, marine, and industrial applications.
| Manufacturer | Cllena |
| Item Weight | 1.1 pounds |
| Product Dimensions | 5 x 2 x 4 inches |
| Country of Origin | China |
| Item model number | DC2412-40 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | DC2412-40 |
A**R
Fast shipping
Works great and easy to install
C**D
Works well
Works great at converting 12V from car to 24V for my Zerobreeze battery. Remember, it uses a lot if amps. Make sure you have a good conbection and use a fuse for protection.
J**A
Accurate
I used it to lower a 24 v battery to 12 v. It does it accurately. I put on 300 w load and it has no issue. So far so good.
J**N
Delay before output terminals receive full power
Question to Seller: I purchased the 24V to 12V 20A 240W version of this converter. After install there is about a 4 second delay before full current flow is established. Is this a defect? For example, if I connect a pilot light or multimeter to the output side it immediately shows 12v. However when I connect any sort of load (small 12VDC motor for a kids power wheels) there is a delay of about 4 seconds before the motor starts to turn. I purchased the 40A 480W version of this converter in the past and it does not have the same problem; it seems to provide full current immediately.
T**S
Great for Bluetti! AC200 and AC200P
My Bluetti AC200 and AC200P 'solar generators' will charge at 100 watts from a 12v source OR 200 watts if from a 24v source. I had a LiFePo4 280ah 12v pack set up that has gobs of power but would take forever to charge the Bluetti at 100 watts.I figured if I could boost the voltage from the LiFePo4 pack to 24v, then I could supply the Bluetti with 200 watts of recharge when it needed it. The large LiFePo4 battery pack is charged by 1500w of solar so it had plenty available.In short, it worked like a charm! This device supplied 204 watts of 24vdc power to the Bluetti to keep is topped off while pulling 16.8 amps from the 12v battery. I used it like this for several months without a problem and can attest that it works great; just make sure your wiring from the battery to the 12-24v booster is of sufficient gauge.I recently upgraded the battery pack to 24v so I just bought the 24v-to-48v version of this product so I can charge the Bluetti at a full 700 watts at 48v from a 24v source. Since the unit is rated at 960w (20a), I do not expect any problems at all. I'll add the review on that product once I have it for a few months.Highly recommend!
Trustpilot
1 month ago
3 days ago
