Microphone Shock Mount Mic Holder - Anti Vibration Spider Shockmount Compatible with Many Condenser Mics Like AT2020 MXL 770 MXL 990 Samson G Track Pro Rode Procaster NT1-A Neumann U87 etc.

I've been looking for a secure shock mount for my 20+ year old Groove Tubes 5sm microphones. This doesn't fit like the original but that's ok. The short 22mm adapter works and tightens right up. It's a tight fit but can get the mic cable on and off. In the pictures, that's the black collar. If you have the original screw collar as I do (silver in the picture), it's a little easier and there's more room for the cable end but, if that's lost, don't sweat it. One of the four adapter rings gets it done. Well built, not the heaviest out there but sturdy enough for most mics that it fits but . The long 25mm collar fits Neumann U67/87 and many clones including Slate ML-1 and United UT Twin87 but I wouldn't use this on my ML-1 Vintage, a much heavier microphone, even though it does fit. The long 22mm collar fits my MXL 990 and many similar mics. The short 22mm collar fits my Groove Tubes 5sm. There is also a 20mm collar but I don't know what those fit. It would be nice if there was also a short 25mm collar for the Neumann TLM 102, 103, 193 and others — but there isn't. Oh well. This includes an extra pair of bands and a 3/8 to 5/8 stand adapter. Great bang for the buck and I couldn't be happier — especially at this price. The bands are not as heavy as some others but the mics I’m using don’t have a problem with it. I'll be buying more of these.

Built solid - much better than the other crappy shock mount I paid too much for at Guitar Center in San Jose , CA! I especially liked the ability to pick from 4 screw adaptors. The rubber gasket rings were useful, too! With the old shock mount, I was always fighting with keeping the darn black rubber bands hooked on to the mic. Now...watch for me soon on, talking on videos on YT using this brand new "357 Magnum" artillery shock mount!!

Mostly works.. when it does it’s great!!

The upper section of the OEM shock mount of my 20-year-old Nady TCM-1050 bit the dust (several fused joints came apart) and could not be repaired, so I ordered the Boseen to replace it. Unfortunately none of the four mounting rings were compatible with this mic, and the OEM Nady mounting ring didn't quite work with the Boseen either. Fortunately I had anticipated this as a possible problem and hadn't yet tossed out the busted Nady shock mount. I was able to easily swap in the (unbroken, intact) lower section of the Nady shock mount, and I am now back in business. The parts from the two shock mounts are visually a good match. If you compare the two sections in the photo I've posted, you can see that the main Boseen mount is quite a bit thicker and robust-looking compared to the Nady mount. The articulation screw is also nice and beefy, which is important for me because this is a rather heavy mic. So far it is able to completely support the mic with no problem. The suspension strings are also quite thick and strong compared to what original came with the Nady mount, and Boseen generously provided a second backup set of strings, which is a nice touch. All in all, I am extremely pleased with this shock mount.

This is an all-metal construction and looks as good as shock mounts 4 times the price. I use it with my Warm Audio condenser mic and it looks pro and feels completely solid on my boom arm. The color is good and it securely attaches to my microphone. It also comes with a number of different fittings. Be sure to look at the compatibility list before you buy, it doesn't fit all microphones. Highly recommended.

I have scotch tape in my 4 year olds arts and crafts drawer that would do a better job of holding the thousand dollar microphone that I put in this shock mount. not only would the scotch tape hold it better in place, it is far more trustworthy and durable over a period of more than a few hours. How in the world are you supposed to tip the microphone vertically with fittings that do not either screw into the shock mount or somehow attach to the shock mount? The fitting where you screw the microphone into slides in and out of the shock mount with less than a pound of force. Did this company think that I was using an anti-gravity microphone? That has been placed under a spell of weightlessness by some old-coot wizard in blue, star covered drabs? I have mulled this over and over in my mind and for the life of me I cannot think how in the heck this company would release this to the public as a viable option for securing microphones that weigh more than a hefty wet fart. Dispicable! Thank god for amazons amazing return policy that allows me to get a refund on such a useless product.

Fit and function as described no problem with installation of my microphone Samson co1U no issues with previous reviews the metal corners are welded no instruction so I can only guess as to the purpose of the 4 o rings no issue with mounting of microphone very sturdy this a moderately heavy microphone mount nuts fit and I used an oring to help keep the mounting nut from coming loose extra tension bands but no expo how to install as no instructions assuming it’s easy at time of replacement to figure out overall excellent My cat approves

Stealing these 3 years later it hasn't loosened definitely worth the money and it was very easy to mount. It's not legally adjusted since it's installation and it is used almost every day for the last couple years. It does buffer some of the noise within that small area but obviously it cannot filter everything.

Es un soporte pesado, por si lo usas con una base de mesa o tripié delgado o ligero, le agregara mas peso al peso del micrófono. Una vez solventado el problema del peso, es de muy buena calidad y tiene adaptadores para todo tipo de montaje de micrófonos. De verdad me sirvió mucho que trajera los adaptadores para diferentes entradas, pues evite comprar otros y puedo usarlo con multiples micrófonos de diferentes marcas.

It fits my NTA2 rode mic with smooth ease.

وصلنى دلوقت psm1 مش اللى فى الصورة انا عايز أبدله أو ارجعه واشتريه من موقع تانى للأسف

The best shock-mount I've ever used (and that includes Rycote, not to diss). It is super sturdy, can use SO many mics with this, able to take heavier mics (and subjectively it just looks amazing). If you can only get one shockmount, while others will do the job, this is the go-to for me. I can't wait to buy more of these.

It will work with Samson G Track Pro. Warning however: the mount interferes with the buttons (they are usable if you reach in) and with the ports in the back (not usable). Samson makes a mount for the G Track but it doesn’t seem to be available in Canuckistan.