Premo Polymer Oven-Bake Clay, White, Non Toxic, 8 oz. bar, Great for jewelry making, holiday, DIY, mixed media and home décor projects. Premium clay Great for clayers and artists.

If there is less than one star i will give this product its either very old or stored in hot place.. Its hard like rock and i was surprised that i cant return it... Amazon should look again to this matter.. This is sheeting if i have bad clay i can sell it in Amazon... This is last time i purchase clay from Amazon and this is not the first or second time

The price is high

Un prodotto molto valido ordinato più volte,e ogni volta è tutto ok. Lo consiglio

todo bien

Sculpey Premo is my favorite go to clay. It holds shapes and size really well. I’ve been buying it for over 40 years. It’s very reliable. Love it❤️!

Arrived quite dry :( was able to save it with vaseline tho :D For anyone that also recieved theirs dried up you can still salvage it by crumbling it up into tiny peices and adding either vaseline or baby oil and hand mixing until its all soft again

I have been using this clay to craft miniatures and other types of sculptures. This clay when cured properly is very flexible without cracking and is great for many different uses. My clay arrived fast and was in great condition not old or dry. TIPS FOR THOSE WITH ISSUES For those state clay is hard to knead: Clay can be more difficult to work with in colder weather. The colder the harder the clay will get & the warmer it is the easier it is to work with. You can warm it in your hand, a cup of hot water (not boiled) or place it on a heating pad so it will soften up. If clay is dry: mix it with translucent liquid sculpey and if you dont have any of that a little bit of baby oil will work just do not use to much as it will break down the clay. I also use oil to smooth my sculptures and remove finger prints. Clay cracks after baking: if your clay is not flexible and easily breaks after baking you are not curing it properly. Your clay should be baked at 275F your oven may be set on this temperature but oven thermometers read incorrectly in a lot of cases. Buy a over thermometer to get a more accurate reading on your temp. Your clay should be baked at least an hour or more depending on how thick it is. It can be baked multiple times at this temperature and will not burn. I know the package states 30 minutes but I have been working with this clay for years the longer it is baked (at the correct temp) the stronger it will be. Your clay no matter how thin when cured correctly should bend without breaking (unless a lot of force is used on thicker pieces) Test baking once you have got the temperature on your oven correct: Roll out your clay and cut 6 pieces of 1 inch long by 1/2 inch wide slices. They should be as thick as a nickle. Number them 1-6 and then stick them all in the oven at the same time, set your timer for an hour. Remove one from the oven every 10 minutes. so you will have 1 piece baked for 10 minutes, 20 minutes, 30 minutes etc... when you have baked the last piece for an hour let them cool off. Then do a bend test with each one. Like what will happen those baked for 10-30 minutes will break when bending and those baked longer wont. This will allow you to see if your oven is getting hot enough. I have attached some pictures of my correctly cured clay being bent. This is how you will know it is cooked correctly. When you are working with your sculptures you can put test clay strips in with it and take them out & do a bend test that way you will be able to gauge if your project is also being baked correctly. Hope these tips help!