DGS-1100-05PDV2

I bought this to extend our network and add a couple of wireless access points without having to rewire any more than was necessary. The APs are power over ethernet (PoE) and there's no power in that part of the suspended ceiling, so a switch that was PoE itself and could pass that power through to whatever's plugged into it was a big help. Installing this switch was as simple as plugging it in. A moment later, the APs were visible on the network and all was well.

Check the manual before buying (or see picture attached). Although it's marketed as 18 Watts max with an 802.3at supply, you cannot connect two class 3 devices, even if they draw less than a combined 18 Watts - and you can't work around this by setting it to class 1/2 either as it'll then likely overload and power off that port if one of them goes over 7 Watts. The Web config portal is also extremely dated and difficult to navigate. Aside from that it's a decent quality switch Be aware when buying a refurbished unit it may not be factory reset and have the previous users passwords locking it.

Good, fanless switch for use in home setup. The software user interface is awful however. For example, time setting only allows a unicast sntp ip address to be entered even though there seems to be the capability to enter a domain - this option appears after an erroneous entry only but the gui then doesn’t accept the entry. The wizard keeps appearing even though I’ve asked it not to rerun the wizard. Locked out several times because of “too many logins” More features than home users would need - POE is the reason I’ve bought it. If you want a slick GUI then you should look at other products but if it’s one time setup then leave then this would be ok.

Flüsterleise und bisher keine Probleme mit dem D-Link DGS-1100.

Only one Poe out works at a time depending on the Poe type that is connected.

Te go el switch para administrar la interconexión de toda la casa que tengo cableada, necesitaba que fuera alimentado por Poe para no hacer ninguna instalación eléctrica en el techo. Mediante un injector Poe+ lo alimento desde otra habitación y se comunica con dos switches más. Personalmente me gusta la forma de administrar estos switch de D-Link, sin ser mi campo es sencillo configurar las Vlan (mi necesidad principal), así como otras funciones que aún no tengo implementadas como SNMP para monitorización, PD Alive para comprobar si un dispositivo conectado a Poe responde o hay que reiniciar su puerto, QoS, etc. Para Poe pasthrough me ofrece después de lo que consume él mismo hasta 18w para alimentar otros dispositivos por dos de sus puertos. Tiene Vlan específica para administración con lo que se añade seguridad y funcionalidad y la verdad muy contento. El precio es el que es, ojalá fueran más asequibles, pero me evita tener un enchufe donde no puedo tenerlo y está funcionando perfectamente. Para una casa lo recomiendo sin dudar

Came with the brackets for rack mounting

Good build. Worked for job it was purchased for.