Question 1

I have had my lights from June and one has stopped working no light but unit heats as if the power is there but lighting not on

Accepted Answer

Exactly the same issue but with 2 of them I sent them back I wasn’t happy with them at all.

Question 2

How much  clear space is required above the fitting to dissipate heat?

Accepted Answer

They’re not hot at all so Very little if any

Question 3

How  to replace? Had them put in last year but one keeps flickering

Accepted Answer

I assume you are not very familiar with doing this sort of thing, but if you have a spare lamp of the same type, then replacing the faulty lamp should be quite simple, providing there is nothing unusual about your particular installation.  Firstly, make sure the mains power is turned off at the main power switch in the premises.  Confirm that the lamps do not come on if you operate their local on/off switch.  Grasp both sides of the old lamp with your fingernails behind the rim and pull down.  (If you don't have strong fingernails, you could use something like a flat screwdriver to allow you to get your fingertips behind the rim.)  You will be pulling down against the pressure of two spring-loaded retaining clips, one on each side of the lamp.  Pulling firmly will free these clips from the hole in the ceiling.  (You may want to tackle this carefully, releasing one side at a time, and using your fingers to stop the spring clip from snapping back sharply.)  The lamp will now be dangling from the ceiling by its electrical supply cable.  A short distance from the lamp (about 10cm) there should be a connector of some sort, and this connector will typically be enclosed in a small insulating plastic box.  Open the box (if there is one) to gain access to the connector itself.  Loosen the two screws that grip the brown and blue wires that come from the lamp, and pull these wires free.  The lamp is now removed!  Compare the new lamp to the old one.  There is a small green 3-position switch on the side of the lamp that sets how warm or cold the light tone will be.  Set the switch on the new lamp to the same position as the old lamp, so that you will get the same lamp tone.  Then installing the new lamp just involves the reverse procedure to removal.  Make sure you have loosened the connector screws sufficiently to allow the new wires to be inserted, then tighten the screws to grip the new wires.  (The wires have little brass ends to make this task easier.)  When inserting the lamp into the hole in the ceiling, you will need to hold the spring clips folded back until they have entered the hole.  If you don't feel comfortable doing any of this yourself, I am sure you will find someone who is familiar with doing such work.

Question 4

I bought six lights in Jan 2023 and in the last few days 4 out of 6 have failed two are very dim and one is flashing replace/refund please

Accepted Answer

We have had no problems with ours. I think your query needs to be directed to the vendor not another customer but I do hope you get this resolved.

ASIN	B08GFPTVWR
Best Sellers Rank	2,212 in Lighting ( See Top 100 in Lighting ) 2 in Bath Recessed Lighting
Brand Name	ALUSSO
Bulb Base	E27
Color Temperature	300040006500 Kelvin
Colour	7w Round White
Control Method	Touch
Controller Type	Push Button
Country Of Origin	China
Customer Reviews	4.3 4.3 out of 5 stars (179)
Efficiency	D
Finish	Painted
Fixture Type	Non Removable
Included Components	Light Panel, LED Lens, Power Cord, Power Driver, Instruction Manual
Indoor Outdoor Usage	Outdoor, Indoor
Installation Type	Semi Flush Mount
Is Assembly Required?	No
Item Dimensions L x W x H	8.5L x 8.5W x 2.9H centimetres
Item Shape	Round
Light Color	Warm White/Neutral White/Cool White
Light Fixture Bulb Replacement Type	Integrated
Light Fixture Form	Recessed
Light Fixture Installation Location	ceiling
Light Output Maximum	600 Lumens
Light Source	LED
Lighting Method	Downlight
Luminous Flux	600 Lumen
Manufacturer	ALUX
Manufacturer Part Number	2995
Manufacturer Warranty Description	3 years warranty.
Material	Aluminium, Polycarbonate
Model Name	2995
Model Number	DL-SQ25-107D3
Mounting Type	Ceiling Mount
Number of Items	6
Number of Lights	6
Other Special Features of the Product	Energy Efficient, Dimmable, Waterproof, Integrated LED, Adjustable Colour Temperature
Power and Plug Description	Corded Electric
Recommended Uses For Product	General lighting for dining room, bedroom and living room
Room Type	Bathroom, Kitchen, Living Room, Bedroom, Dining Room
Set Name	6 Pack
Shade Colour	White
Shade Material	Polycarbonate
Size	IP44, 6 Pack
Specific Uses	Home
Style	Modern
Switch Type	Toggle
Theme	modern
UPC	653854629493
Unit Count	6.0 count
Voltage	230 Volts
Warranty Type	Limited
Water Resistance Level	Waterproof
Wattage	7 watts

ALUSSO 3CCT LED Downlights Ceiling Dimmable 7W IP44 Cutout 67-75MM 6 Pack

Details

Details

Description

Specifications

Common Questions