Hobbyparkfor 1/10 Traxxas Slash 4x4 Upgrade Parts Aluminum Left & Right Steering Blocks Caster Stub Axle Carriers with Ball Bearings Replace 6837X 6832X 1952X Option

It was good, perfect for the back but when I put the front, on my Traxxas stampede the turning blocks on this part did not let the long screw that passes on the bottom, the part that connects with the a-arms So I will probably try to make them fit, but for Now they are with the stocks. so hopefully they read my review do they can make them better, just so they can fit the front

I really like how it is as described. Fits perfect on the Traxxas Rustler 4X4 as well! The only problem is when you get it at first when you are trying to put a couple of the new bearings in the hub carrier’s and stuff parts of it are either too tight or too loose. Hence the bearings would fall out of wouldn’t even go in. Haven’t found a solution for the too loose bearing holders but there’s a super easy solution for the too tight ones... all you need is - I used - 80 grit sandpaper and sand inside where the bearing is to be placed and then transfer to 100-120 grit sandpaper in order to get that real smooth slide in and stay in.

I guess they work, for a period of time at least. The caster blocks required a two Phillips head screws each, which I definitely did not like. The head of the bottom screw on the castor block just popped right off leaving the threaded part inside. during use. I ended up taking the castor block and the bearing holder right off and putting the stock parts back. The caster block and the bearing holder left the steering with a little bit of wobbly Control no matter how tight do you tighten the screws. When switching back to stock plastic parts they seem to hold up adjust as well and give better steering control. If use do you want to upgrade Your caster block and bearing holders in the front I would go with Traxxas certified parts. These look cool but performance definitely suffers.

Slash 4x4 VXL and Rustler 4x4 VXL share most of the same drivetrain and suspension parts. Not sure why I had to drill out the bottom hole of the block with a 1/8 bit to get the a-arm pin to go through but was easy to do and has worked flawlessly for months now. I highly suggest using a drill press as the hole is at a 90-degree angle when the block is sitting on its flat side, go slow. Even the bearings that they came with so far have outlasted the stock Traxxas bearings in the 4x4 Rustler VXL. Would recommend for the mechanically inclined, save big $$$.

Decent kit for the money, screws like to back out, a lot of play In them, gonna be switching back to plastics soon.

I used these on my rustler 4x4 everything fit perfect I used all the stock hardware, except for two screw on each side on the front steering. The fit is a lil sloppy , but a small washer on each side took care of it.

Purchased for my rustler vxl 4x4 and came with everything I needed. The OEM shoulder screws do not work so they provided the screw and shoulder needed. No drilling. No cutting. I recommend loctite. Wheels are slightly more wobbly.

So far so good all holes for and no wobble only did a couple runs so far

No issues installing, all parts fit great, just make sure you use the bushing provided and blue thread locker on the screws, metal screws in metal parts will work their way out without thread locker.I also added a little silicone grade grease between the joints, for extra wear resistance.

Fits Rustler 4x4 vxl perfectly! Loctite is a must! Bolts have a tendency to back off otherwise and loose the bushings. Overall with the buy.

Cheap, quality seems good but screws loosen up easily and quickly. (Steel on aluminum, that is to be expected) Tiny bit too but to fit with my proline gladiator wheel, I had to improvise some spacers

All parts are a bit loose when there all install there's a big loose

Thanks hobbypark for this great upgrade, and i hope you will keep making this light weight, stronge and inexpensive parts for the slash 4x4 and rustler 4x4 vxl, who even own this set of hub, will probably keep buying it, caz is good for racing too.😉Everyone this hub is compatible with rustler 4x4 Vxl too.😉