KS Hardware Double Door Horseshoe Astragal Seal

Took a bit to find some self tapping screws to go through the aluminum threshold but it does what I needed it to do. This keeps bugs out and HVAC in. Helps a little with noise reduction from street also. I just wish I had known what this was called sooner so I didn't spend so much time trying to fill in the gap at the bottom of this double door. I only used 1 at the bottom since I don't see a gap at the top. Saving the 2nd one just in case I have to replace the one I just out in.

I cannot rate because there are no instructions how to install? Guess I'll return it?

Description said top and bottom I only received one

This product was too thick for my project had to return but seemed to be built very well

I've tried everything to fix the gaps in my French doors. This was an easy to install solution to keep everything airtight.

Solid idea, poor execution.First, packaging this product with unusable hardware is unacceptable. The top and bottom cuffs are different heights. The 6 screws that came packaged (3 per cuff) only fit the shorter cuff. I used self-tapping pole-barn screws with a foam washer to compensate.The dimensions on the pictures are hilariously bad. I shouldn't have to decipher a poorly drawn image like that. No width to speak of.That being said, by comparing others' comments, I assumed it would be way too deep, which it was, and planned on customizing it with my dremel.After using my own hardware and cutting the cuff down, I was able to make it functional AND look nice. If only I had a 3D printer....Again, solid idea, very poor execution on the majority of fronts. Unless you are handy, I do not recommend you buy this. Unfortunately, they're aren't many products out there to seal astragals, so we're kinda stuck with an inferior product until demand increases...Edit: measurementsWithout the foam - both pieces, outside to outside, are 2¼" deep and 2⅝" wide (see picture). The insides measure 1 ⅞" x 1 ⅞".The foam itself is ⅜" thick, so be sure to take that into account when you measure.For the profiles, the bottom piece (see picture) is taller at 1 ⅞", and it sits with a 5° slant to compensate for the slant of most sill plates. The top piece is shorter, 1" tall and it's square (no slant, no picture).

Great product so far. They were a little long so I had to trim them. Got self tapping screws for the aluminum bottom plate.

Like others stated. Good product but dies not fit all doors.

Product worked great. Price a bit high but reasonable considering I couldn't find it anywhere

I would not complain about the ridiculous price. As others mentioned, there is no other company that offers the same product for whatever reason (you can actually find twice as expensive item on Amazon) However, there are several points to point out to make your life less surprising when you get this product. Firstly, it consists of 2 "shoes" - top and bottom. It's not a pair for 2 doors. It's a single pair for top (1" high one) and bottom (about 2" high one) Secondly, look at the picture. Took me a second to figure out what's wrong with it. All 6 screws (yes, I did get 6 screws) are of the same size. They match perfectly the lower shoe, but come short (see the picture) for the toll one. I wish they had different screws matching the size of the shoes (by the way, one of the shoes in my case was properly packaged while the second one, I suspect, was a return as it was simply a bulk item with screws at the bottom of the envelope. The shoes are thinner than they should be, in my opinion, as you have to squeeze them difficult to fit. Yet, they do fit, which I am glad for. Finally, it would be super nice to add a matching drill bit for the screws. I was lucky to have it in my place, but it would be nice to have, given how cheap those bits and how expensive they sell the item for. Overall, this thing does the job. I don't know how long it will serve as, like mentioned by the others, it's simply plastic with glued thermoseal inside. The real price should probably be around $7-10 in a local store, but local stores do not sell it. If it lasts 5–10 years, I will be happy. If not, I'll probably think about more permanent solution that this one.

Took them out of the bag removed the old one and replaced with these two in no more than 5 minutes. Nice and snug.

Seems to be the only option for this specific application (sealing draft around astragal of exterior French door). It's overpriced and the quality control is very bad, it was not cut square at all. It does do the job though.

worst product i ever bought on amazon. i doesn’t fit to the door properly. they gave me one screw instaed of 6 screws. just beacuse no body is selling this u guys are robbing people . a cheap plastic product for 90 bucks