Accubrush MX Paint Edger 11 Piece Jumbo kit

Great product for getting the job done quickly. No more messing around trying to cut in with a brush. Easy to set up and use. Perhaps someone may look at making a 2 sided function one in the the future

the roller didnot do a clean job as expected . not the best to load with paint . stick with a paint brush . ps not worth the money

just bought this to help me with redecorating the house. I have never been able to edge a ceiling / wall consistently so this looked like a good idea.This product works well although it is set up more for left hand use if you are using this on a wall > ceiling edge.The roller does not hold to much paint and if you overfill them it tends to drip.Its a bit of a faff to clean as the roller has a hollow core but semi solid ends that are pierced only for a spindle rather that typical roller design of a wide aperture that the roller head fits into.The rollers are product specific so you cannot source replacement rollers elsewhere.You cant use this on a pole, painting high ceilings will be a challenge but there is an upgrade version that supports pole use.That being said once you get used to it is quick and easy to run round the edges and providing you keep the shield between the roller and the other surface clean it works incredibly well. I did a double bedroom wall / ceiling paint in about 20 mins. A huge improvement. Overall 9/10.

This product doesn't really work as promised, had to press down firmly to get it to work, and even then paint got on the edge, meaning it had to be wiped with each pass. A lot of money for something masking tap can do with a little more time

Bought this with the hope that this will save time and effort and get very neat edges. However, we found that the roller doesn't bind against the wall, so you smudge the paint before it actually starts rolling. The claim of 8' is completely inaccurate. The wheels that you have to have against the wall bind and create a line as you roll, thus making you have to keep going over to get it to blend in. This also damaged our newly plastered wall which we were furious about!It's also an absolute pain to clean, as the ridges on the other side are so small it's awkward.Edges also leaked paint through as the tiny brushes get clogged up so fast it splats. We had to wipe of the excess paint several times.You also cannot go right up close to the corners as the plastic protection thing is one side only.If you're reading this, you're honestly better getting masking tape or one of those plastic hand held edges that allow you to paint right up to it with one hand - about £2 from Wilko! And to get close to the corners you might as well get a paint pad!

Did what it said and more. Great product and time saver

The media could not be loaded.  First of all, it’s worth setting expectations. Is this product going to make painting any less boring? Absolutely not. Does it still require attention and care? Of course.This kit does however make life a little bit easier. I’m not a professional painter, and I’d say I’m a better than average-skilled DIY’er having previously worked on the tools for a short stint.My line work when it comes to painting is no short of atrocious. Typically, you don’t get a perfect surface to paint, and plastered walls will almost never leave a perfect 90 degree angle in the corners. Otherwise everyone could make every room look incredible.I’ve tested this product on a feature wall where I’ve painted already, but the line work was poor. First impressions are “this makes it look better than it did”. But in no way does that make it “as good as a pro finish”.I’ve previously used other tools such as paint shields to assist with cutting in. It takes forever and unless super careful, the result is usually still pretty bad.One thing I’d say for this is that it saved me a tonne of time, and made the cutting in passable, not perfect, but easily good enough.Before you go slapping paint on the walls though, definitely worth cleaning the roller (it’s got lots of lint on it which you’ll want rid of before use), and watching a couple of YouTube videos to get some hints, tips and tricks.Overall, the quality of materials included is poor, and you wouldn’t want to rely on this in the long run, but for me, renovating a house and forgetting about paint until the end of time, it’ll do.Massively overpriced, but pays itself back in time if you’re going to be using for a full house.

I bought this, spare 4" rollers, 4" roller tray & roller tray liners & was disappointed. Fails to get closer than it needs even after adjusting I found the gap simply to wide. There is no quick fix to edging, & you better just buy the masking tape, & save some money. Better spend you time masking than spend your money dreaming.

I thought this was a gimmick thing and after the first time I'd go, yeah, they tried and I tried it and so a little money down the drain...It actually works very well. I still taped well and i still will because mistakes happen, but this makes very clean lines even on our derpy bumpy not straight walls. My ceiling is untouched and clean lines!! I'm very impressed, though it has a few things they need to correct. For example, the clip to hold the brush on need to be moved 90 degrees to avoid occaisonally getting paint on it having it drip. somehow make it so you can remove the edger section so you can just roll a bit without it in the way.There will be some minor expense in replacing the little brushes, but i think well worth the benefit of this tool.Also, hope they can simply and lighten it a bit.Be aware you should hand paint into corners before you start as it can get everywhere, but again absolutely worth it once you start rolling an paint a clean line it is great.another tip, rolls in the direction of the wheels to keep them a bit cleaner and avoid them messing up paint. I roll a bit then lift the wheels a bit and go back over - works great.So, a little learning as you get going, but actually a very very handy tool and worth the high price tag, but hopefully they'll lower that.

Mode d'emploi en anglais.Pas de problème pour moi car je suis anglais, mais si vous ne pouvez pas lire l'anglais, vous ne saurez pas comment l'utiliser correctement, mettez de la peinture là où vous ne le voulez pas et portez plainte.Il existe des instructions sur YouTube et je vous suggère de voir si vous pouvez déterminer comment les utiliser. La façon dont vous commencez à peindre est TRÈS importante, comme expliqué. Vous ne pouvez pas simplement le frapper sur le mur contre le bord et commencer à rouler. Si vous pouvez le résoudre, il fait exactement ce qu'il dit.Il existe deux modèles et celui-ci est le moins cher et il est droitier. L'autre a une poignée qui tourne pour que vous puissiez l'utiliser avec l'une ou l'autre main. Celui-ci rend la tâche difficile car vous montez du côté droit d'une porte, en haut et en bas du côté gauche. Vous ne pouvez faire le tour d'un bord du mur au plafond que dans un sens. L'autre modèle, plus cher, vous permet de tourner la poignée pour pouvoir monter des deux côtés de la porte et dans les deux sens autour d'un plafond. Je choisirais le plus cher la prochaine fois, s'il y a une prochaine fois et c'est la question. Combien de fois par an allez-vous l'utiliser et pouvez-vous justifier de payer pour le modèle le plus cher ?

Accubrush MX Jumbo Kit--You need to ensure that you read carefully as how to use and view videos to use it properly. Once you get the knack of it, it does a great job. I personally love it!

What I received was great quality and very usefulThese items will help make you a much more confident amateur painter

Not a good product. Edger leaves wheel marks and scrapes against trim leaving streak marks in paint. Threw it out after 1 use