Features: 1. Dedicated to measuring Resistance, Capacitance, Inductance and Continuity Test, and can Detect Diodes, the maximum display digits reach 1999. 2. Zero Function for Capacitance, Low Battery Symbol Reminder, Auto Prower Off , Data hold. 3. Large LCD screen of our LCR Meter can be flipped for easier viewing of measurement data. Specification: Display : LCD Biggest Display Value : 1999 (3 1/2) Sampling Rate : 3 times per secondD Overrange Display : "1"at the higgest digit Measuring Method : Double integral A/D conversion Instruction for Low Voltage of Battery : showing "- + " Auto Power off and Data Hold function Working temperature: 0℃ to 40℃ Storage temperature: -10℃ to 50℃ Power: a 9V laminated battery(6F22) Environment temperature: 23℃±5℃,Relativehumidity: <75% Capacitance (C): 200pF-2000uF, accuracy up to: ± 2.5%; Inductance (L): 200uH-20H, up to accuracy: ± 2.5%; Resistance (R): 200Ω-20MΩ, accuracy up to: ±0.8%. Accuracy:±(%reading+digits) Wiring length:1.5M Capacitance: Range:200pF;Resolution:0.1pF Range:2nF;Resolution:1pF Range:20nF;Resolution:10pF Range:200nF;Resolution:100pF Range:2uF;Resolution:1nF Range:20uF;Resolution:10nF Range:200uF;Resolution:100nF Range:2000uF;;Resolution;1uF PF=10-12F;nF=10-9F;μF=10-6F;mF=10-3F Resistance： Range:200Ω;Resolution:0.1Ω Range:2KΩ;Resolution:1Ω Range:20KΩ;Resolution:10Ω Range:200KΩ;Resolution:100Ω Range:200MΩ;Resolution:10KΩ Inductance: Range:200uH;Resolution:0.1uH Range:2mH;Resolution:1uH Range:20mH;Resolution:10uH Range:200mH;Resolution:100uH Range:2H;Resolution:1mH Range:20H;Resolution:10mH μH=10-6H ;mH=10-3H Package content : 1*LCR meter 1*pair of crocodile clip 1*9V battery 1*user manual 1*Portable bag
W**S
Good LCR meter for the money
I’ve been using this to build guitar pedals and check all the components before they go on the board. It only comes with a short set of alligator clip leads, but for my needs that has been fine. I have not used it to check inductance yet, but all the other functionality works well. Keep in mind that you can’t use this to check voltages so if you have this on your bench you likely need a second meter if you’re doing anything requiring voltage checks. The auto off function is great so I don’t constantly kill the battery. This does everything it claims to do and has been a good addition to my shop.
J**Y
Does the Job, great value!
Great accuracy, solid feeling to it, helped me sort unlabeled inductors! I can't get the "Zero Adjust" knob to do ANYTHING but its not off by much anyways. E.g. when I touch the leads together I get 0.3 ohm and I should be able to zero that but the adjustment has no effect, manual was of no assistance here. Alligator clip leads it comes with are obnoxiously short, I swapped for a longer set with no measured loss in accuracy.
R**.
Works fine
It is fairly large, but it works fine. Tested capacitors, resistors, and inductors and the results were very close. For general electronics use I would recommend this product.
D**N
I purchased it for indentifying the large array of inductors I have.
This unit works fine for component value indentification when devices are not marked.This is the reason I bought it and use it primarly for a vasy array of inductors I have on hand for design.
A**R
QUICK AND EASY TO USE
Fused inputs would have been a nice touch, but then again, it is not advetized as a CATIV 600 VOLT meter.
R**T
A meter that goes down to the low picofarids!
This is a great meter for the price, measures down in the Microhenries and Picofarids where others do not!
P**O
Works ok.
Needed a 2nd one for a project.
A**R
A very useful tool for the price but.....
but..... I wish the inductance meter had more range.Other than that this little guy is a star in my toolbox!
K**U
正常に動作します。
コンデンサ、抵抗、インダクタの測定 に役立ました。
Trustpilot
1 week ago
1 week ago