EVIL ENERGY Oil Catch Can, 300ml Baffled Catch Can Kit with Breather Filter

Given the price, overall quality is well above average. Kit is very complete with exception that no larger diameter hose, or clamps for larger hose, are supplied ... even though larger fittings can fittings are. Hoses are available through their website or your auto parts store. NOTE ... if your engine is V6 or V8 you will likely require TWO cans, one for each cylinder bank as many/most engines do not merge each cylinder bank vent hose to a single fitting before entering air intake ... the case with my 2023 Nissan Frontier V6 ... plus the two hoses are different diameters (why ??) You could try using a Y fitting to merge the two cylinder bank hoses, but must be absolutely certain you're not creating a back pressure situation doing this. I just installed 2 cans, one for each bank, at this price why not.

Straight forward install, quality is pretty good the bolt for the top incase u don’t wanna vent isn’t the best quality but it does its job with a few wraps of teflon tape so far I’ve had no leakage or issues

On my 2006 zx10r This is decent quality for the price I would recommend!

Good kit overall. Nice quality for the money and great finish. Relatively easy fitment. It would be nice to have longer hose, as the supplied one is a little short for many applications.

Excelente

Thank you it does work

Great and looks good too.

The can appears to be well made and durable. My issue is the instructions are very vague and don't explain a lot. It says to refer to the vehicles owner manual. Also, my kit was missing the middle size fitting. I still haven't been able to install it.

I chose to try this oil catch can even though it is half or a third of the price of brands from other suppliers and was really surprised at the high quality of the parts. Even the hose supplied was a proper fuel hose type. Installation was super easy and everything fit well. I used a bit of silicone grease on the threads of the canister to help stop the binding. The kit did not come with teflon tape for the bars fittings but probably not needed as there are supplied o-rings for the seal at the fittings anyway. I’d recommend the kit

Didn't work on my jeep wrangler and i got engine light

Well so far so good. Relatively easy to install on my Kia Sorrento 2016. I did have to go and buy another 4 foot hose as the location I mounted is on other side of engine from my PCV. I installed it online …so hose from PCV to inlet on canister …outlet hose back into the air intake behind the throttle body on the sorreno. Instructions in box kind of useless as they don’t tell you what to do with the breather. I initially installed it and heard a bit of a whistle on idle. Then thought…that doesn’t make sense to have a breather in a closed system so took it off and replaced it with the plug. Then I saw here in the pictures of the product they essentially say don’t install breather if inline PCV. lol. Would have been nice to have that in the box! Will update and see how it does from here. Also, bracket kind of useless I thought. You will need to buy some hardware likely to mount it. But all in all….looks like good quality.

The inlet and outlet are marked on the opposite side. I plumbed the fresh air going out the "in" side. (the side with mesh) and the dirty air coming in the "out". As for the product its self it seems great and well built. I did haft to fabricate a different bracket, however that was only due to my application

Product came and had clearly been opened possibly a return product? Box had tears and looked like it was taped up by a 2 year old. Did NOT come with pictured baffle material and o rings were incorrect size for the fittings.