Shower Head Holder Handheld Shower Wand Holder Adjustable Shower Head Bracket Shower Wall Mount Holder, Polished Brass/Gold Finish, Drill Free Glue Installation

I had the plastic mount that came with my oxygenics showerhead. I wanted to get a shorter hose, and they are easily available, nice stainless ones, but they don't fit the oxygenics holder, which is too large. All other holders, like this one, are a 'standard' size. Most holders I found have the cradle attached to the shaft at 90-degrees, which severely limits the range of motion and allows moving the showerhead in nonsensical directions. This one is angled, which means the showerhead can be adjusted to point straight or downwards. It has a nice brushed stainless finish. The ball-mount holds firm and moves smoothly. Very nicely made. It can't be tightnened, but seems like it is well made and will stay put and not sag. It is provided with a mastic adhesive, which must be cured for 48 hours. Since the plastic showerwall was not attached to the wall, I found that the adhesive is not enough, so I drilled 2 holes in the corners, and screwed into the wall. Solid. I also applied silicone around the top edge, so no water could get in to loosen the glue. Very happy.

This is SO much better than the suction cup holder that came with my shower head. Omg. Not only will it not fall off and make a loud noise in the middle of the night, but it just feels so solid when using it. It’s also classy, and it adjusts easily, which my other holder did not do. I got two: one for the shower head itself, and another to put near the top of the shower to route the hose for the shower head, so it doesn’t bang against the faucet. Make sure you follow the instructions properly for applying the adhesive. It’s not complicated, but it’s also not your average adhesive. You have plenty of time to adjust the position before letting it set for a couple of days, which I definitely needed to do. It’s completely worth the wait; just use your old holder in the meantime. After the adhesive dries, it’s not difficult to remove excess around the edges. I’ve been using it for a couple of weeks now, and I still feel a sense of satisfaction every time I put the shower head back in the holder, so much that I was inspired to come write this review. I’m so glad I got this thing.

Bought this over a year ago and it’s still holding strong. I’m buying another one for another shower. This thing’s awesome!!!

Overall the quality of this holder is good, seems solid. My problem was with the glue that is supposed to hold this onto my RV shower wall - I glued it and was going to leave it for a couple days, but the glue would never set up enough to keep it on the wall. The seller should provide a faster-setting glue, or possibly a construction adhesive. So, my solution was to drill holes in the base plate and screw it to the wall (as the old one was). My shower wall has wood backing behind it, so I feel the installation is solid. The swivel mechanism in this holder is very stiff, so I have no confidence glue would have ever held it for long. I would also suggest the seller pre-drill holes for those who would rather do it this way. Now that it’s installed, I’m very happy with it. Shower head fits well onto it and the satin nickle finish is very nice.

This is literally the best handle! I love how smooth the movement of the handle is (you have to use the shower head to move it). The glue that comes with it is like literal cement it’s crazy!!! But yes…use your own heavy duty duct tape (tape provided sucked)

Here is the trick. Your mounting surface has to be cleaned with alcohol and make sure is not a porous surface. After you clean the area, Clean again! I use 91% Alcohol. This is my second succesful installation. Mark the area that you just cleaned twice. it has to be dry. add the glue as per instructions and hold it against the wall with the included sticker. they provide two. I only used one. Let it stay untouched for 72hrs. Not 24, not 48, leave it alone 72hours. That glue set rock solid. I am using them on both my bathrooms. Of course do one at a time. if your wall is not solid, meaning plastics of any kind that flex under pressure, chances are this is going to come off. I have a solid non-pourous walls and wow. perfect. One final thought. Make sure the dimensions match your shower heads. measure. I read some complaints that in my opinion were user errors or ignorance. Cant blame the manufacturer for those.

So far, so good held to my wall well against the tiles. We will see how it holds up as time goes on. So far great buy.

This item seams to be very good quality. It is solid metal and very durable. To adhere to the wall, it comes with a 2 part epoxy which is will have a stronger hold. Not difficult to use but can be messy if you’re not careful. I feel a 2 sided adhesive tape would be more than sufficient to support the weight.

High quality product

El pegamento que trae no funciona, solo se mantuvo pegado 3 días y se cayó. El producto como tal se ve de buena calidad pero el pegamento no.

Tien très bien et belle apparence

excellent adhesion to ceramic shower stall,easy to reposition shower head while in wand bracket. metal bracket,not plastic.excellent quality.

Exactly what o ordered