Radians - CEP002-T CEP001-T Tan Custom Molded Earplugs

I am a drummer and currently play in a loud heavy metal band. I also play drums in church and for church functions. I bought this to fabricate my own in-ear monitors to use for live shows and practice. I fabricated the plugs just as the package described(using a water bottle cap between my front teeth to keep my mouth open so the plugs would form correctly) and then put $5 big-lots isolation headphones into my ear canals(not too far, you can't do this wrong or you will hurt yourself permanently) where they would normally fit (while the radians plugs were still wet and pliable). I let them dry for 10 minutes, pulled them out, cut holes where the speakers in the headphones are(it didn't stick to my ears or my headphones), and plugged them into my personal mixer. I practice daily, 1 to 5 hours with these monitors in. They never fall out, the drums sound amazing, and the outside noise is nearly eliminated. I recommend this to all my musician friends as a cheap alternative to going to an ear doctor, getting pro molds made and spending hundreds on a set of headphones that may last as long as the big-lots headphones. This was a great and affordable way to make my own in-ear monitors. I have been using the same plugs now for over a month, I can clean them with rubbing alcohol, my ears don't ache, they are comfortable and like an unnoticeable, awesome addition to my practice routine. I would and have been recommending this to all musicians. I am currently disciplining myself to beat the world records for fastest hands and fastest feet. I'm at 1000 beats per minute with both hands and feet. This is definitely an excellent product to help in my endeavors!!!! I would also like to add that it was my first time doing this, I did one ear at a time and didn't mix the portions until I was ready to put them in each ear. It really does set up in 10 minutes. If I have to do it again, I will use smaller portions for each ear because I was able to make a back up set of plugs with the left overs, but they are a little smaller and probably not as reliable because there's not much material on them. These seem like they will last forever if I take care of them the way that I do now. I can also pull the headphones out of the radians, and replace them if the headphones go bad. Really awesome product!!! After reading some of the other reviews, I would like to add that I am extremely disciplined, I read and follow instructions carefully, and I tend to be a perfectionist or at least very thorough in the things that I do. If you are kind of clumsy, or don't trust your abilities to do this stuff, I wouldn't try to do it without help because you can damage your ears if you do this wrong or push the material too far into your ear canal.-It does say in the directions not to push it into your ear canal. DON'T PUT IT IN YOUR EAR CANAL!!!!! GREAT STUFF!!!!!!!!

It is great product. It was easy to mix and install. Very comfortable fit when done. I inserted an ear bud in the mix after I put it into my ear. A cheap set of ear buds now sounds great. I recommend getting someone else to insert the ear bud in the ear canal so as to better position the ear bud in the center of the canal. I also used it to fit my blue tooth headset in one ear. It is very comfortable and never falls out any more. Works well without the ear buds for shooting situations with my shot gun. I have yet to try it with a long gun. Paul

After much research I went against my better judgement and ordered this. I had read many, many reviews saying that the stuff never sets up. But I had also read some good reviews so I took a chance. Lesson learned. The instructions state that when properly mixed the putty will begin setting up within 10 minutes..... Well, after over an hour I had it dripping down the side of my head. It took quite awhile to get it all out of my ear. Fortunately it had not oozed into my eardrum. It now has been about 30 hours and the lump of this stuff I took out is still has runny as the minute I put it in. I wanted to return this crap but my 30 day window had expired. Fortunately I had purchased it from eCop! Police Supply and when I emailed them they instantly credited my account. Kudos to a top notch vendor!!! They said they had not had this in inventory very long but there was a date code on the box of July 13, 2011. I don't know if that's a sell by date or expiration date or what. I ordered this on December 27th, 2011. My advice to ANYONE wanting to try this stuff is to mix a small ball of this and set it on a plate and time and watch it. If it does not start curing within the allotted time, DO NOT put it in your ears!! You may not be as fortunate as I was in getting it back out! Again, I absolutely recommend eCop! Police Supply as a stand-up vendor!

I tried these a couple times years ago and had disappointing results. After reading a few things and watching videos about "custom" in ear monitors, I am glad I tried these again. I used the kit to make molds for a pair of older Etymotic Research (HF5 I think?) earphones and they came out great. It feels like they have possibly improved the formula. Another important tip for my ear shape was to keep my mouth open during the curing process. That helped a lot. Keep a napkin handy for the inevitable drooling. The HF5 earphones are known to have weak bass response. I get a little less bass than the foam tips and about the same as the triple flange tips. They are more comfortable than either and offer similar or slightly less noise isolation. The foam tips are probably the best for my ears, but they are expensive and hard to take in and out. It also appears the earphones respond better to a headphone amplifier with these "custom" tips. I have the second kit and want to try using it to make tips/molds for a Walkers Game Ears. Giving 4 out of 5 stars because I don't get a perfect seal, which could be my ear shape or technique. But, I would still use foam ear plugs for hearing protection when it was important.

good little kit although it might take more than one attempt to make a good set. I made a set for myself for riding on my motorcycle and one works perfectly, the other probably didn't form right so i get alot of noise in it. Probably no fault of the company, I think I may not have properly filled my ear right while making them. I would like to get another set to try again because I feel that if i get a good seal they are fantastic at keeping excess sound out. update: I tried my original pair again, this time pulling down on the lower part of my ear while inserting them and then giving them a little push to really set them in my ear. I promptly went out on a motorcycle ride and they work wonderfully, no more wind noise while riding! Finally a ride where my ears aren't ringing when i get off the bike. Changed review to 5 stars. Great product.

Die angefertigten Ohrstöpsel halten nur wenig Dezibel auf und das Kunststoff ist auch nicht langlebig. Billige Schaumstoff Stöpsel halten deutlich mehr db auf.

Ordered for husband. He said they were easy to make moulds Loves them. He drives his bike on highway every weekday so needed ear protection. Says they block wind very very well and also sound very very well. He would absolutely recommend this product. Also great price.

First try ended with a half-assed ear piece for my work Police radio. Second attempt made for a near-perfect piece; it took effort to get the cable mounted securely and aimed for proper sound transmission. Looks like I should have enough for another mould if I am careful. Much pricier than a basic earpiece, but it fits perfect, and stays put. If I get three out of this pack, it won't be much pricier than buying three cheapies that would have all worn out by now. Will buy again, and will spread work to coworkers who hate one-size-fits-no-one ear pieces.

This product did not meet my expectations and is of poor Quality and noise reduction and fit very poor. I would not recommend this product