LASFIT H7 LED Bulbs for Hyundai - Tucson - Ioniq Kia-Sedona-Forte5 Lights, Pro-HK5 w/Adapter-Holder-Retainer, Super Bright 6000LM 6000K Cool White, Play N Play Easier Installation(2bulbs)

Well for all you people looking to replace your Halogen headlights with LED headlights, this review might be for you. I bought this set to fit a 2016 Hyundai Tucson Eco. I just was not happy with the Halogen bulbs that came with the vehicle and after installing sylvania Silver Star bulbs in the car and them lasting for about 175 hours, it was time to replace them. The lasfit product peaked my attention as last time i tried installing LED headlights, the adapters either didn't work, we loose, something. This product promises a made for the car adapter and it is said that they are a direct replacement for the OEM halogen bulb. In a nutshell, Kinda.............. here is a truthful, just put them in review. Comes with 2 LED lights and the 2 adapters just as stated. I watched a how to install video on Youtube a couple of times to make sure I had this down. After removing the old headlamps I removed the wires and they came out just like the video. I first worked on the passenger side as that is the easiest to get to. The adapter went in fine. I checked the polarity on the bulb and it fired up, I mounted the bulb and taped up the wires as directed. Everything went well. I moved over to the driver side. Fuse box is in the way and far less room to work. This is where I find out the clips that hold the adapter to the fixture are about 1/32 thick and immediately completely broke off 1 tab and broke its mate and had to super glue it down. After working with it I was able to get the adapter attached (LASFIT, nice adapter but extremely poor quality of design that these tabs are going to break off! ) Mounted the led bulb, attached the plug to the power and up and running with both lights. Try to put on Dust caps. REALLY? I was able to force them on (more on that in a little) but I did see that Laskit makes a cover that would give you 1/2 more clearance on back and still keep everything watertight. Get these !!!!!!!! Now to look at the pattern. Shined the lights on a flat wall, one light was way brighter then the other. Pulled off the dust cover, twisted the bulb and focused it. I did have the correct side down, but the light needed to be turned slightly to get the best pattern. I also noticed that once the bulbs are in the adapters, it really is not a snug fit. The light will rotate rather easy. The OEM dust covers push on the LED Tight and when turning them to lock them, they will turn the bulb, so it is a guessing game as to how much they are going to get turned with the cover. The nice thing now is the cover will keep the bulbs tight in socket and should keep the bulbs from rotating and getting out of focus. So are these lights a direct replacement? I guess I would have to say yes, but with great care. I have not driven the car in the night, so will add to this review after that. I would say be extremely careful with the adapters that are sent. You will easily break a tab. Things do fit. If you get frustrated, walk away as opposed to trying to force the adapters. Lasfit, improve on your adapter ! Wish me luck.ADDITION: I've been driving the car now for about a month and absolutely love the LED Headlights. I see a ton more down the road and I've not been flashed yet for someone thinking I have on my brights. These lights not only shoot down the road with pure white light, but they also illuminate the side which really help with seeing deer on the side of the road. As my review states, a little harder then OEM bulbs, but for the trouble, these things are great for my Tucson Eco. Highly recommended for replacement bulbs.

Wow, these bulbs are BRIGHT! Intense pure white, maintains the factory light pattern and sharp cut-off. These bulbs aren't cheap. However, I tried another less expensive brand with some generic adapters; they didn't lock the bulbs into place and they wobbled up and down in the housings. Not acceptable. These custom-fit adapters hold the bulbs securely. Unfortunately, the tabs on the adapters are rather flimsy and one cracked off. It's being held together with epoxy. The good news is I mentioned it to Lassiter and they’re sending a replacement, so they stand behind their product.Suggestions based on experience: when removing the old bulb, pull on the wiring harness and pull out the little plastic retainer; you're going to want the extra slack. Attach the adapters WITHOUT the bulbs; this way you can feel the opening in the housing and guide it straight in. Take note of the different tab sizes: on the passenger side the 2 large tabs go on top; on the driver's side the 2 small tabs go up. Don't use too much force; they only turn about 1/4" to lock in place. Connect the LEDs outside the housing to make sure you have the polarity right. If they don't light upturn the plug around. Take the factory socket and slip it in so it's buried along the side of the adapter and out of the way. Wet the O-rings around the base of the bulb with a little spit and push straight into the adapter. Make sure you have the bulbs indexed so the LEDs are facing out to the sides.

So...the adapters that come with the lights are pretty weak (see pic). Contacted Lasfit and they sent 2 new adapters. The install was easy but ended up cutting wires to old light socket and crimping on connectors and shrink tubing the connections. Then just plug LEDs in. Functionality I'd say they are pretty dang bright! The OEM round covers for the light access I highly recommend keeping them off due to heat and circulation issues. 10min with car running and lights on caused error codes on display. Removing covers solved code issue in seconds...they block circulation! Lasfit also has the fog lights (see pic) that fit great with no issue....Best way to install is removing skid plate under front of car (10mm bolts). I'll update this review in a month.

This kit fit the 2022 Hyundai Ioniq Hybrid SE perfectly. Personally I think the LED bulb adapter is sturdy and well built. I had no problems with broken tabs when installing these adapters. Maybe the plastic adapters get a little brittle when in freezing weather conditions. The adapters where easy to lock into place. The LED bulbs just push into place into the adapters. Make sure the cable coming out of the bulb are facing down. There’s lots of room for the wires to tuck right around the fan. The 2022 Ioniq comes with the deep headlight caps. You just have to remove the plastic mesh cover inside that holds the moisture absorption packet. Once done the cap will twist back on with no problem. No need to purchase a deeper headlight cap. This is probably the best low beam LED headlight solution for my car at the moment. The adapters fit the car and bulb perfectly like it was factory made. The only problem was the space Hyundai left to access the headlight bulb.I did have one LED bulb light up dimmer than the other LED bulb, but the seller replaced that bulb quickly. The seller is trustworthy.

It doesn’t matter how bright they are if you can’t install them because the flimsy, garbage adapter they give you breaks when you try to install it. First one broke 3/4 of the clips on the adapter - second one I was super careful with the adapter and at no point did it feel locked in. It felt more like the adapter was stuck, like it wasn’t designed to fit. The previous adapter I’ve used with LED’s, and the adapter that comes with the Ioniq both feel better installing than this one. For $100, I expected better.With that said, the light is bright. Last photo compares the Lasfit led to the Hikari’s latest model led

The media could not be loaded.  Installed these lights a couple days ago and thought they were great. They’re bright and the beam pattern matches the original pattern. Right away there were no codes. Now I’m getting glitches on my dash saying the bulb is out when it’s infact not out. Which is annoying to see.

Après avoir essayé plusieurs feux pour mon Tucson 2020 j'en ai enfin trouvé un qui en vaut la peine, de très bonne qualité, la lumière est bien blanche, tout comme celle que je cherchais et le plus important c'est qu'elle ne me donne plus de code erreur .

I like how bright the headlights are, I really dislike how they're supposed to be error free but the error keeps coming up. Overall good for brightness, not good for coding issues

The media could not be loaded.  Very straightforward to install, taking out the stock halogens was harder than installing the new LEDs since the halogens were in so tight. The space you get to work with when installing the LEDs was small but definitely doable. I was a little skeptical about prying out the connectors from the original retainer, but you just need to push it down, hard on the space with the little bump (you will see there is a straight part and a part where there's a little bump is). The dust cover went back on easily and the cut off line was smooth. I went for a night drive into some country roads, unlit highways and back alleys. I can definitely say it's way brighter, and the car looks very premium. It is a very noticeable difference, highly recommend it. One little thing is, getting used to the white light rather than the yellowish light the halogens give out.

Easily installed on my 2020 Hyundai Tucson - just follow video installations. BRIGHT - Nice upgrade from OEM halogen bulbs, no more yellow lights! No errors showing up so far as of July 31, 2023. Highly recommended!