UTG 1"/2PCs Medium Profile Airgun Rings w/Stop Pin , Black

I used these to mount a 1" tube BSA 2X20 Edge Series Pistol Scope on my Browning 800 Express - 0.220 Caliber spring piston air pistol. This gun has a significant amount of recoil, but these work great in keeping the scope from slipping on the dovetail mounting rail, and they were a perfect for the amount of height clearance I needed. They did need re-tightening after every 20 shots or so, but a bit of Locktite on each screw solved that problem.The mounts are light weight (important since, with the scope, the pistol is almost 4.5 pounds), but extremely well made and sturdy. UTG also includes with the mounts the three different size Allen wrenches you need and one replacement screw in each size (set-screw, clamp screw and rail-mount screw). I consider this a definite "value added" perk since a lost screw would not be easily replaced otherwise.At less than 11 bucks, these mounts are a bargain and hold up against some pretty vicious recoil action. I'm very happy with them. Happy air-gunning and, as always, shoot safe.

I have a Hammers 3-9X40AO on a Crossman Vantage NP. The scope came with a 1 piece mount that was hard to keep tightened. The screws would loosen up after about 20 shots and after numerous attempts at tightening, the heads eventually rounded off on the tiny mounting screws. Blue thread lock on the stop pin did not help. The scope itself is an excellent scope. The 1 piece mount that came with it is not as good quality as the scope. The picture shows the differences in the mounting screws sizes of the 1 piece mount compared to the UTG 2 piece mount. The mounting screw on the left is the UTG, the one on the right the 1 piece mount that came with the scope. Both mounts have the stop pin. The UTG mounts are very good quality and they have remained tight. I can consistently drive a thumb tack at 30 feet using the UTG mounts. High quality scope mounts are a must when shooting a magnum air rifle. The UTG mounts have proven to be an excellent quality product and has made all the difference for accuracy on my Vantage NP. I am very satisfied with the UTG 2 piece mounts and recommend them highly for use on a magnum air rifle. Outstanding quality. Exceeded my expectations for helping keep the scope from moving, thus improving accuracy to the point where my Crossman Vantage NP has turned into a tack driver. The UTG mounts has made a tremendous improvement in accuracy. Exactly what I was looking for from a scope mount.

Bought these as a replacement for the originals that came with the Quest. The originals just wouldn't hold. The Accushots hold like crazy. After a few shots(50) I re-tightened all the screws and zeroed it in on 25' air rifle targets at a distance of 30 feet. The last 25 shots were all in the black except for 1 flier with an average group of less than 3/4's of an inch center to center. All while standing up with the rifle resting on a towel on a not to steady cardboard box. The original CenterPoint scope performed fine and has held it's zero for 50 shots on these mounts. Crosman Destroyer 7.9 grain pellets were used exclusively. The reason I tried these rings was for the scope stop in the form of a pin that mates to the hole in the Quest and the 2 rail screws per clamp. Good product at a good price.

So initially i was impressed with how these felt, the included tools and extra screws. Everything seems to be decent quality and fit especially for the price. Tried installing them and one locking lug was machined smaller than the other,.not happy! After some time and initial return call,.i messed around with them and realized the lug on that ring had been installed backwards compared to the other scope ring. After flipping it around it locked up great and very happy so far with these. Little more attention to detail during assembly and would be great. Put these on a Marlin model 60 btw. See how they last but for the cost they seem pretty good.

These are not my first set of UTG rings. I've had good service in the past as well. This set is for my mild springer airgun to mount a $200 2-7X32 Hawke. The fit and finish is as nice as any / many bigger name rings i've had on bigger firearms. I may try their one piece mount on my next airgun. This set is still perfect and zeroed after 2500 rounds and several trips in my pickup truck. I'm actually using the locking pin that protrudes below the rear ring. Some keyboard warriors say you don't need it but I gave it a try and there's been no movement at all. I can't say that for a number of scopes I've mounted.

Solid rings for a good price.

For the price, these are great. I mounted a Vortex Crossfire II 2-7x32 Rimfire on a 2000’s Marlin model 60SS receiver dovetail. They are tightened to spec, 35 in-lbs on the dovetail clamps,15 in-lbs on the scope clamps. I used blue thread locker on every screw and bolt. Nothing sheared or stripped, and these scope rings are a perfect fit. They match the finish on the scope perfectly. I clamped the rifle barrel in a bench vise between a couple pine wood blocks to level the receiver, and once the gun was level, I set the scope in the rings and leveled it, and carefully tightened the rings down so the scope didn’t wander. I will use a laser boresight after dark tonight to get the scope “on paper” at 50 yards. Don’t let the air rifle tag throw you off, these are perfectly cromulent 1” medium scope rings for a 3/8” dovetail.

These are secure rings for my scope & they are well made & don't require over tightening the screws to keep the scope in place. I used these for a Nikon Prostaff Target 40mm scope for my air rifle & they work great. After getting the rifle zeroed in & using it for about 2 months I had an accident with my upstairs door & the wind. I thought I had the door latched & was temporarily resting my rifle against the door when the wind blew the door open & knocked the rifle with scope to the floor. I was immediately concerned with damage to the rifle & scope or knocking the scope out of site. I checked rifle & it was fine than checked scope for zero & it was OK. The fall had not moved the scope or caused any damage to the optics & the rings held the scope & all was well. So much for that resting place. Quality rings.

These are excellent quality and finish. Came with extra screws, pin and allen keys. They fit well and are completely padded on the inside of the rings helping to not damage or distort the scope. Very pleased with these rings... 5 stars all the way.

UTG is always my first choice.

Love these mounts. Very well made and beefy looking.They have a set screw to hold them securely onto the rail. Price is excellent and they work wonderfully holding my scope securely without ever moving. I highly recommend these mounts.

A very solid set of rings, and good value.

Je l'est est installé sur une vieille 22LR C-I-L et c'est excellent je recommande l'article pour les carabines 22LR qui n'ont pas de base dessus qui ont seulement des grooves sur l'action 👌