1.2GPM Faucet Replacement Part Insert Filter, Restrictor Aerator, 16.5mm/0.65Inch, 4 Pack

Once you determine the correct size (not an easy task) these work very well.

Many many thanks to this seller kaileyouxiangongsi!!! I think you may be the only place in the U.S. (maybe world) that sells this specific aerator at an excellent price: "1.5GPM Faucet Replacement Part Insert Filter, Restrictor Aerator, 18.5mm/0.72Inch" I'm so happy that you can sell these 4-packs with the installation tool for that price... don't change it PLEASE!In my experience, ALL plumbing items are usually difficult to find. The below is somewhat lengthy instructions but for a beginner to plumber it should be most helpful.I had NO CLUE what my faucet model number was when starting this quest for a replacement aerator let alone the aerator part number, I only knew that Moen was the manufacturer by reading the barely legible print on the bottom front.Side Note: For some annoying reason, faucets don't indicate the model... unless it's in some hidden spot that is only visible by removal from the sink or by some miracle or accident the parts list is still under your sink!So to find the model and part number, I went to www.moen.com --> Bathroom --> Sink then under the Filters area click Show Discontinued Products; just in case your faucet is no longer manufactured. From here you can narrow it down further by additional characteristics such as the number of holes. To determine the number of holes, you must crawl under the sink with a flashlight or better yet a smart phone to see or take a photo as I've done to show my faucet has 3 holes noted by the 3 red arrows. It helps narrow down the products a lot if you know (or think you might) the Specific Finish. In my case it is Brushed Nickel so I chose that and narrowed it down from over 1,000 three hole faucets to 185. From here, I scrolled down and found my faucet model by comparing the photos to my faucet.So after all that I discovered my faucet is called the "Eva Brushed nickel two-handle high arc bathroom faucet" Model: 6410BN". Back on the Moen website, after you click on your faucet picture, scroll down to Installation and Support (or click Support in the menu panel BELOW the faucet pic) and there you'll see Replacement Parts and you will see a list which includes the aerator part number 137401. For this faucet there is also an aerator with part number 180158 but when I searched this number on the web & Amazon it's dimensions didn't match up with my Equipment Original Manufacturer (EOM) aerator.I then searched Amazon for "moen 137401 aerator" and found really only 2 decent results. The one offered by another seller didn't give me enough certainty it would fit because it had a rubber washer on top and didn't show the dimensions. The seller kaileyouxiangongsi had all dimensions down to fractions of millimeters. So from this point, I wanted to be 99% sure it was the correct size. I pulled out a metric rule and carefully measured the height and diameter of my EOM aerator and found it matched the "Color" 4PCS-18.5mm/0.72Inch. As you can see in my side-by-side aerator pic, it looks slightly different than the EOM but it wasn't enough a difference to affect the fit.Note: The height is shown in one of the 6 picsHint: Sometimes on Amazon "color" is used for different sized products rather than actual colorSo, I added it to my cart and paid for it. I paid for a 4-pack of aerators and tool for $9.95 (with free Prime shipping & returns) from seller kaileyouxiangongsi rather than the $10.58 for the single aerator offered by the other seller. Moen was asking for $14.10 plus shipping a single aerator and tool! Both of these might fit but again the dimensions aren't shown and they really don't look the same as the EOM because of the rubber washer on the top of the aerator. This faucet's aerator does NOT have or need a rubber washer between the spigot and the aerator.The 4-pack and tool arrived quickly via UPS and I installed it with very little difficulty. Turned the water on and no leaks; faucet is now just like new!

We had an aerator that clogged after a few years even though we have water softeners. We tried multiple things to get the aerator out but could not find any documentation on how to remove and replace it. After some more extensive research, we finally decided to give this a try. The tool easily removed the aerator and the new one fit perfectly. We also realized that these aerators have SIGNIFICANTLY more flow than the ones from the factory. We don't have crazy pressure at home, but this faucet now really has great flow. We have to warn guests and remind our kids to be careful otherwise, they will wind up getting sprayed. This was a great purchase!

This replacement screwed in perfectly just like the original aerator. The flow is incredible, very fast which is what we were looking for as the original unit was extremely restricted. If you're looking to free up your flow this is the way to go. And since it's a four pack we're basically set for the next 15 years or so.

My aerator became plugged and while trying to clean it, it broke. I looked everywhere for one from the manufacturer but for some reason it was difficult to find? So looking on Amazon I found some that resembled it but kept looking for a slightly greater flow rate. This product said it was 1.8 GPM which was greater than the 1.2 GPM that was broken. This aerator did not look exactly like my old one (mine had what they call a coin slot for removal). This product showed clear measurements which matched mine so I bought this kit with their tool.So Long story short. It went in easily worked like a charm and my faucet now has excellent flow!For the record I have a Pfister Ladera LF-048-LR faucet. Hope this helps someone.P.S. When the box came it said the aerator was only 1.2 GPM on it, but it has a strong flow and seems greater to me.

This product does not work as advertised. The actual, measured flow rate, is closer to 1.8 GPM and not the 1.2GPM advertised. After installing this, the water flow rate was so fast that the drain could not drain it away fast enough and water splashes everywhere.The part does not have the internal black gasket that the OEM part and name brand replacement both have under the screen (as can be seen in the attached photo: this part is on the left (purple), OEM in the middle (pinkish) and name brand replace my on the right (green)). The aerator is also smaller than the OEM aerator.The application key (wrench) is very small and really thin. It distorts and bends during application and removal of the aerator. It was challenging to use and took several attempts. I’ve added a photo comparing this wrench to the branded wrench. The blue wrench is this item. The yellow wrench is the branded wrench.I returned this aerator and bought the branded replacement. For a few dollars more, I am not wasting water every time I turn on the faucet.

I wanted an aerator with flow rate control for my bathroom faucet to limit the risk of overflow. This one filled a 500-ml water bottle in about 2.5 seconds, that’s more than 3 GPM, more than doubling the advertised flow rate. It otherwise fit my faucet and was easy to install.

Do what they are designed to do, great value and suspect I will never need to use the remaining 3!