ROVATE Shower Panel Tower System 304 Stainless Steel, Shower Panel System with Adjustable Rainfall Shower Head, 6 Body Massage Jets and 5 Functions Handheld, Brushed Surface

I was not happy when I first installed the unit. Water pressure was terrible. Contacted Rovate for a fix. They told me there is a restrictor in the show vale body. Found the restrictor and removed it. Shower in Awesome! Very happy!

I can't believe it took me this long to get 1. If you're thinking of buying this don't wait get it!!! You will not believe how nice this tower works. And my plumber told me it was the easiest thing to install....water pressure is great even when you angle it. Fits to your height and rust free. Great value for the money.

What a pia to install!! WAIT don't stop reading, it's made to go on a flat wall, we mounted it in a corner, in place of an old one. Needless to say EVERYTHING was different, except the 1/2" npt fittings, thankfully. This is no reflection on the shower. Okay, entertaining installation aside, it works pretty good. The instructions were adequate for a flat wall application, as others have said, the hoses could be a couple inches longer, and mine came with 90 degree elbows. So, I made new brackets to compensate for the corner, picked up two longer hoses, and did a lot of measuring and fitting, again, no reflection on the shower. Many have commented on the material thickness,I wouldn't call it 'flimsy', tho it is certainly lighter than my old unit, it is strong enough, in my opinion, to hold water and I try not to remove it too often. On my brackets, it seems sturdy enough for it's purpose and the stainless is much better than the painted surface on the old one. The water pressure thru the head, and handheld, is equal to my old one, being off grid and only maintaining 60psi, it's what it is. The body heads are hopeless with our pressure. Some have said the shower head doesn't stay up, I didn't see any issue and I was being careful not to over tighten the joint. A last point, the temp handle seems to have some lag, possibly because of our pressure? so small adjustments until you hit your temp might be in order. Also, changing outlets will first push out the cold water in the lines, a bit thrilling the first time it happens. Again, strictly a first impression, but I'm optimistic and happy with the SS materials.

This looks and feels like a super high end shower. You can adjust the top rain shower head up higher for taller people. The hand held is great. The front sprayers are great too. The unit itself is metal but the handles, hand held sprayer and front sprayers look good but are plastic. If you are not careful or if you are rough I could see them breaking. They have not broken for us. If you want everything stainless steel you will pay thousands of dollars. This is fantastic for the price and worth every penny.

Nice shower and fast shipping but had to return due to it was too high for my shower

This is an attractive unit, but there are some things that I think they could do to make it much better, for little additional cost. 1. The 12" STRAIGHT water hoses used to connect to the supply lines are useless if you have water pipes coming straight out of the wall, not on a 90 degree angle. I planned the water outlets to match the installation of this unit, so the water was connected near the bottom, because the suggested location (above the water connections in the unit) would have kinked the hose BADLY just to get the hoses to the connections. The 90 degree turn inside the 2.5" deep body caused them to fold flat so no water could come out. I had to MAKE two 12" (or so) hoses from PEX connectors, with one end a 90 degree swivel elbow and the other end straight. I used a heavy-duty hand-shower hose with PEX crimp rings. This allowed me to connect to my water supply lines without kinking them. (See image for sample of what I made - note image is NOT the same length as what I made... much longer) The thing is, because of the way these mount, the hose needs to be FLEXIBLE, because as the unit slides down onto the mounting brackets, the hose has to bend behind the panel almost two inches. If the company simply included a set of these, possibly a couple sets (different lengths), it would be MUCH nicer. I'm not sure you can even BUY them. 2. The instructions were VERY vague as to the best place to position the water lines as well. 3. It would be nice to be able to easily increase the water volume in the unit. We have plenty of pressure in our home, but the body jets and rain shower don't have nearly enough volume for my preference (Maybe this is possible, as I'm awaiting a reply from the company on this, will edit later if so). 4. The rivets on the back should be coated with rubber or something because in the process of installing these units, you need to put them on and off a few times, just to get them "right" with all the water line issues, and the rivets scratch the surface of your shower. 5. Lastly, they could redesign the mounting system a bit, in my opinion. It would be much better if the wall mount that you screw into the wall had a bar that extended to the sides of the unit, with threaded ends, and you simply put a stainless steel screw through a hole from the outside, into the mount on each side, at the top and bottom mount. Then you don't have to SLIDE it down the wall to mount it. Easy design mod. I may actually fasion one of these myself, so that I can remove it more easily... (See image) Once installed, this unit is good, just not great, as I'd hoped it would be, for the above reasons.

Easy to install and works great

This nicely looking, short, 46.8 inch system is virtually non-connectable in the way the manufacturer advertise it. Here is why: All action of advertised connections happens in the-so-called "compartment C". This compartment is to small and too crowded to get thing connected without ordeal. There is no single photo or video how provided 12" non-kinked connectors are connected to wall connectors and how they fit in this small in height "Compartment C". This compartment has one bypass between two jets, must fit bracket between two water lines and must have space for 180 deg turn of stiff non-kinked line. One user in these thread said that provided 12" hoses are useless. It is true. But company wo sell it also knows it. If I am wrong- OK, but manufacturer then must show how to connect in compartment C; two stiff hoses got connection are preshaped into Compartment C.. To make it work, one has to inject two long flex lines somewhere through long middle compartment. Basically you buy the panel for 200$ and then pay $700 for installation or spent several days installing it yourself. Main obstacle- short&small lowest section (aka Compartment C) and unadequate 1/2 f-f hoses provided.

Very pleased so far. The unit arrived well packaged and protected. The unit seems well manufactured for the price and comes with some of the tools necessary for assembly including little white gloves! Some extra brackets and other pieces are included which is nice. Assembly was relatively straightforward. I did tighten all the hose clamps as suggested. I had to reroute one of the water supply lines for my installation but this may be unique to my set up. Once installed the water pressure seems very good. It is possible to run two of the three shower sources at once by rotating the selection knob between the two source indents. The pressure is obviously reduced. We will have to see how long it lasts. My experience with other manufacturers is about 7 or 8 yearsI however, I would recommend the unit

Great product for smaller shower. Arrived as planned, easy to install and work as expected. Thabks

Sleek looking, easy install, works great

Love this shower piece. Had my bathroom renovated and thought I might not like the shower head but it was the total opposite. I love this shower head. Lots of pressure, lots of water and a beautiful addition to my new bathroom.

Shipping was very fast. Bought this to replace another shower column that started to leak after 10 years (not this brand). It fit well over existing wide fittings. Column is stainless steel, fittings and plumbing look to be good quality. Shower head and wand are chrome coloured plastic, a bit disappointing. This unit has great spray and lots of water pressure. Very happy with purchase.