ADAM Audio T10S Studio Subwoofer for recording, mixing and mastering, Studio Quality Sound (Single)

Sound quality is amazing and worth every penny, I decided to get a subwoofer due to missing lows from my monitors and preventing loud exposure just to hear the lows from my studio monitors, so I decided to get the T10s and it sound so much better in every aspect. If you’re considering buying this subwoofer I’d definitely recommend.

Excellent complement for Adan Monitor speakers

In a 65m² space, I used only the T5V speakers to listen to music, play guitar, and sing, but the volume and bass were lacking. After purchasing the T10S and upgrading them, the resolution and volume improved, making listening, playing, and singing much more enjoyable. I'm extremely satisfied with the results of the T5V and T10S combination. If you own T5V or T7V speakers, I highly recommend the T10S.

Great sub works great with my t5s. I have it filter 80hz and below to help out the smaller monitors. Auto powers off when not receiving audio signal. There can be a second or two of audio loss while powering up from its sleep mode. Shouldn't effect you except when you first turn on your system.

I bought this for my studio in my room. It works perfectly! Currently, I have a Scarlett 2i2 and I send the output to the subwoofer and then from the subwoofer to my right and left monitors. Overall, looks great with the actual diaphragm facing downward. It's light enough to be portable but it could be hard for some. Pretty easy to use and fits right under my desk perfectly. I definitely think it was worth the price!

This is a great, well-built sub that sounds fantastically good and accurate in my home studio system. BUT, I tried to log into the ADAM website to extend the warranty from 2 to 5 years. The site would not send a confirmation email to allow me to log in. After sending several emails to ADAM support in Germany about this issue, I go not replies, and my login still fails. So, I'm deducting one star for poor ADAM support. P.S. Three (week) days after my last complaining email to ADAM support, they finally emailed me to say my login was confirmed. I signed in and extended my warranty. I still love this sub!

I have been using a pair of Adam Audio T7V's and have loved the sound and accuracy. I have a home studio and have taken great care in setting up the equilateral triangle set up and have no real room interuption. I am closing in on finishing a project that I wanted to be the best product possible. My mixes with no sub have proven to be great in whatever system or circumstances I've played them. I finally broke down and purchased the corresponding T10S sub. I figured that it would be the perfect compliment. For whatever reason, Adam Audio chose to only include 2 fixed crossover points (80 and 120 hz - same as my ancient and cheap Yamaha sub I use for special effects in my B system). Now, its on me for not noticing that. I have a couple inexpensive Presonu's 8" subs in my B audio/home theater upstairs. I use them to compliment my older Tannoy monitors I have put to use up there. They have a variable crossover so it never dawned on me that Adam Audio would make such an error in judgement as to set only 2 crossover points (the lowest 80hz) when the T7V goes down to 39hz! What little more it would have cost to give us the flexibility to set it properly would have been worth the cost. What the change did was even make my favorite artists songs sound hollow. I calibrated the system as they describe and the set up has my sub right in line with my monitors. All is set up perfectly. While having lunch and mulling over my purchasing error, I decided to try setting the cross over to "Bypass" taking out the faulty crossover (fixed) setting. Immediately the T7V's came back to life and those cherished songs I use to calibrate my head are back. To Adam Audio I say I'm very disappointed in that decision. Now I have a sub that cost me something in the way of $'s where the cross over doesnt even relieve my monitors as they should because the cross over is far to high. You're better than that. I will not be able to recommend the use of these subs to any of the nice studio owners that I sent to Adam Audio for their monitors. Unfortunate. Very Unfortunate. It hurts to even write this. Next question for me is do I move one of my Presonus subs down to my studio because they chose the proper controls flexibility or do I just continue to using the sub as a "compliment" to my monitoring system without using the cross over??

Pairs great with the adam audio t5-t7 series monitors. i do highly recommend you implement a foot pedal of some kind to cut off the sub *when you dont want to upset your neighbors.* they make cheap pedals but the one I use with a 3ft jack is the boss FS-5l for ON/OFF control.

PC→DACプリアンプ→D3VをXLR-TRSケーブルでバランス接続していましたが、もう少し迫力ある低音を鳴らしたかったので追加購入。 T10Sは同社のTシリーズモニター向けに作られてますが、入出力が共にXLRなのでアンプとD3Vの間に挟むことでバランス接続を維持して使用できます。 ハイエンドゲーミングPC環境(1000W電源、CPU、GPUの合計TDP500W)の為ノイズ対策でバランス接続必須なんですがこれができるウーファー自体選択肢が殆ど無く、本モデル以下の価格帯では見つけられませんでした。 10インチクラスのサブウーファーを使うの自体初めてなので比較しようもないですが、D3Vが60%くらいのボリュームノブで合わせて、T10Sは30%くらいのボリュームでも過剰なくらいパワーある低音が鳴ります。 正直D3Vにはオーバースペックな感はありますがやはり体に響く締まった低音が出るとQOL上がります。大満足です。

Lovely subwoofer! The issue is that the downward pointing sub can be problematic unless you live somewhere where you can afford to send crazy vibrations through the building. I unfortunately had to return mine in exchange for a more traditional sub.

Excelentísimo sub, el rendimiento que te da por el precio que tiene, es buenísimo (y si lo agarras en descuento, ni se diga). Tenía las T7V de Adam Audio, y la diferencia al agregarle el T10S es notable AL INSTANTE. SUPER IMPORTANTE: Es totalmente imprescindible que leas el manual, y veas el video de Adam Audio sobre cómo acomodar y calibrar tanto el sub como tus monitores (sin importar la marca), para que puedas lograr obtener un sonido lo más balanceado posible, y así obtener los mejores resultados en tu trabajo. Incluso recomendaría ver el video (y otros sobre el tema) antes de comprarlo, para ver si es buena idea comprarlo, o si primero debes trabajar en corregir/mejorar algo en tu espacio de trabajo. Por último, recomiendo también conseguir un switch de pedal para poder activar y desactivar el sub, es bastante útil para usar como referencia, o incluso si quieres trabajar de noche y no quieres molestar otras personas. Yo conseguí uno Fender por bonito y no muy grande jaja, pero cualquiera sirve.

Brilliant

Los graves que le hacían falta a mi estudio.