Pneumatic Rivet Gun Hydraulic Air Riveter Tool Labor Saving Rivet Riveting Nut Nail Insert Hand Tool Set, 1/4-inch 3/16-inch 5/32-inch 1/8-inch 3/32-inch Nosepieces

This thing has plenty of power. Very happy with my purchase. I would buy one again if I needed one.

I definitely recommend it. for the amount of time I used it worked better than i expected. sometimes you need to give it more than one pull but its better than doing it by hand. I do recommend getting a swivel connector and not using the one that comes with it.

this comes with two fittings, black/silver. the silver has the standard ASE length thread but the stem has a taper to it. ASE threaded hose fittings do not taper. the seller told me to send it back and find one with ASE threaded hose connection that will work. Well that wasn't helpful. what i propose to do, is to turn the ASE hose connection a bit to produce a slight taper and dope the threads with teflon to air seal that fitting and get a longer seat on the thread. note that the black (steel i think) has about 1/4 inch length to it, and it also has an O ring. i suppose i could cut a silver the same length and place an O ring on it, but the longer length may be there for a reason.

I needed this rivet gun tor some 3/16" rivets that I just wasn't strong enough to pull together with a manual rivet tool. The unit arrived, but I only saw the nose piece in the gun which was way too big, and the nose piece in the plastic bag which was way too small. I had my return filled out when I discovered the other three nose pieces threaded into the base of the gun. Passing this along for anyone else that may be looking for these extra accessories. Haven't tried using the gun yet. Giving it a 5 till I have a chance to use it.

Nice rivet gun! I have used about half a dozen different ones over the years , and I'd have to say that this one seems like the smoothest and has the strongest pull out of all I've used! I've only had it a few months and maybe have only put 50 or so rivets through it. Steel and aluminum. I'll try to post a review in about 6months and a couple hundred rivet pulls later!

Good rivet gun for DIY'r and small projects. Wouldn't trust its build quality if you're riveting professionally on critical parts.

0 star review. Product unable to do the job it was built for. ... The unit I bought had to be defective. Looked great didn't work. I purchased way ahead of the job so I missed the return window.

Works well, and can handle larger rivets. Just what I needed. Not too sure about the longevity but only time will tell

j`ai travailler une cloture en paneau de metal galvanisée et poper environ 400 rivest avec plasir

What a piece of crap, couldn't get it to work.

Easy to use, fast and effortless. Used to repair my aluminum canoe, which only took seconds to do the riveting. 👍

good value and works great

I used this riveter on a bus conversion, Pulled over 150 "3/16" rivets on the first time I used it with no problems at all.