CorepadSkatez Pro Mouse Feet Replacement for Logitech, Razer, and Roccat (Microsoft Habu, White)

My G9x was showing its age, and I decided to take it apart for a good cleaning. That requires taking off the feet on the bottom, attached with adhesive. Simple enough, right? Well, it should have been if I didn't mess it up. One of the feet came off easily enough, but the other tore and split between the actual sticky portion still stuck to the bottom of the mouse and the part that's supposed to slide on your desk/mousepad/cat. Oh well, the feet were getting worn anyway.Cue this item. The material is from 3M, and fit is perfect. It'll slot right into the recess for the original feet perfectly, with no gaps to speak of. Once installed properly, they are nice and flat and doesn't cause any balance issues. Just make sure that the feet aren't hanging up on the sides and are fully in the recess, as I mentioned before, fitment is very tight.Comes in 2 sets, including a piece for the larger, "comfort" grip. Only thing I would have changed is the color. Not sure why white was chosen, considering that it's going to be on the bottom of a mouse and constantly rubbing against your mousepad and whatever happens to be on your mousepad. Seems like it would get dirty and ugly fairly fast, but that remains to be seen. And besides, it's on the bottom of your mouse anyway.Overall, thrilled that there is still support for G9x users (even if Logitech decided to ditch the series), and even more thrilled by the fact that I found it on Amazon!

THIS IS AN INCOMPLETE PRODUCT! The center ring around your naga's sensor is NOT included!!!See COMPLETE product here: Razer Naga Mouse Feet Tried to contact support regarding the incomplete product and the only phone number they have is a local line out of the country. So If you want to actually talk to them on the phone, prepare for some MASSIVE long distance charges! Sent them an e-mail a week ago now, still no response(corepad support, not Amazon).Incomplete product + No existing customer service = HORRIBLE product.DO NOT BUY!!!!

First, and foremost, I am very lazy. I usually do not take the time and effort to review products..... however! I was originally put off and skeptical of this product when I read the only other <at the time> review. None the less, it sounded like just what I needed to rejuvenate my old mouse - which I cannot live without, and (sadly) is not manufactured anymore. I received product super fast, and installation was a breeze. I (as the instructions suggest) removed my old mouse 'feet' and placed the new ones in their place. The fit was perfect! My mouse now glides over my mouse pad like a puck on a air hockey table! Tracking is still perfect, and it fits in, and charges, just fine in the cradle. If anyone is thinking of getting these to bring back your old HID friend, don't hesitate!

I couldn't find any replacement feet on here on amazon for my R.A.T. 7 so I ordered a "sheet". Works great after you cut them out. Like the review says above, make your cuts wisely so you have some left for next go round. Only thing I didn't like was it said "sheet", which made me think sheet o paper size. Boy my imagination ran away from me on that one LOL. I was thinking jeez, I'll never have to buy feet for my mouse or any other for that matter. Got enough left for 2 more sets maybe,as long as my next are on target. Description should be more accurate and have dimensions on there.

For:  Razer Abyssus Optical PC Gaming Mouse Excellent product. I purchased my mouse in March 2012 and after 6+ years the pads were gone. I thought I would have to purchase another one at $50 to $100. For a fraction of the cost, I replaced the pads and my mouse is back in action like new. It glides across the mouse pad with zero resistance. Easy to apply and my kit came with a set of two. If your mouse still works great and just needs some pads I highly recommend this product.

I received 4 left rear skatez and 0 right rear skatez on 2 independent orders.The quality of the product is rather good if they could just put the right things in the bag.I might try getting the whole sheet and cutting them out myself since i can't seem the get the proper pieces,

got these for my g5. looked like they fit until I tried to apply them.The skates where either to big or to small. had to use a razor blade to make the fit because I had already removed the old ones.and the worst thing I them it snagging on my new razer goliathus mouse pad.

As a previous reviewer mentioned the sheet is about the size of a baseball card, it measured roughly 10x7 cm (3.9x2.8 in). The material is fairly easy to work with and depending on the mouse there should be enough material for 2-5 replacements total.However the issue is that many mouse manufacturers (Logitech MX, 518 and MK550 in this case) have been indenting the area where the Teflon sits. This helps to keep the Teflon from coming loose, and then a slightly thicker Teflon is used to make up for the increased depth. This meant that when the mouse feet were removed as instructed and replaced, the new Teflon from this sheet was flush with the mounts, and because of this was not any better than the worn out Teflon.This issue was fixed by reattaching the original feet and installing much larger feet over the originals. Its not ideal because they may come loose more easily, and due to the larger cuts there will be fewer replacements from a sheet. However it does work for now and I'll update if there any issues with the feet staying.

je sais pas a quoi ca sert... J’ai du me tromper a l achat. bref je le retourne

Bad glide and over priced.

Cette feuille de téflon , ( fait penser à de la céramique souple ) ,se découpe assez bien au ciseau, et a un adhésifs double-face très très efficace. Côté glisse , j’ai collé quatre minis patins de cette feuille sur les patins d’origine de ma souris Logitech M525, et je l’utilise directement sur mon bureau en bois, (pas de tapis), et il y a effectivement une petite amélioration.

Ottimo... La base è molto dura e conferisce una scorrevolezza ottima; non c'è paragone con i vecchi piedi consumati (2 anni di vita con un'ora o un'ora e mezza di utilizzo al giorno di media).

Facile à installer : découpage + collage sur les anciens emplacements d'origine. Plutôt résistant et glisse OK et ne se décolle pas une fois installés !!Esay to install: cut + sticking on former mouse pads. Quite resisting & glide OK and doesn't move once installed!!