Orgrimmar 2 Pcs 6.5" Plastic Car Speaker Spacers Adapter Black Mounting Spacer Adaptor Ring for Toyota/Crown/Reiz/BYD F3

The speaker rings on my toyotoa were broken and wouldn"t support the new speakers. These rings fit perfectlyy, the mounting holes matched up, and the new speakers mounted into the rings like a glove!

- Needed something - quick - as a Adapter to fill out the OEM Bose mounting plate which are in the front doors of my 2003 C5 Corvette - long story short - the passenger side window frame lift has a issue & needs to be replaced - since I have the door cover off - decided to upgrade the front door speakers - the Metra frame adapter is only good if your going to replace the entire amp assembly - which I'm not about to do - thus - you can't just remove the OEM Bose speakers - which at this point are 30 years old with new ones - the tweeter / midrange is a simple swap - the mid/bass speaker is a whole other issue - thus - once you remove the mid/bass your left with a odd not completely standard 7" opening in which you can simply drop in either 6.25 or 6.5 speaker - you need a adapter - which no makes at this point - thus - these rings - once the three mount triangle points are cut away - I used a Dremel tool & drop in & you can then mount either 6.25's - which I am or with a wee bit of trimming - 6.5's - NOTE - I used a liberal amount of Permatex Red High Temp Sealant/Gasket silicone seal to glue the brackets in - they line up perfectly - you may want to come up with a alternative mounting method - but - I went the Silicone route as the speakers I bought are not crazy big & by the time the Silicone deuterates to the point it'll need to be re-done - I'll be worm food & Corvette will either be under going a full restore - with another owner - or ??? - anyway - these brackets are nice & solid & were easy to work with for what I needed them for -

I purchase two pairs to change out some non functional OEM speakers in one case and add additional speakers in the other case, one pair was for a Toyota Hilux 4x4 and the mounting holes aligned perfectly. The pair for the Toyota Auris needed slight adjustments to the mounting holes to make them align. All in All these are decent mounts, sturdy and allowed the speakers to be fastened securely to them.Easy to install if aligned other wise slight mods needed. Would buy again.

Had to drill a hole for the speaker wire so the back of the speaker where the plug is could have access with the wiring harness on the front side of the door panel, but this was easy and took less than a minute. but otherwise these fit excellently in my 2016 RAV4 hybrid

will work wellggttoyyyu

Fits on front door panel on my 2000 Corolla. Allowed me to install a non shallow depth speaker easily.

Does not fit Nissan Sentra 2014 even though i saw in the reviews had to mod it but was not waiting to find alternative i put the old factory speaker line up one of the holes then drilled the other 2 in.

Needed these to install some 6.5x coaxs in my my son's 2003 matrix. Super easy to install no issues on the front and it It worked perfect. The rears however didn't line up quite right but we ended up bolting directly to the door so it was a non issue. More of me not doing my homework on the rear doors😂