Mixed Material PLA Filament 1.75mm +/- 0.03mm, 1kg Spool (2.2LBS) 3D Printer Filament, Marble PLA

ERYONE Filament PLA+, 1.75 mm +/- 0.03 mm, PLA Plus 3D Printer Filament blue, is amazing colour. Just what was needed.

wow ive only had this filament a few days and the quality of the finished parts are awesome. the colour i went for was purple glitter effect love purple and it didn't disappoint. looks way better than silks as docent show the z seams. i printed a mini dragon for my mum and a Samsung j3 phone case for me x 2 as the 1st ones first layer didn't go down so well mu fault due to not cleaning the bed first. came out so smooth looking and shiny flecks of silver glitter bits. the glitter is very fine so its not anything that would clog your hot ends. i also broke it in with my new microswiss hot end on my ender 3 pro at 210c bed 60c ill be buying the rest of the colours soon :)

I really like this product. I'm enjoying its quality, the way the spool is rolled, and the printing experience. The build adhesion on the stock Ender 3 V2 "carborundum" plate is great, and the filament itself is partly transparent, giving a cool look to prints when either done at a higher quality, or a lower quality. Anywhere in between is fairly opaque, so keep that in mind.The problem I faced with this is, while the spool is wound excellenty, there is rather sever twisting in it that I cannot untangle easily. This means that I'm going to have to babysit my next few prints and be ready to pause the print if it snags. And it definitely will snag. It's almost as if it's been braided in there, and it has caused a Gordian Knot of sorts.The filament is a bit "sticky" as well. The additives that have been put in has cause the filament to stick to itself, and you can hear when the Extruder pulls a new length out. It's not severe, by any means, and it helps prevent the spool coming loose when removing from the printer to be locked and stored, however it adheres like nothing else to my nozzle, and my nozzle went from being near brand new (it's been used plenty with many different filaments) to being literally covered in red. I've had a few blobs come because of this, and neither heated nor cooled, I cannot remove the thin film that has accumulated on the nozzle. Thankfully, the extruded material seems to want to stick to my build plate and the already printed material better than the nozzle residue.I would've rated higher, if only the spool wasn't tangled, in an otherwise perfectly wound spool. My prints are turning out excellent.

This is good looking PLA for a stone finish model, or just to make a model that doesn't look plastic. It's very decent PLA firstly, with good bed & level adhesion, but it's the flecked pale grey matt finish that makes it stand out. It is a bit brittle, so don't try to print thin parts or walls, but it's no worse than other PLA in that regard. I don't think I've seen it string at all barring thin threads, but I think the best nozzle temperature for layer adhesion is around 200-210 degrees.

Brilliant looks amazingprints well every one seems to want oneglitter isn't a stand out cant see it from distance but it does look qualitywill defo get more colours

I rarely leave reviews, only doing so when a product has significantly exceeded or completely failed to meet my expectations, and i'm afraid to say, that this review is due to the latter. This, in itself is a real shame, as the filament itself looks stunning! The few prints i have managed to complete have come up pretty good; layer adhesion was good, the prints stuck to the bed well, there was very little stringing, I experienced no curling and the sparkle really helps to hide the layer lines.However... The product i received fell well short on the most critical aspect, dimensional accuracy, which was so far outside operational parameters that it resulted in almost a dozen jams before i finally accepted that i would never see the end of the roll. At worst, i measured a diameter of 1.98mm, which is way outside the advertised +/- 0.05mm.I run all metal E3D Direct Drive Hotend's, and I've run kilo's of PLA and PETG through em, The sum of the filament related issues I've experienced previously has been dwarfed by this one roll of Filament. I have only ever seen one other roll as bad (in terms of dimensional accuracy), and that was some extremely cheap, white label, generic brand, PLA that was imported from China, via a well known eCommerce site.Admittedly, I may have just had a bad batch, and had i got round to using this roll within the returns window then i would have just exchanged it and hoped for better results with the replacement. Sadly this was not the case, and the remainder of the roll has gone to that great landfill in the sky and i won't be willing to chance another roll in the future - I actually have another roll of the blue sparkle, that i purchased at the same time as the silver but have yet to try it out.... if i have a more positive experience with that roll i'll update this review but, even best case, this would boil down to poor quality control on Eryone's part, as the filament i received should have never left the factory.As i say, a real shame, as other than the dimensional accuracy i'd find it hard to criticise.

Started to use eryone pla more since I had one pack purchased for a project I had a commission for. Printed well. So this is my next batch. I am spray painting the parts so the colour is of little importance for this batch. It's Warhammer stuff.Would buy again.

I used this filament on various models, printed on a Bambu X1 Carbon; it adhered great and was nice and smooth. No jamming, or spaghetti! However, it is a much darker red than pictured, and whilst it does have some sparkle, it's not as obvious as other filaments I have used.

Ottimo.

Très bonne impression sur Ender 3 V2, bonne adhérence au plateau impression à 205°C sur plateau à 55°C.

Bra toleranser. Utskrifterna blir väldigt bra med denna tråd. Och faktiskt, över förväntan hållbara. Har sett många rekommendera eryone och jag kan nu se lite varför folk tycker deras tråd är bra.

Surprisingly, using this filament, I noticed less / no stringing.

Un des meilleurs filament que j'ai utilisé, et se conserve très bien à l'air libre pendant des mois.Par contre, j'ai remarqué une forte différence d'expansion du filament en sortie de buse en fonction de la couleur.Le noir matte ne subit aucune expansion alors que le blanc brillant passe du simple au double...