Center Console Armrest Pad Covers-Car Arm Rest Seat Box Leather Protector Fit for Honda Civic 2016-2020(Black with Black Line)

Overall super happy with the quality and finished look of this cover. It took me two hours to install but it was worth it. Tips: -You should remove the pieces from the car so you can install these covers for best fit. To remove the two side pieces, just pull towards you. To remove the center piece, open the arm rest, slide it up and you will see two Phillips screws you need to remove, then just pull the center piece off. -I ended up using gorilla fabric spray glue, it made the process easier (make sure you use the spray in a well ventilated area!! And wear a mask). I tried the tape first but it was annoying and time consuming! Also make sure to learn how to use the spray: for large areas - spray the glue on both the piece and fabric and immediately put the cover on and align the cover to where you want it, and then press the cover down onto the piece. For edges - spray the product and let it sit for 15-20 seconds or more, then press the cover edge down. For edges/small areas, if you use the spray and immediately lay the cover on it, it won’t stick unless you wait around 20 seconds. -Do some test fits on how the cover will go over the pieces before you use any glue or tape! You want to make sure you know how the cover will go so you can put it on the first try once it has glue/tape. -You will need to trim pieces of the cover in order to install it, you will need to cutout slots for the clips on the underside of the cover. Make sure to use some sharp scissors for best experience! Be patient and make sure to test fit and do your cuts on the fabric before using any glue/tape! Seriously, you will thank yourself for doing the prep work! In my opinion, this is 10x better than the generic arm rest covers that do not fit properly since this actually looks like it came installed from factory!

The product itself is a great quality. It looks nice, it fits well. The stitching looks like it will hold up under initial review. The problem I have with this product is the installation. The double-sided tape works fantastic. There are a couple of videos out there on YouTube of how to install this. BE WARNED..... They don’t necessarily work and it’s not as easy as it looks in the video. Tucking the edges and excess material is a real pain to get it to look right. In my opinion it needs trimming. I took it to an auto upholstery shop and for 100 bucks installed it by replacing the old cloth and the old padding and putting this kit in. So in the end this kit cost me $130, installed. A pretty decent value in my mind because it came out great it looks fantastic. I’m pretty handy but Im no upholsterer. Overall happy with the product ....just a real pain in the butt for the install. My installer did have to do some trimming. Otherwise the clips will not fit when you reinstall The three pieces to the console.

It doesn't fit perfectly. You will need to do a little bit of trimming, but the quality of the leather is really nice. Gives the car a more premium feel. It took me 30 minutes to do the center console and then the side ones. It took another hour and a half, but well worth it. I used a staple gun to keep it all in place and keep the leather tight. It does come with adhesive. I use it as a guide I put it right on the fabric of the armrest and and line the leather up.

Installation does take several hours. Fitment isn’t perfect but for the price it looks really good. Much better than the stock fabric and which fades and stains easily. It takes a lot of time to get everything to line up correctly and you will have to remove the panels to install. If you are looking for a quick solution, this isn’t it.. but if you take the time, it’s worth it. Also the fabric tape works surprisingly well. I got the matching door armrest covers and it makes the car look a lot better. The red stitching adds character. Overall I’m satisfied.

Quality is good. But overall: This thing took me almost 3 hours to do and even though You be careful , patience while ur doing it, at the wnd it won't fit for your honda civic. Then you realize side pieces blocking it to go all the way its place. Then you are gonna start cutting sides to make more space for clips but you'll see that you have alredy ruined it and unfortunately you can't return it. Then you will get angry and rip it off and put console back as it is. There is no way it fits normal unless super professional person does it. I would say don't waste your money and most importantly your time and effort. I don't usually write a comment on my purchases but i wanted to share my experience with this product and maybe i will help some people not waste their energy and time.

I did the install myself. Y’all, 🥴 I see a lot of complaining about the install and like, working on cars isn’t easy. I set asside 2 hours and a half hours for the project because I’m not very good with things like this. Never dealt with upolstry in my whole life 🤷🏻‍♀️ Once I got the hang of it, it was not that bad. The adhesive stuck like it should. The leather or faux leather pulled taunt. And she came out pretty damn good for the fact I’ve never done upolstry. The how to video saves lives. Also some common sense goes a long way. Anyway, lol my center console looks great! I have not worried about spills now for a minute!! Very happy with my purchase, it’s not perfect. BUT I did it myself. Also be sure to make small cuts to the leather as you go, and don’t unstick all the adhesive until you’re ready to put the leather on. Thank you