LEATHERMAN, FREE P4 Multitool with Magnetic Locking, One Size Hand Accessible Tools and Premium Nylon Sheath and Pocket Clip, Made in the USA

I have collected and used a lot of Leatherman Tools over the last 10 years or so, and the Free P4 easily holds its own--and in my experience surpasses--Leatherman's golden standard; the Wave. The ability to open everything one-handed on this tool is not just a gimmick. You can tell there was a lot of engineering and effort put into the design of this tool. From the use of magnets to keep the implements closed, to the contouring of the "nubs" at the base of the tools that you "roll" your thumb over to deploy them. This is not one-hand opening that requires your tool to be worn in, some clever trick/manipulation of the tool, or dexterous hands; it is intuitive and easy to use, which means it is actually useful and saves a lot of time, especially when you find your other hand being occupied during a task! With respect to the toolset, I think it is just about perfect. I know some people would prefer that this had Leatherman's flat-bit driver, but the P4 includes a dedicated Philips head driver, as well as multiple flatheads. Personally, I prefer the dedicated drivers because they are significantly more robust and offer more reach than the flat-bits. I also think this fits the "spirit" of the tool, wherein every implement is just one hand away. At the point you are carrying a spare bit kit and having to swap them out, the tool has become two-handed, and Leatherman already has plenty of other "two-handed" tools to choose from. All in all, the Free P4 is an excellent tool for a wide-variety of tasks, and well worth the money. For an EDC it carries surprisingly well with the pocket-clip (which is very nice) despite being a full-size multitool. Furthermore, I have no doubts of its durability (perhaps only surpassed by the Super Tool and Surge) even in a hard-use environment. Unless one-hand opening is of zero interest to you, you can't go wrong with the P4!

I had always used fairly inexpensive multi tools. My thought was, why pay so much for a Leatherman? Well, my old Gerber just wasn't reliable anymore, I couldn't trust it to lock the blade, and the scissors were always sub par. I needed a new Multi-Tool, and after binge watching season 8 of Alone, I noticed Clay Hayes was using this Leatherman Free P4. I was intrigued, because you can open every tool with one hand. The hinges move freely, and are not friction fit, which is a departure for Leatherman. Clay used the Free P4 (he has an entire YouTube review) for everything, including skinning and processing an entire deer, creating traps, gill nets, wood carving, you name it. This Free P4 did it all, with no damage to the tool, no loosening of the fittings, no issues. Now, I usually don't buy products based on endorsements, but surviving 72 days in the harsh wilderness with this as your primary tool is certainly a win for Clay and Leatherman. Clay loves the Free P4, and I can see why. Upon unboxing the P4, I instantly felt that this is the best Leatherman design, not only for its innovative hinges, but for overall comfort and functionality as well. The handle panels are smooth, the gripping edges are rounded, and you can really exert great pressure using the pliers, without cutting into your hands. In my opinion, the Free P4 is superior to the Wave if you are an outdoorsman. I don't need a bit driver, I am not a tradesman, and I often find myself holding the object I need to work with in one hand. The Free P4 allows me to reach into my pocket (excellent pocket clip on the P4 BTW), deploy the tool I need, and get to work. I highly recommend the Free P4. Yes, it is pricey. Is it worth it? YES!

I'll be upfront and say this purchase was highly influenced by "Made in the USA". This criteria being limited to select products. I was so impressed with the price and features of the T4, I decided to treat myself to the P4. I'll start with my first impressions, which wasn't very good. I was shipped an open box special. This surprised me since I ordered a NEW product and paid list price. I'm not sure if that's a Leatherman quality issue or a failure on the retailer. Either way, I was not shipped a product that I could feasibly gift to my son. That was disappointing. Aside from the freshly used product I was shipped, everything seemed to be in working order. I've seen so many knockoff multitools. So many to choose from. I had no idea where to start. I'm glad I choose a standard trusted brand. As a Test Engineer, I have little time to eff around buying inferior products. I'm impressed with the solid tool performance of the P4. 5 star rating for the solid multitool that it is. However... I did watch many reviews on multitools. I've never owned one before. This one being my first, I tried to do research. I agree with most of the positives. The mag lock is a great feature. I can understand the downside of metal shavings being an issue, but given the trade-off and the fact this tool is going to get dirty regardless, I'll take the mags. The styling is...okay. I favor rustic over gentleman appeal. That said, the scales are okay. Consistent with the Free product line. I commend Leatherman for a product series branding done so well. I do wish there were other options on the scales. Plain, solid and simple would be my choice. I like my tools looking like tools. That to me is a work art. I've seen mod kits for the scales. A shame I'd have drop another $35+ just to make my multitool look plain. I'm an anti-flashy customer. Still, the consistent brand and heavy duty pocket clip...it's growing on me. I'm becoming a fan. Bang for the buck, the T4 sets a baseline that's hard to beat. I took a chance splurging for a P4 to use as my EDC at work. The quality says it's probably worth it, but still felt like a big jump in price to pay. For me. I think bang for the buck varies on the individual. T4 is great! P4 is okay. Now for the bad. There were some negatives in the reviews. I agree with some. In particular the toolset. Everyone criticizes the awe. I agree. It's design is dumb. Having the option for a mini flathead is great. Having it stuck on the end of a sharp edged tool is just dumb. If an awe was needed, I'll want a sharp tip to use it. In my mind, the awe is a failed tool. The ruler is too short to be of any use to anyone. The place for any "ruler" would be on the body of the tool itself. Put ruler markings on the scale! THAT would have been an obvious choice. Nobody wants to deploy a tool to take a quick measurement. It has a slightly wider flathead/scraper which seems redundant with the box opener tool on the other side. What's the point of that tool? The wire stripper should be on the scissors or the pliers. If using a stripper, you usually do that in combination with cutting wire. So put it on the same tool. Very dumb to switch deploying different tools when doing a related job. I'll address some of the complaints with the cutters on the piers. This is where the folks doing the reviews are dumb. The cutters are designed for performing two types of cuts. It's not a stripper! Although arguably that would have been a better choice. It would have been smart to include two sets of blades with the multitool. Those who want two types of wire cutters on a single blade, and those who would want a cutter paired with a wire stripper. They make the blades swappable. A shame it's not a feature left for the customer to choose. So I agree with the bad reviews on the wire cutters. They're not the best. But I disagree on why they're bad. Leatherman has a great design, but they defeatured that good design when they sold the tool. I'll call that a marketing failure. Thank you Leatherman for such a great multitool. I'm happy with my purchase. I wish mine wasn't shipped as an open box (possibly refurbished?). Overall I'm happy. I'm hoping to purchase the K4 next.

I have owned a Leatherman WAVE plus for the 5 plus years, I found it difficult to open and I also didn't like the fact that you had to open the tool to access the rest of the tools. I decided to make an upgrade and I was debating between the ARC and the FREE P4. Thought they are very similar in architecture they both have a different set of tools. On my wave I used the serrated blade at least 10 times per day to break down boxes, it's the tool I use the most. The ARC was missing the serrated blade. The FREE P4 was missing the tiny screwdriver and the bit set, however I never used these two tools on my WAVE, I usually have a ample set of tools so I will seldom be in a situation were a I need a screwdriver or a tiny Phillips and I wont have it a few steps away. I LOVE the fact that the FREE P4 opens with one hand ( the wave was super stiff and It needed to be opened with two hands or with force.) On the WAVE, I like how the serrated edged and the knife on the left position on opposite sides so they can be open with my right thumb. So I swapped the saw for the serrated blade and VOILA... I now have the two blades I use the most accessible with my right hand. If I need the saw (very rarely) or the scissors I will use my left hand to open them which is totally fine. My only wishlist for this tool is that it had spring loaded pliers. I find that super useful on the BOLSTER and the WINGMAN. I wish leatherman would implement this feature on their most expensive tools. It was hard for me to justify a $250 price for the ARC, I went with the FREE P4 and I am totally OK. I am not a Knife SNOB so the magna cut can just wait... This tool feels like cutting edge technology and it feels great in your hand, at a price point of $100 to $120 it's a great value.

Free P4 is awesome with its ability to open up and use the needle nose pliers regular pliers and 2 wire cutters. The only other multitool design I am aware of with one handed open for pliers is the Gerber Multi-Plier 600 which uses a whipping downward motion like a baton. This one-handed opening motion is more like a butterfly knife like another reviewer said. To close you can use your thumb while holding the other handle with one hand and push it pass the locking mechanism designed to lock in place while you are using the Pliers. The opening is buttery smooth due to it being well oiled and satisfying to open. Probably will function as a fidget toy for most multitool enthusiast. Quick access with thumb for rightys is the standard blade and saw tooth. Can probably get away with opening serrated blade with your middle finger but only if you want to lose it. (I tried not recommended the spring action is pretty good) Quick access for leftys is serrated and scissors. You can also one hand access everything in between as well with push up feature on the side with the tools you want and put the ones you don't want to use back down. Realistically if you weren't ambidextrous you won't be able to access 2 tools with a single hand either the serrated knife and scissors for rightys and for leftys you won't be able to get the plain edge knife and the saw blade. Unlocking tool feature works on either face of the tool so you can unlock the took with both sides. Things I wish this tool has is an option for belt clip which I enjoy with the leatherman wave and the option to switch out bits which is also available for the leatherman wave. I believe this tool will have potential to have a belt clip as you can remove the lanyard clip and possibly replace it with a belt clip however nothing is officially offered by leatherman at the time this review was written. Sheathe made in china. Does not include a lanyard even though it includes a lanyard hole. Tool made in USA Portland,OR.

Summary: The P4 is a great set of pliers with a unique and satisfying opening system. The externally, and easily deployable, tools are fantastic, but they're limited in range compared to comparable Leatherman tools with a more diverse bit selection. Also, the decision to make all tools external means the ergonomics aren't as comfortable for prolonged use of those tools. Disappointingly, although the P4 is longer, the main straight and serrated blades are actually shorter and skimpier than comparable models. While this is a great tool, there are serious design compromises that should guide whether it's the tool for you. *Update* As the end of April, Leatherman is now putting a pocket clip in each new Free P4 (see the end of my review for my complaint about this). If you bought one that doesn't have a pocket clip, you can email Leatherman and they'll send you pocket clip for free. Full Review: The new Free P4 sits between the traditional Wave and Charge TTi in terms of price, but since it's closer to the Charge, I'm going to compare it to that model. I have an older model Charge (without the replaceable wire cutter bits), but I believe this review holds up with the new one. Ergonomics closed: The P4 is about a 1cm longer than the Charge, maybe 2mms thinner. Leatherman's official stat sheets say that the P4 is lighter, but this didn't check out on my scale: my charge is 8.5 oz, and the P4 is 8.7oz. Both feel good in the hand, but I'd say the Charge feels a little nicer. The Charge feels a little more rounded in the hand than the P4. Also, although the P4 scale design has an interesting new aesthetic, it's not as grippy as the old Charge. Pliers: The P4's are great. Absolutely great. The whole magnetic opening thing--which I thought looked gimmicky--is legitimately pretty awesome. A gentle push of the fingertips pushes the handles apart, and from there they swing freely into an open position. Once the handles are fully rotated, they "lock" into place with a satisfying click, and they will stay in pliers-mode until you put a good bit of pressure on them. This is an amazing contrast to the Charge which can be too stiff or too loose, depending on how much you use it. Unlike the Charge, the P4 is not as prone to pinching when using the pliers. Because of where Leatherman positioned the blade-bumps for the Charge (that is: the side closest to the pivot), it was very each to get your palm caught between them, which has led to many a blood blister for me. The P4 swaps the blade swells to the opposite end of the handles, giving more room between the handles. Also, the handles are longer, which means you get can more leverage when you need it. The new pliers on the P4 are wider and beefier. These are simply fantastic pliers. Blades and deployment: The biggest con in my book of the P4 are the pretty crappy blades. Although they're coming out of a longer handle, the P4 blades are shorter and have less depth. In particular, the main cutting blade (which is a wharncliffe style instead of the Charge's droppoint) is really puny. Also, because all the P4's tools are external, when the blades are deployed your ring and pinkie finger will be digging into the "empty" sides of the P4, rather than the Charge's covered sides. If you're going to be using the P4 blades for any extended period of time, you're almost certainly going to want gloves, whereas I've used the Charge blades for quite a while without getting any hotspots. Tools: The Charge has a great file, but terrible scissors. The P4 has great scissors, but a terrible file. The Charge comes with a pocket clip or lanyard loop, the P4 only has a (awful) lanyard loop. The Charge is a true multitool that can equip dozens of different driver bits. The P4 has a limited selection of flat and phillips screwdrivers. The Charge has to be opened to access most of it's tools, and it relies on a fingernail destroying grab system. The P4 allows you to deploy any tool while the unit is open with basically just a roll of the thumb. The Charge has an enscribed ruler, the "ruler" on the P4 is a laughable joke. This is a hard one to call because it really comes down to use. If you never find yourself needing your multitool to drive a hex screw, you probably won't miss the Charge's versatility. I will say this, I think Leatherman sat down and said, "What tools do we think most people will use *most* of the time," and they did a great job with that process. I think it about this way: the everyday person needs a good pair of scissors more than they need a nice diamond file or a hex driver. So, you really need to think about your use case before you buy one or the other (personally, I'm keeping both). The one-handed convenience of the P4 is its indisputable killer feature, but I do think some people will regret its limited scope of available tools. I will say that the I think the P4 will become my new camping/hiking multi-tool. It's not like I find myself in the woods thinking, "My god, where is my T6 Torx wrench bit!!!" that often; but the Charge will almost certainly remain my toolbox multi-tool. As a final aside, the Charge comes with a lanyard loop and pocket clip. The P4 only comes with a lanyard loop, and it's awful. I've heard they're going to sell the pocket clip later, but they *really* should have included it.

I like the design having all tools accessible from the outside of the handle, with thumb instead of nail to deploy these tools. I also like the magnetic point with just enough holding power to keep the handle together while very easy to open them up and swing the handle open to use the plier. Some folks complain about the blade being shorter than one on wave or charge, but I find them being adequate and very usable. The scissors design is rather ingenious. The spring bar serves also as a widget to allow finger deployment of the scissors, yet keep the edges in closed position, without locking the tool, so if you accidentally opened the scissors you can just close it easily. Once you open the scissors handle, the tool gets locked in place. And this is the best scissors tool I found on many multi tools, with generous amount of blade as well as a powerful yet comfortable handle. The blade/tool locking system are shared and works well, and seems more secure than the inline lock. Like several other reviewers indicated, the file on this tool is rather small which limits its usefulness. For me I could live without the saw and replace with a full sized file. Well again, being a multi tool there is always compromises, for the conveniences it offers. You cannot use them and expect the tool functions like the single purpose tool. For that I give this new leatherman design a five star! May I suggest to round the tools back/shaft a bit more so it is more bare hand friendly? It is a bit sharp on the outside.

Many other reviews have provided details on the function, but I just wanted to echo the reviews that give this tool high ratings. I've been carrying one for a month, and it's the best multi-tool I've ever owned, and I've owned dozens of brands and styles. The Leatherman has always been a favorite brand, and I carried one for more than a decade. But this is the most useful and well-designed tool of the bunch. It's a little heavier than some, but it packs a good level of utility into that size and weight. It's worth the money to purchase a well-designed tool. Yes, it's a bit pricey, but I've found it so worth the value, I purchased a back-up. The Leatherman Free P4 is now my daily carry, and I love it.

⭐️⭐️⭐️⭐️⭐️ Excellent seller — perfect Leatherman P4! Bought my Leatherman P4 from Jæger Atelier and couldn’t be happier. The tool arrived brand new in box, exactly as described, with a proper invoice included. Everything was packaged securely and delivery was very quick. The P4 itself is flawless — smooth, sturdy, and top-quality as expected from Leatherman. Great communication and a trustworthy seller. Highly recommended!

Got the crappy wire cutter like Arc. The rest is good.

The one handed ease of use was one reason ,why I purchased this multi tool. The other reason was the quality and great reputation leatherman have.The best multi tool,is the one which when something crops up.Use Grab the tool you have and hook in and it does the job perfectly, with ease.This does.