• 1. Four modes: Single(Dividual), Sequential, Step and Salvo 2. One transmitter can control 144 cues to the maximum, you can choose how many receivers to be used. The receiver is programmable. 3. Frequency&Transmitting Rang: 433MHz, 1000M 4. Two types of power supply: Internal power or External power 5. Included in the system: One EMB12 receiver, one ETX2000-12 transmitter, one external power wire jumpers, one carry case and one user's manual. ›See more product details.

1.12 cue Remote control system, include one receiver, one remote transmitter, one external battery wire jumper, one case. 2. The system has four working modes. Single mode, Sequential mode, Salvo mode and Step mode. 3. Each receiver has 12 cues, each cue could ignite 6-8 pcs products in parallel or 12 pcs products in series. 4. The system can be programmable. If you buy 12 sets, one transmitter can control 144 cues to the maximum while Sequential mode, Salvo mode and Step mode. The receivers learn the code of the transmitter to number the receivers in sequence. It can be 12 sequence numbers while Sequential mode, Salvo mode and Step mode. So you can control 144 cues to the maximum. 5.Test Function: The led of cue will turn off if the corresponding product is connecting well. 6.Short protection: The receiver can not be damaged by a short in cue. 7.Low voltage indication. 8.Transmitting Rang: 1000M. 9.Frequency: OOK, 433MHZ 10.Power supply of receiver(not included): You can use internal or external power (1)Internal power: 8 x AA battery (2)External power: DC10-28V 11.Power supply of transmitter(not included in the item): 9V battery 12.Receiver size: 165x105x55mm 13.Four working modes (1)Single mode. Just ignite the corresponding receiver according to the button of the transmitter which you press. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter. The sequence number could be 1,2.....12. Then press the button “0.1-1.0” of the transmitter, all the cues will be ignited at a identical time interval(0.1-5.0 seconds). Switch the Function Switch of the receiver, you can set the interval time. (3) Step mode. Press the button “Step” of the transmitter to ignite one by one from the first cue to the last cue. it will ignite according to the sequence number of the receiver.(4) Salvo mode. Press the button “All” of the transmitter to ignite all cues at the same time.