1. 24 cue Remote control system, include two receivers, one remote transmitter, two external battery wire jumpers, one carry case2. The system has four working modes. Single mode, Sequential mode, Salvo mode and Step mode3. Each receiver has 12 cues, each cue could ignite 6-8 pcs products in parallel or 12 pcs products in series4. The system can be programmable. If you buy 12 receivers, one transmitter can control 144 cues to the maximum while Sequential mode, Salvo mode and Step mode. The receivers learn the code of the transmitter to number the receivers in sequence. It can be 12 sequence numbers while Sequential mode, Salvo mode and Step mode. So you can control 144 cues to the maximum.5. Test Function: The led of cue will turn off if the corresponding product is connecting well.6. Short protection: The receiver can not be damaged by a short in cue7. Low voltage indication8. Transmitting Rang: 1000M9.Frequency: OOK, 433MHZ10. Power supply of receiver(not included): You can use internal or external power (1)Internal power: 8 x AA battery (2)External power: DC 10-28V11. Power supply of transmitter(not included): 9V battery 12. Receiver size: 165x105x55mm13. Four working modes (1)Single mode. Just ignite the corresponding receiver according to the button of the transmitter which you press. (2) Sequential mode. Firstly, you should number the sequence of receiver while it learns the code of the transmitter. The sequence number could be 1,2.....12. Then press the button “0.1-1.0” of the transmitter, all the cues will be ignited at a identical time interval(0.1-5.0 seconds). Switch the Function Switch of the receiver, you can set the interval time. (3) Step mode. Press the button “Step” of the transmitter to ignite one by one from the first cue to the last cue. it will ignite according to the sequence number of the receiver.(4) Salvo mode. Press the button “All” of the transmitter to ignite all the cues at the same time.
Trustpilot
1 week ago
3 weeks ago