Mount-It! Dual Monitor Arm Wall Mount Workstation with Keyboard Tray & CPU Holder, Height Adjustable Gas Spring Full Motion Computer Station, Fits 17–32” VESA 75x75 100x100, Black

Works wonderful. Mount was Great to set up. Had a full PC but had turn return the PC. Looked awesome and was easy to store and put away. Be sure to have some one help you with placement of bar. About 6 inch above eye level when sitting should be suitable for placement.

More range of motion for the monitors would be nice but it's sufficient for my two monitor setup. Keeps them off the table and prevents them from shaking while I'm typing. Very sturdy. I did not use the keyboard on computer mounts, just the monitor mounts.

Once I got it installed, I love it. You mount the main bar to the wall, then attach the keyboard arm and monitor arms to that bar. However, the keyboard arm didn't fit properly around the bar. It was just a hair too tight, so I had to pry it open with pliers while trying to slide it onto the bar. Doing this put too much pressure on the bar and ripped it right out of the wall. I then decided to put the keyboard arm on the bar first and then attach the whole thing to the wall. It took a lot of work to get the keyboard arm on, but once it was on, it will work fine. I'm a bit disappointed because I was planning on sliding the keyboard arm and monitor arms up and down the bar when needed, but they're too tight so they'll need to stay stationary. One other complaint: the keyboard tray is held on by screws that go under the keyboard. But the screw heads are huge and will definitely scratch against the underside of my keyboard. So I'll need to find a way to protect against that. Overall, I decided to keep it once I got it up. It looks great, and saves me a ton of space. Plus, it's the only mount I could find that included a keyboard tray mount. But the install was very frustrating.

For the last four years I have been using an Ergotron Workfit S sit/stand desk that mounts to a desk. A piece broke and it was not repairable, so I found this one. My work fit desk was about $500 four years ago; so this one is a much better price! As far as functionality, I think this one wins over the work fit station. With the work fit station I was limited by my desk's height in how low I could position the keyboard. I’m short, so I could never get it low enough. But this model mounts to the wall, so I was in total control of how high the keyboard was from the floor. Another limitation of my old work fit station, was that I could not get the monitor and the keyboard far enough apart; if the monitor was the right eye height, the keyboard was too high. If the keyboard was the right height, then the monitor was too low. With this wall mount desk, I have a lot more flexibility in the height differential. I am able to adjust just about every single angle of all of the components . You can have the monitors close to your face or push them back further. You can rotate them towards your face or towards the side. I can also put the monitors vertically stacked… with one above another. Of course in this day and age I do not have a CPU, but I used the CPU wall mount to hold my laptop and docking station. I have a small docking station so I was able to tuck it behind the laptop. My laptop opens completely flat, so I have it open and leaning against the wall (this way I can use my WebCam in my laptop if I want to… I just need to rotate one of the other monitors to the side out of the for the duration of my WebCam call... but the monitors are still usable even when exposing my laptop WebCam ). This desk has *really* good cable management features and is very sturdy. It was not especially difficult to install. Really, for the price you just can’t mess with this one. The one complaint I have, is that the directions were not very helpful and helping me determine how high on the wall to hang it. I initially hung it, installed part of it and thought I had messed up. So I drilled two new pairs of holes…only to find that my first set of holes were correct after all. If I had had more information on how to choose the height of the desk mount, I would not have those extra four holes in my wall. Overall, I am extremely happy with this product and its functionality; I would definitely recommend it.

I wanted a work from home standing desk setup where it could easily switch from sitting to standing, use my existing desk, and lift my monitor off the desk. This wall mount was the best option out there and I am 100% satisfied with it. It securely mounts into a wall stud. I was careful with the installation process to ensure it would be secure and straight on the wall. The range of motion is fantastic, I can keep the monitor close to the wall to have plenty of ergonomic room between me and the screen. The bracket comes out about 3 inches if you swing the mounting arm as close to the wall as possible. It can tilt if needed and the height range is wonderful- you could move the monitor vertically about 40 inches if you adjust the height along the full length of the mount (do have to move your cable routers). I have been using this for about a month and adjust it up and down (for height along the mounting post) to switch from sitting to standing about twice a day. I use the Allen wrench to loosen the mount’s clamp on the mounting post and the screw and clamp are holding up well. I did not use or have need for the keyboard stand or cpu mount.

I needed to mount a monitor, keyboard, and computer on a wall and this product is perfect for that use. I really like that the height of the monitor and keyboard shelf are adjustable. I use this as a workstation in a highly traffic room where it needs to be pushed up against the wall when not in use and pulled out when in use. The movement is fluid and it is very stable. It was very easy to mount on the wall and assemble. I also like its modern style and minimalistic footprint.

We are now able to swing the system between two workbenches and not consume bench space.