Camera Sleeve

I bought this sleeve for traveling light with my Sony A7C II w/cage + Sony 20-70 f/4 and the fit is a tad tight but very workable. By pulling the sleeve tight the velcro attaches and provides a nice, snug sleeve for my camera. I'm carrying it in my backpack vs a dedicated case to save on space, so this sleeve meets my needs perfectly. The zipper pocket is nice for a spare memory card or lens wipe, but not much else.

I really like this camera case. It's sleek and snug, but not too tight. I used it to keep my camera protected when walking around. Rather than feeling like I had to pull it in and out of my bag, I could hold it or wear it on my shoulder with this case and it felt safe. Highly recommend

I have a Sony A6000 with a Sigma 30mm prime lens on it. I initially ordered a different cover because I was trying to achieve a snug fit and figured it would fit the 30mm as well as the kit lens. Well, it was “just” big enough to cover the kit lens and I know I will use my primes a lot more, so I returned it. This case I too large for my a6000 and 30mm, but it will not fall out of the case and I think I can even get the kit telephoto on the camera body and use it for that setup so this case is perfect for me. I like everywhere that it overlaps. It is light, pretty, the stitching seems secure, and I am happy with all but one issue. I cannot understand why the design necessitates the loop (soft) fastener be on the part of the case where it will never have contact with the camera and the hook piece (scratchy...very) is on the flap where it can mistakenly scratch either the camera body or the lens. This is just completely silly to me. It could be an ergonomic thing, maybe, but if they swapped the location of the hook strip and the loop strip this would be 100% perfect for me. I would even buy another one because I am fearful I will be careless a time or two and regret it utterly.

The USA GEAR FlexARMOR X DSLR/SLR Camera Case Sleeve has quickly become an indispensable companion for my photography adventures. This durable, padded neoprene sleeve provides top-notch protection and convenience for my camera gear, and I can't sing its praises enough. Protection (5/5): The primary reason to pick up the USA GEAR FlexARMOR X is its exceptional protection. The high-quality neoprene material is not only rugged but also well-padded to shield your valuable camera equipment from everyday bumps, minor drops, and even inclement weather. The snug fit ensures a secure hold, and the reinforced corners give added peace of mind. My Canon R7 with a larger lens fits perfectly. Design and Durability (5/5): The design is well thought out, featuring a zippered pocket and a Velcro strap for secure fastening. The durable stitching and reinforced zippers make it clear that this sleeve is built to last. It's lightweight and compact, making it easy to slip into a larger camera bag or carry on its own. Versatility (5/5): One of the standout features of this camera sleeve is its versatility. It accommodates a wide range of DSLR and SLR camera models, and there's even room for a larger lens attached to the camera. This flexibility is a real plus for photographers with different camera setups. Additionally, the sleeve comes with an external zippered pocket, perfect for storing small accessories like memory cards and lens caps. Comfort and Portability (5/5): The FlexARMOR X is all about convenience. The padded neoprene not only protects your camera but also makes it comfortable to carry. The neck strap found attached to most cameras extrudes from the sleeve so you can carry your camera around like you normally would--just with a lot more protection. Value (5/5): The affordability of the USA GEAR FlexARMOR X is one of its standout features. Given the quality of materials, level of protection, and thoughtful design, it's a fantastic value for your camera investment. You won't find many camera sleeves of this caliber at such a reasonable price. The USA GEAR FlexARMOR X DSLR/SLR Camera Case Sleeve is an outstanding accessory for photographers of all levels. It provides a snug, protective fit for your camera and lens, offers versatile storage for accessories, and is extremely portable. Whether you're an amateur photographer looking for peace of mind or a professional in need of a reliable secondary case, this sleeve delivers in every aspect. It's a small investment that can save you from costly damage to your camera gear. I highly recommend the FlexARMOR X to anyone seeking a quality camera sleeve that stands up to its promises.

This review is for USA Gear FlexARMOR X, Model GRFXFSL110BKEW as labeled on actual product purchased (see attached photos). The story is that I had been looking for a neoprene case that would nicely fit my compact mirrorless camera with telephoto zoom lens 55-210mm and at the same time it would not be too bulky/roomy when I use pancake style compact 16-50mm lens. I would put the camera in a case and transport it in a backpack, in a messenger or inside of my car's glove compartment. I would not plan to change lens in such cases but I would like to have a spare battery at hand. Actual camera and lens I use are these: Sony A6000 wearing Sony leather jacket LCS-EBE, telephoto zoom lens SEL55210, power zoom lens SELP1650. With the leather jacket on and telephoto lens attached and lens cap on, camera's overall dimensions are (LxWxH): 6"x5.1"x3.1" (this is not accounting for the viewfinder eye-piece). As of 03/11/2016 the model listed here as FlexARMOR X showed different dimensions in the product details and in the product description. In the details section it showed "Interior Dimensions: 5.8" x 4.4" x 2.9"" and in the description it showed "Interior Dimensions: 6.5" x 6.25" x 3"" (none of which are correct, read on). After reviewing pictures of the case, I decided to give it a shot and ordered it. And I'm glad i tried because actual case size worked better that any of two sizes listed on the product page. So, note Actual Interior Dimensions: (LxWxH) 5.8" x 5.5" x 3.0". These internal dimensions fit my A6000 telephoto lens setup like a glove (even with the viewfinder eye-piece attached). Lens compartment can fit lens of larger diameter than SEL55210 and it's a bit loose for the latter. Internal height of the case is exact fit; width of the case has about 0.5" extra room for my 5.1" wide camera and this is actually beneficial since it makes removing and putting the camera back very easy. The case secures around the camera with a velcro on the bottom of the case. The back side of the case has small flat zippered pocket which unexpectedly can fit a spare battery for A6000 and a small plastic case with spare SD memory card. Overall, the case is very nice quality, all materials used in the case look and feel like high quality, seams also look like very well sewn job. There is a loop sewn to the bottom of the case that can be used to attach it to the camera with provided carabiner. Regarding 6mm neoprene mentioned in the description, it is a bit sort of that and actually is about 4mm, which still should provide adequate protection expected from such type of cases. As a surprise finding, this case leaves very little to desire for my A6000 setup. The case could be improved though through adding a couple metal clips over velcro to make it more secure. Also, it would be nice to have a zippered pocket on the side of the lens compartment to comfortably fit a spare battery and a few lens filters. I'll update later if anything good/bad comes up during actual use of the case. P.S. This is not a sponsored review, I just wanted to help fellow owners of mirorless camera sets in their search for this type of cases. As of 03/11/2016 case was reasonably priced at $17.00.

This is exactly what I was looking for. It fits my Nikon Z50 with an 18 - 140 zoom lens perfectly. It is well made and will protect my camera while in the car going to take pictures or simply walking around. The neoprene material should also priotect it from water splashes. I like that the 'lid' wraps all the way around to latch on the bottom of the camera with velcro.

I got this for a Canon T6i that I tend to bump into things, mostly doors and doorways, while I have it slung to the side. Although I would have liked the neoprene to be a bit thicker, it's quite sufficient for the minor bumps and thumps I tend to subject my camera to. I would not want to drop the camera, not even one foot off the ground with this sleeve, but a one foot drop is about as much as I can trust the protection. And one foot is pushing my trust on that. However, swinging it around into things while turning around in doorways is a different matter. When the sleeve is closed with the camera inserted, the sides of the lens are not up against the neoprene which is stretched a bit to fit the camera. This leaves a decent amount of air space between the lens and the stretched taut neoprene which provides an additional layer of bumping-lens-on-the-side cushioning. In other words, you can poke that area with your finger and it has a springy action like a trampoline. My Canon T6i fits perfectly with the EF-S 18-55mm f/3.5-5.6 IS STM Lens and reversible tulip shade. Tulip shade must be in reversed store position. The Canon EF-S 55-250mm f/4-5.6 IS STM will not fit at all, even without the shade and even if you try to force stretch the sleeve. It's just too long. When the camera is inserted and the sleeve is about to be velcroed closed, the velcro will not meet the other velcro part unless you pull and stretch the the sleeve. At first this may seem like an annoyance or a design problem or maybe the lens is a bit too long, but in fact it's there on purpose so the neoprene will be stretched around the lens for the above already stated purpose. Only a small amount of pulling and stretching is required, no problem at all. To insert the camera, turn the lower 2 corners on the rear inside out. Insert camera and turn the corners back in. I'm very satisfied with this item and glad I bought it. I think it has a decent value...low cost-high quality ratio.

I bought this case because it was one of the few that would fit the camera and lense, matched my carrying strap. The case however barely fits the camera. I can't get the velcro at the bottom to fully overlap. When I close it the view finder gets squished by the case and that's troubling since the zipper starts at that spot. Overall It's a cute case and kind of fits the camera. It has a good amount of padding too. The quality matched the price value. But the design needs some reworking, and it can be difficult to get your camera in and out of it. I do not recommend this for those of us with mobility issues.

Utilisé avec un Canon D100 et un sigma 17-70. Rentre parfaitement en profondeur, mais est un peu large pour le D100 (je m'en doutais vu son petit gabarit en matière de réflex). Cela ne me dérange pas personnellement car l'appareil n'est pas balloté à l'intérieur. Il m'arrive également de l'utiliser avec un objectif pancake et bien qu'il y est énormément de place autour je trouve que l'appareil reste bien en place et protégé. Le Néoprène matelassé est vraiment de bonne qualité et épais tout en restant compact ce qui est pratique dans un sac dos! l'étui peut également servir à protéger l'appareil des chocs si vous le portez en bandoulière par exemple. Il est très facile de sortir l'appareil et j'aime particulièrement le petit mousqueton qui permet de rapidement accrocher l'étui quelque part sur soi le temps de prendre une photo!

カメラをカバーしつつ予備のSDカードを入れられるポケットがついているのもGOOD!

Great way to protect your camera. My Nikon D3400 fits perfectly in this case and then goes right into my purse. I love that it helps keep the camera protected from all the other things in my purse. Totally recommend this product. It arrived quickly and was exactly as described.

Muy liviana y cubre muy bien la cámara

Die USA GEAR DSLR Kameratasche hat mich wirklich positiv überrascht. Sie ist kompakt, leicht und bietet trotzdem ausreichend Schutz für meine Kamera. Durch das weiche Neoprenmaterial ist die Kamera gut gegen Stöße und Kratzer geschützt, und dank des robusten Reißverschlusses bleibt alles sicher verstaut. Besonders praktisch finde ich den Gürtelclip und die Halteschlaufe perfekt, wenn man die Kamera schnell griffbereit haben möchte, ohne eine große Tasche mitzuschleppen. Auch kleinere Zubehörteile wie Speicherkarten oder Ersatzakkus lassen sich gut in den kleinen Zusatzfächern unterbringen. Die Passform für meine Canon EOS Rebel SL2 ist optimal die Kamera sitzt sicher, ohne zu wackeln. Für Ausflüge, Urlaube oder den schnellen Einsatz zwischendurch ist diese Tasche wirklich ideal. Fazit: Gute Qualität, durchdachtes Design und ein fairer Preis absolut empfehlenswert für alle, die eine kompakte Schutzhülle für ihre Kamera suchen!