DEWALT Drill Press, Magnetic, 2-inch, 10-Amp with 2-Speed Setting (DWE1622K)

Absolutely great tool. Tons of power, the gibs are nice and snug, all the parts fit... I've used a number of other mag drills. Most recently an Evolution and a Jancy Slugger. This is a better tool by far. To those who are complaining about wobble in the quick release either got a bad fit, have damaged/worn out cutters, or just have no idea what this tool is for. The new annular cutters I bought fit perfectly in the quick release and have very little runout. This is NOT a drill press or a milling machine. A few thousandths of runout is normal and acceptable in this kind of tool. That said, it drills VERY true. So far I've punched holes in a bunch of 1/4 and 3/8 mild plate, flange and web of a 10W22, and a bunch of smaller stuff. Absolutely zero complaints. Quick release handle is a great feature. By moving the drill body up on the slide you can use the included 1/2" chuck and NORMAL length twist drill bits. No need to buy a set of stubbies just for this tool. That's a big deal and a huge savings. Mag base grips well and holds the drill in any position. Travel on the powerhead is about 4" so plenty to drill holes in as thick a material as you have bits/cutters for. Overall I couldn't be happier. There are bigger/badder units out there but they are in the $2500 and up price range. For under a grand this is the one.

This tool saved my career. I drill a lot of holes. With a hand drill reaching out two to three feet and applying enough pressure to cut the hole was painful, and resulted in loss of precision. The first photo shows that there is no need to drill the pilot all the way through. Just enough to align the bit - time saver, wrist saver. The second photo shows the accuracy of the cut. The third photo shows a cut made without even a machinist punch. Some holes can be a little bit sloppy ;) It cut my production time in half. I don’t need to take a day off after drilling for a day. If you drill a lot of holes buy this tool. Talk your boss, spouse, parents, your self... into buying this tool. The price is high, but you get what you pay for. It’s a game changer.

This mag drill is awesome. I bought this for my welding department and it is going to save a lot of time. It cuts clean accurate holes that are straight with no burr. The cutting oil system works well. I don't have to worry about my guys forgetting to apply oil. I would buy it again in a heartbeat.

Supero mis expectativas, todo en perfecto estado y original

This mag drill performs great whether using annular cutters or the drill chuck. The 2speed power function is good for your intended application. The magnet holds as advertised. I made a mount for it and use a 4” drill press vise. The oil tank is a bit screwy when empty, but works ok. I don’t plan to use the drill overhead, so am going to solid mount the tank. Overall a great product !!

Good mag drill for the money. This is not a tool for precision work but it’s for great general construction work. There is wobble in the chuck, especially if you use the included drill chuck adapter. I run a small metal fab/welding shop and use this mag drill a lot for clearance holes with drill bits and slugger bits. I have not damaged a slugger bit with the chuck wobble, but I see how that could happen and slugger bits are pricey. If close tolerances are required, this is not the mag drill for the job but no other complaints. Has worked great under frequent use

These things are so handy. Bought one and tried it out in a fab shop and it has worked great so I bought a 2nd one for the guys to use. I didn't realize how often we'd use it and wish I'd have bought it years ago. Edit: bought a 3rd one now. First one has lasted 3 years without issue besides one of my guys knocking it off the table and bending the arbor. Bought replacement parts and have been using it since.

I bought this for a one time project and figured I'd sell it when done. Nope, I really liked the versatility and used it a handful of times more and I'm sure more in the future. I bought an annular cutter set plus have silver and deming drills and it handles both equally. It does have enough travel for those drill bits. I would prefer even slower speed for the drills but the annualars don't seem to mind the speed. Magnet is very strong and is easy to turn on and off. The case is very nice and this is one tool I keep in the case because it stores better that way and isn't used often enough. Some of the listings say 220V but it was 110V.

Arrived as promised. East to set up and use. Two speed gear case works slick. Magnet is very strong. Very good quality.

This is an extremely good drill for the cost. I looked at many other makes and found the Dewalt drill the best drill for the price. I have drilled approximately 100, 1/2" to 1 1/4" holes with it so far and it has work perfectly! Yes, other drills have a few other handy options, but this works great for me in my shop on the farm.

Not the most powerful magnet, but otherwise perfect drill. It works perfectly and it is Dewaltly reliable.

Rapport qualité prix elle esr très bien et facile à utilisé l aimant retient bien la perceuse meme à l honrisontal malgré son poids et la force appliquée lors du perçage je recommande cette perceuse Dewalt

I really wanted a Hougen drill to help and support the company that invented the annular cutter system. But the deal on the Delwalt I couldn't give up. The 1622K is a high quality drill and provides me professional results, came with a annular adjustable chuck adapter. Couldn't be happier.