Super Fast Thin CA Glue – Super Glue Pro Kit with Precision Microtips Anti-Clog Cap & Extra Nozzles – Premium Cyanoacrylate Adhesive for Cracks, Joints, Woodturning, Hobby & Repairs, 2 oz

This stuff is absolutely amazing. It's very thin like alcohol and you can use it on almost everything. I also use it to stabilize soft stone and wood for carving. It's definitely sticky, don't get it on your skin. A small amount goes a long way.

This by far is the best glue I’ve used for furniture repair. It is very thin and can run into the smallest crevices. It sets fast with very little residues. All in all I’m extremely happy. Only thing would be I wish it came with more replacement dispenser adapters.

2nd edit: 10/4/2025 I am upping my rating to 5 stars...heres why: the glue still works just fine and its been a LOOOOOONNNNG time since i ordered this glue. about a year and a half...the watery glue still works, no problem. I've learned to use the super thin nozzles they include, as I find them completely indispensable. they are the best thing to have with glue like this...however I found an amazon product that contains hundred of these little nozzles. they work great and with the watery glue, as well as the gel consistancy, this is a great product that allows me to cover all my needs as far as glue goes. only thing this glue doesn;'t work great on is acrylic, but not many thing work great with acrylic. i found "glass glue" to be the best for that. anyway, a year and half later and this glue is still going strong and helps me immensley when the crack I have to glue is extremely thin.. this watery stuff goes right down into that crack, no problem. end of final edit: everything below this is the original and follow up edits. But all you need to know is I recommend this glue, if you need a fast setting watery glue, here you go EDIT: . The company was kind enough to send me a free sample of their gel consistency which is what is prompting me to edit this review. I was extremely harsh in my first review. Now that I've had the product for a few months I can safely suggest that you give this brand a try. Here are the things that caused me to change my opinion. 1. The thin consistency is marketed as a thin consistency. And they offer any consistency for your particular need. 2. using their gel consistency which does not run at all. which means you can literally get every consistency from "watery" to "unmoving" but with commercial products in the store you can only get 2. gel and original. I would appreciate them Adding the words "watery" or "Flows like Water" or something to explain just how watery the thin consistency is. But I believe Being watery is intended and should be considered a feature. And I have to admit it's easy once you learn the technique of applying it, Now that I've been able to to try the gel, Which does not move I recommend the product. At this point I would say they deserve a five star review but below is the reason I can only go four stars Here are the downsides gloves are mandatory (in my opinion). I also Recommend you keep the glue in the plastic box it comes in just to ensure it doesn't stick anything when not in. use. I also don't want to learn how to properly apply it. it's glue. it shouldn't need a curriculum. The fine tips that they offer and include are basically use once and throwaway because they're clogged at that point I still don't understand why they need to make a new batch every month so my guess is it's due to shelf life The fact that they want me to store this In my refrigerator or some other place where it's below 40°F is almost laughable. It could be due to the watery consistency or it could be due to the shelf life or it could be both. Either way it's concerning. It might not be as strong as the commercial options. It's hard for me to tell because I haven't done a one-to-one comparison. But it does set Pretty quick which I appreciate. Original review is below and should ***NOT*** be considered in your decision I really wanted to like this product but even when I pick up the bottle there's still like residue that has some somehow escaped the bottle while it's sitting upright. My gloves stick to it every single time I touch it It says on the product packaging a "fresh batch is made every month to ensure shelf life" If i had to guess they need to make a new batch every month because this product probably has a terrible shelf life. It's watery.., beyond watery. It pours out like water. It's barely usable because it runs so horribly It says on the packaging that a learning curve is required to apply glue properly... no. This product is like dumping water.. LITERALLY LIKE SQUIRTING WATER and then hoping you can set the bottle down before it sticks to your hand, and before the applied glue runs off the surface and glues your other hand. But have no fear, because it probably overshot the surface anyway. The packaging says to store it below "40°F". ?? so water freezes at 32°... so store it in my freezer? ?? edit end of original review I'm going to suggest you try this company and try this glue. Just make sure you don't get the watery consistency unless that is exactly what you want.

The glue is good and this is a good bottle to use while you use another bottle to keep refilling it. I will say though that I did not get any of the small tips because the stupid package leaked them all out prior to arriving. I had to roll with it cause I can't wait forever. It does dry fast. And it can burn your eyes by just the smell. It also will set anything cloth on fire or at least cause it to smoke super fast. The smoke from it will give you a headache like nothing you ever felt. Use in ventilated area. I did but still got it in my eyes anyway. The smoke that is. If you actually get this in your eyes you will be blind forever. Perfectly clear. Very strong holding power. Use gloves and eye protection. Nitrile gloves worked for me but with cotton balls it will melt the gloves and still burn you. Needless to say... be careful

Fast as in dries fast. If you get it on your hands you'll know what that means. Thin, as in it's runny, almost like water if water made everything stick together, so handle with care. This comes with some micro tips which I use all the time. (this isn't my first super fast thin glue rodeo) And the anti clog cap works, so it's a pretty good value. Now - a safety tip... Don't get it on you and something else. It's warm to the touch, and that's something you don't want to find out by touching it and getting it on your hands but say, if you did, it will feel warm. Clean off immediately, in soap and water, or vegetable oil. Acetone or that Goo Gone stuff will work too. It's not as rigorous as the old school, regular "super glue", but it's not be messed with.

Great product. love the extra nozzles that are narrow and long. Work great.

I thought that I knew blue until I bought this bottle. This glue is very strong. It bonds to surfaces in seconds it dries no need to put it under fan because it self drives in minutes if not seconds it is a great little tool to have if you're in RC or arts and crafts or anything that you're building that needs to be bonded together. Leaves a great finish no signs of glue dries clear. I know a lot of other glues out here that do not dry as fast and good and are way more expensive this one is a great value for your money so I vote Yes. One thing though be careful on giving this to kids because this glue gets so hot I felt it burning and I had gloves on. But that's because I was being careless and wasted it yeah so I vote Yes

This stuff is fantastic. I have the medium and thick also and use it primarily for filling voids and holes in wood/epoxy projects. Inside this stuff mostly for filling voids in plywood. I stuff the hole/void with sawdust that I collect from my dust separator or sander then soak the whole void with this glue, give it a spray with the activator and it’s ready to sand in 15 seconds. It really saves SO much time and the re-doing of plywood projects (although you could use this for any wood with the same results) and keeps me on track with little disruption. The combo of glue and activator spray is phenomenal. I also like that Starbond comes in different colors as I like the black when I use black epoxy. You simply can’t see the difference. Wood repairs simply aren’t visible when you use the sawdust from the wood you’re using. Another tip I picked up is that, if your sawdust is too course, use a spice/coffee grinder to make the chips smaller and more fine. It works so well and has helped me tremendously. I know this sounds like I work for Starbond or get this stuff free but I’m just a hobbyist that likes products that save time and effort. Finally, I choose Starbond specifically as it comes with a selection of extremely fine tips that allow me to get the smallest of holes filled with no overflow or spillage. It helps keep repairs pretty much invisible.