KEENZOLong Extended Flat Top Scope Mount Base Riser 20mm Picatinny Rail Mount High Profile

It is a great rail honestly, the quick detach system when done tight it 100% secure you know it will never come off rather than just normal screws. Nice quality and for the price i really cant complain. 5/5 stars from me, thank you for the rail.

I fit it onto my Umarex SA10 and it fit on well and was sturdy not sure how it will behave when fired I haven't tested it in that scenario but I'm sure it won't be any different. But it is worth buying if you have a blowback pistol which has unremovable rear sights to fit a rail.. it sits high and away from the slide so no chance of it leaving marks and scratches..Edit: the Umarex SA10 is a field strippable gun but not with this rail attached to it. To get the slide off due to a jam or whatever you have to take the rail off so that's a negative about this rail design...

Very happy with the quality of the adapter. Unfortunately it is absolutely useless if the rifle does not have a flat above the dovetail. Bought this to fit a scope to an air rifle but because the section between the dovetail is curved the adapter cannot seat correctly and so does not engage in the dovetail rail.This is my fault for not checking before ordering.

These were perfect for attaching a small power pack to my night scope. Glued the dovetail side to my power pack.. Presto picatinny mounted power supply😁

Good product for the price. Well made does the job.

this sight mount is used with red dot sight. it is used to raise the dot sight too eye level with an air rifle with a none adjustable cheek rest. an excellent purchase

Feels reasonably well built. Cheaper quality metal than I'd like though, if it takes a bump I think parts may snap off. But that's par for the course with low cost accessories.My big issues with this mount are the amount of grinding with a rotary tool I'm going to have to do to allow it to fit firstly onto the gun. The locating notches on the top of the MP5 receiver are too large to sit inside the grooves on the rail so the rail will need modifying in this area just to allow it to sit on the gun. (for the record, I'm mounting this to an ICS MP5A5, but it's the same dimensions as TM/CA/JG etc)I wanted to mount a T1 red dot and a runcam 2 onto this mount. unfortunately the space in the main rail area isn't large enough for a T1 to mount. So it will have to be filed away slightly. The same might be the case to fit the Runcam to the foreend of the rail.

Very pleased with this the rail fits perfectly, delivery was fast and the product was very high quality for the price, plus came with the correct tool to set it up straight out the box so took all of a minute to construct - was pleasantly surprised to find this was full metal not a polymer and is a perfect addition to my Beretta px4 storm .177 air pistol - the extra side rail is a nice touch. Overall very pleased!

Ho comperato questa prolunga picatinny per sovrapporla ad un'altra per il montaggio arretrato di un red dot e un magnifier x5.Nonostante il prezzo ridotto il prodotto risulta ben fatto e monta alla perfezione sulla slitta base, resiste bene alle sollecitazioni del 7,62x39 senza problemi e non vibra.Molto soddisfatto del pezzo, l'unico consiglio che vorrei dare al produttore è di utilizzare un dado da 13 e non da 12 millimetri, in quanto il 13 (e i dispari in generale) è la misura più diffusa al mondo

Pas bonne taille

Monté sur un pistolet à plomb HW40 pour installer un micro point rouge. J'ai retiré les ressorts de rappel inutile à mon sens.Fait parfaitement le job.

Cet adaptateur est parfaitement compatible avec une queue d'aronde de 11mm pour obtenir un rail picatiny de 21mm. Le système de ressort donne un marge de manoeuvre en largeur, ce qui permet d'éviter tout problème de compatibilité juste pour 1 ou 2 mm.

Non serve descrivere molto, si sa bene cosa sia ed a cosa possa servire.Avevo solo il dubbio della solidità: una prolunga per la slitta integrata al paramano del mio HDX, con azionamento a pompa... avrebbe retto?Beh, la sto trattando "malissimo", senza delicatezza o mezze misure. Rigida il giusto e leggermente flessibile l'essenziale, quanto basta.Davvero consigliata per qualsiasi slitta. Se regge un sottocanna, va benissimo per ogni cosa.