Molex -1 Complete Set - (9 Pin) w/14-20 AWG, Wire Connector - 2.13mm D, Latch Lock, MLX

Good connectors and had zero issues connecting things up.

used to repair 9 pin connector in a sevcon controller set up (TUG 660E beltloader)the crimp end is not barrel type crimp - its a w style crimpi recommend replacing both end of connector for best fit

Good quality terminals and housing. A bit pricey IMO but it got the job done

Easy to work with

Very nice quality connector.Kit came with 10 pins (connector only required 9), so there was one extra of each (male and female) to practice with. For crimping the open barrel connectors: I used the 2.8 mm size die for the end which secures the bare wire and then for the part which folds over to hold the insulation I used the 3.4 mm crimping die - worked flawlessly.Here is a link to the exact crimping tool I used (Precision Universal Crimping Tool with Inter-Changeable die Plates (Size L) Handy Crimp Tool. Made in Japan. ENGINEER pad-13, Orange):https://www.amazon.com/gp/product/B00IWD9XKU/

Everything was as expected

All the part came in. Nothing damaged the connectors go together like they should.

I ordered a new furnace blower motor that had the wrong connector. It had 6 pins with the same style, but I needed 9. I didn't want to use wire nuts so I looked at all different 9 pin connectors and I guessed right. Then I used an automotive pin removal tool and I planned on using the new pins, but the old ones came out perfect. I plugged them in and it took about 15 minutes. Connector worked good and now I have spare new pins.