Garage Door Remote Universal Gate Remote Control Cloning Homelink Key Fob Programmable Learning 4-Buttons Multi Frequency 280MHZ-868MHZ 2019 Upgraded New Version

It is easy to program. It works at a pretty good distance. The battery lasts a long time.

The first couple of attempts it did not work. But after it learned the first one, the other three were a breeze. Keep both clickers looking at each other and off the table..in air. Follow instructions by pressing 1 steadily while pressing 2 four times until it blinks. Keep pressing the old clicker until the new one blinks faster. Let go off old one and press the desired button on new unit. A mirror with homelink would cost north of $300 and installation is a nightmare. For several dollars, just stick this with velcro on the visor and you are set. It learned three different clickers . It's effective, good value, light and looks good.

Did exactly what it promises to do. I have consolidated control of 2 garage doors and a gate, no hiccups. It's worth mentioning that if it doesn't run your garage door right off the bat, you can usually 'learn' it in after you've saved the code to a button. I used this to clip it onto my visor. Cheap fix: https://a.co/d/07Dn0u6g

Easy to set up if you read the directions, easy to mess up if you don’t. Was able to quickly set up my garage and love the modern slim look of the remote

The ad says "Smart Design – Works like the Homelink Remote in your car." This is not true. Once I clone one of my working remotes to the XIHADA a SECOND step is needed and that is to have my opener LEARN the XIHADA. That is so bogus. HomeLink completely clones remotes without needing to have the opener LEARN about the HomeLink. This is what I expected the XIHADA to do and it does not do it.

The product works fine as a standalone device. However, if you have an outdoor keypad that opens your garage door, it’s likely this device and the keypad are incompatible. If you program one, it will erase the other, and vice versa. I had to return mine, because the keypad outside is a necessity.

I was looking for a garage door opener that is compact and that can send out multiple signals (gate, garage door, etc) This remote is capable of duplicating the dip switch remote and Chamberlin remote. The only downside I can think of right now is that the product is unnecessarily thick. Don't get me wrong, the product is thin compare to any other OEM remotes, but when I took it apart, the whole product can be as thin as PCB plus a layer of plastic buttton. you can see a lot of wasted space internal to the product. it really can be 1/3 of the thickness if it really wants to be. Also, get an Exacto knife and integrate the clip as mentioned by another user. The mounting clip adds too much bulk. All and all, excellent product.

REASON: My apartment complex has an Act-34B linear gate remote at property entry for cars and bikes. I also rent a garage which has a Overhead Door brand (I know, not the most innovative name) garage door opener, Model 1026, which uses a O3T-A remote. Well my car has a Homelink system which I have programmed to open both of them. But when I take my bike out for a ride, I had to carry two separate remotes which was a pain. PRODUCT DESCRIPTION: I got the upgraded XIHADA model (one with "corner" design on buttons for numbers). Dimensions for this remote are 68mm x 38mm x 11mm. Shape is "bar" (also known as a slab, block, candybar). The external casing is all plastic SETUP: BUTTON #1 : The Act-34B replication was pretty easy as the instruction manual said. 1. On XIHADA hold button 1 and press button 2 four times. LED will flash every 2 seconds. It is ready to learn. 2. Press the button on original (Act-34B in my case) until XIHADA LED is now flashing quicker than before. 3. Now press the desired button on XIHADA once. BUTTON #2 : Replicating the O3T-A took me a while. My dumb*** didn't read the instructions. You will need the O3T-A already programmed and able to open the door. 1. Perform the exact same steps 1,2 and 3 from previous instructions. I used XIHADA button 2 this time. 2. Now approach and remain within range of your garage door opener and press the learn-code button on the mechanical unit. Press same button on XIHADA (button 2 in my case). For Overhead Door Model 1026, I had to press the button 2 twice on XIHADA after enabling learn mode. TIPS: 1. Google your garage door model specific remote setup process before you begin. 2. Reset the garage door opener. In my case, I didn't know if I had exceeded the learn limit. I started from scratch.